Académique Documents
Professionnel Documents
Culture Documents
JFE Steel Corporation who holds ISO 9001, QS-9000 and ISO 14001 certifications, produces a wide range of hot rolled steel sheets at the worlds strongest and most efficient integrated steel works. Supported by advanced facilities, abundant know-how, and a high level of operational technology, JFE has developed a wide range of new products which meet customer requirements for dimensional accuracy, mechanical properties and available size range.
Characteristics
1. Consistent high quality JFE products consistently realize the worlds highest levels of quality thanks to an integrated quality control system which extends from order receiving through product shipment. JFEs production system is fully computerized and boasts advanced equipment and technologies. 2. Wide product line-up Hot rolled products are produced under various public and JFE standards, and include the full line-up from general use to high strength steel. Regarding surface of products, JFE supplies non-pickled and pickled products. 3. Wide size range and superior dimensional accuracy With a 5-mill production system, JFE produces a wide range of hot strip sizes, including thickness from 1.2mm to 25.4mm and widths from 600mm to 2,300mm, which is the worlds widest hot rolled strip. Advanced production technologies ensure high dimensional accuracy. 4. Outstanding technical servicing system JFE works closely with customers in selecting the optimum material for the users application, and advises customers on production methods, considering property requirements. The company also cooperates in pre-use trials and provides technical assistance and follow-up on quality information.
Contents
Characteristics 1 Manufacturing process 2 Products, characteristics and application 4 JFE Standard 6 Available product size range 18 Dimensional tolerance 22 Packaging and labeling / Instructions for ordering 25 Excerpts from public standards 26 Correspondence with JFE standards to public standards 37
Manufacturing process
JFE produces highest quality products with high end technologies.
Finishing train
Coiler
Iron ore
Coke
Rougher
Endless rolling at Chiba No. 3 continuous hot strip mill Endless rolling is a dream technology which enables continuous rolling of hot strips by in-line welding of sheet bars with 30-40mm thickness, thereby realizing stable rolling and also making it possible to develop new products.
Blast furnace
Sizing press
Reheating furnace
Converter
Vacuum degasser
Hot rolled coil Reheating furnace Shearing line Hot rolled sheet Pickled sheet Checkered plate
Continuous caster
Scale breaker
Rougher
Finishing train
Skinpass mill
Pickling line
Pickled coil
Slitter line
Slit coil
Manufacturing process
Manufacturing process
Public Standard
SB
SM
G3113
SAPH
Hot rolled atmospheric corrosion G3114 resisting steels for welded structure Steel plates for pressure vessels G3115 for intermediate temperature service G3116 G3125 Steel, sheets, plates, and strip for gas cylinders Superior atmospheric corrosion resisting rolled steels Hot rolled mild steel plates, sheets and strip
SMA
SPV SG SPA-H SPHC SPHD SPHE SPHT SPFH SN S-C S-CK SCr SCM SK SKS PCYH
G3131 G3132
Hot rolled carbon steel strip for pipes and tubes Hot rolled high strength steel G3134 sheets with improved formability for automobile G3136 Rolled steels for building structure G4051 Carbon steels for machine structure
G4104 Chromium steels G4105 Chromium molybdenum steels G4401 Carbon tool steels G4404 Alloy tool steels C2555 Steel sheets and strip for pole core
Foreign Standards
Classication ASTM Standard BS Standard DIN Standard EN Standard ISO Standard SAE Standard API Standard
Ship's Class Standard JFE Steel produces the products based on following societys standards.
