Académique Documents
Professionnel Documents
Culture Documents
In many cases, enclosures are desired to give a project a professional look. FEZ Tinkerer kit gives your next project a professional look in a quality enclosure. While the Arduino shield technique used by FEZ Panda II make it easier to extend the system, it also makes stackable shield difficult to contain in an enclosure. This is not a problem in FEZ Tinkerer kit as shields can be stacked and also connected side-by-side, thanks to the included Base board. The Kit includes the following items:
Enclosure's screw s
Short screw s
Copyright 2011 GHI Electronics, LLC Join our community at www.TinyCLR.com www.GHIElectronics.com
Assembly
Minimal soldering skill and a soldering iron (not included) is required to assemble FEZ Tinkerer Kit. The first thing to do is to solder all headers as showing in picture below. Note that the header strips are long so you need to break off the pin count you need. Do not be alarmed if you have extra headers after you are done.
Copyright 2011 GHI Electronics, LLC Join our community at www.TinyCLR.com www.GHIElectronics.com
You can also plug FEZ Panda II right into FEZ Connect and they both connect to the base board upside-down. An extender header (not included) is required if the 40pin header needs to connect to the base board.
Note: FEZ Tinkerer Kit is optimized for FEZ Panda II but using original FEZ Panda or FEZ Domino is possible as well, even using an Arduino is possible.
Copyright 2011 GHI Electronics, LLC Join our community at www.TinyCLR.com www.GHIElectronics.com
Adding a Display
FEZ Touch can plug directly in to the base board as showing below.
When everything is in place, it might be desirable to mount the display in a different place. This is easily accomplished by adding a male to female 40-pin IDE hard drive extender cable(not included). An example is showing in picture below. Here is an example http://www.pccables.com/01811.html
Note that this cable is standard 0.05 spacing cable with 0.1 end sockets, making it is possible to make the cable yourself.
Copyright 2011 GHI Electronics, LLC Join our community at www.TinyCLR.com www.GHIElectronics.com
Copyright 2011 GHI Electronics, LLC Join our community at www.TinyCLR.com www.GHIElectronics.com