Society NK, ABS, BV, CR, LR, DNV
JFE Standard
Classication Hot rolled steel sheets for automobile use Designation Page JFE-HA 6 Characteristics and Application Quality with wide range of formability. Various types of hot rolled steels are available. Because of good formability same as cold rolled one, press formability is improved. Low carbon steel is suitable to extra deep drawing parts like compressor chambers. High corrosion resistance against seawater splashes. It is applicable to port facilities, quays, off shore structures. High corrosion resistance to sulfuric or hydrochloric acid. It is suitable to equipments exposed to sulfuric corrosion atmosphere. Also it has superior atmospheric corrosion resistance, formability and weldability. With good formability at room temperature. It has superior anti-oxidation and strength under high temperature atmosphere. It can be applied to boiler skin casing, chimney, duct and other parts which need heat proof property. Steel aiming good flatness and appearance. Having superior surface appearance and shape, it is suitable to application needs good shape and fine appearance as exposed parts. Both-side porcelain enameling is possible. It has also superior porcelain properties like anti-fish tail, adhesionability and anti-strain during baking. Specifying tensile strength levels. It is used as rolled. It has superior formability and weldability. It contributes to weight saving by inducing higher strength. With simple and beautiful stripe patterns , it has good anti-slip and good water-cut property with good weldability and formability. By specifying finer strength levels than JIS, it is suitable to various application. Having superior atmospheric corrosion resistance and corrosion resistance, it has also sufficient strength, weldability and formability for structural uses. Stabilized rust after two years has no progress. It is applied to exposed parts of buildings.
Hot rolled steel sheets JFE-HDN with good press JFE-HEN formability JFE-HFN Hot rolled anti-sea water corrosion steel JFE-MARIN sheets Hot rolled corrosion resistance steel JFE-ASA sheets Hot rolled steel sheets for high temperature JFE-HHCR atmosphere Hot rolled flat steel JFE-HDH sheets for exposed use Hot rolled steel sheets for porcelain JFE-HPE enameling Hot rolled high strength steel sheets Hot rolled checkered plate Hot rolled steel sheets for electric resistance welded pipe and tube JFE-HITEN JFE-HCP JFE-HP
10
11
11
12 13 14 16
17
Container
Gas cylinder
JFE Standard ( 1 )
Dimension tolerance Available product size range
JIS G 3131 for thickness and JIS G 3193 for width are applied. Available product size comes to negotiation.
Mechanical Properties
Applied Thickness mm min.-max. 440 JFE-HA 490 540 440 490 High yield ratio type (HSLA) JFE-HAR 540 590 690 780 Low yield ratio type DP) Excellent stretch ange formability type A Equivalent JFS A Excellent stretch ange formability type B Equivalent JFS B High elongation type (Retained austenite) 540 JFE-HAD 590 780 440 JFE-HASA 490 540 590 440 JFE-HASB 490 540 590 JFE-HAE 590 440 High corrosion resistance type 490 JFE-HAC 540 590 780 440 High corrosion resistance type with excellent stretch ange formability Extra stretch ange formability type NANOHITEN High fatigue strength type Bake hardenability type TS Increase) 490 JFE-HACS 540 590 780 JFE-HANANO JFE-HAH 780 780 370 JFE-HABHT 440 490 590 1.2-14.0 1.4-14.0 1.4-14.0 1.2-14.0 1.4-14.0 1.4-14.0 1.4-14.0 1.4-14.0 1.4-14.0 1.4-6.0 1.4-6.0 2.0-4.0 1.4-6.0 1.4-6.0 1.4-6.0 1.4-6.0 1.4-6.0 1.4-6.0 1.4-6.0 1.4-6.0 1.8-3.2 1.6-6.0 2.0-6.0 2.0-4.0 2.0-4.0 2.0-4.0 1.6-6.0 2.0-6.0 2.0-4.0 2.0-4.0 2.0-4.0 1.4-4.5 2.3-6.0 1.2-4.5 1.2-4.5 1.4-4.5 1.4-4.5 Tensile Strength min. (N/mm2) 440 490 540 440 490 540 590 690 780 540 590 780 440 490 540 590 440 490 540 590 590 440 490 540 590 780 440 490 540 590 780 780 780 370 440 490 590
Reference: 1. The values in parentheses are reference values. 2. BHT means the increase in tensile strength during the baking process. 3. The YR means the ratio of the yield point to the tensile strength. 4. Rolling or Transverse in the column of Testing Direction indicates test piece taken for the tensile test in the rolling direction or transverse to the rolling direction. 5. The bend test is available depending on a demand.
Classication
Designation
Yield Point min. (N/mm2) 255 305 345 305 345 400 430 585 665 (YR 75%) (YR 75%) (YR 75%) 305 325 345 400 305 325 345 400 390 305 325 355 420
8.0 14.0 35 28 25 29 25 22 20 19 17
Test Piece
Other Specication
Commercial quality
JIS No.5
25
21 18 16 14 13
23 21
24 22
JIS No.5
Transverse Transverse Rolling Transverse Transverse Transverse Rolling Transverse Transverse Transverse Transverse Rolling Transverse
28 21 21 18 28 21 21 18
29 22 22 19 29 22 22 19 25 29 22 21 19
80 60 60 55 100 80 80 75
JIS No.5
JIS No.5
JIS No.5
33 25 24 22 15 33 25 24 22 15 16 17 37 34 27 19
JIS No.5
29
80 60 60 55 45 60
JIS No.5
14
14
33 28 24 16
34 29 25 17
JIS No.5
JFE Standard
JIS No.5
JFE Standard
JFE Standard ( 2 )
Characteristics
Classication Low carbon steel Low carbon steel Ultra low carbon steel Designation JFE-HDN JFE-HEN JFE-HFN Drawing quality Deep drawing quality Extra deep drawing quality Reference
Mechanical Properties
Applied Thickness mm
min.-max.
Tensile Test Yield Point min. Tensile Strength min. 1.2 < 1.6
JFE Standard
8
Designation
(N/mm2) (N/mm2)
8.0 14.0 44
40
Reference : JIS No.5 test piece for the tensile test taken to the rolling direction.
Dimension tolerance JIS G 3131 for thickness and JIS G 3193 for width are applied. Available product size range Available product size comes to negotiation.
Chemical Composition
Designation JFE-MARIN Chemical Composition(wt%) C 0.15 Max Si 0.55 Max Mn 1.50 Max P 0.030 Max S 0.030 Max Cu
0.50
Ni 0.40 Max
Cr
0.80
Nb 0.10 Max
Sol.Al
0.55
0.20
0.50
0.15
Mechanical Properties
Tensile Test Designation Applied Thickness mm Yield Point min. (min.-max.) (N/mm2) Tensile Strength min. (N/mm2) Elongation min. (%)
Test Piece
JFE-MARIN
3.2-6.0
365
490 610
25
JIS No.5
Dimension tolerance JIS G 3193 is applied. Available product size range Available product size comes to negotiation.
JFE Standard
JFE Standard
Chemical Composition
Designation JFE-ASA400D JFE-ASA400H JFE-ASA400W JFE-ASA440D JFE-ASA440H Chemical Composition (wt%) C
0.14 max. 0.14 max. 0.14 max. 0.17 max. 0.17 max. 0.17 max.
Si
0.55 max. 0.55 max. 0.55 max. 0.55 max. 0.55 max. 0.55 max.
Mn
0.30 - 0.70 0.30 - 0.70 0.30 - 0.70 0.30 - 0.70 0.30 - 0.70 0.30 - 0.70
P
0.030 max. 0.030 max. 0.030 max. 0.030 max. 0.030 max. 0.030 max.
S
0.020 max. 0.020 max. 0.020 max. 0.020 max. 0.020 max. 0.020 max.
Cu
0.25 - 0.50 0.25 - 0.50 0.25 - 0.50 0.25 - 0.50 0.25 - 0.50 0.25 - 0.50
Ni
0.50 max. 0.50 max. 0.50 max. 0.50 max. 0.50 max. 0.50 max.
Cr
Mo
Sb
0.05 - 0.20
Sn
0.10 max.
JFE-ASA440W
0.05 - 0.20
0.10 max.
JFE Standard
10
Mechanical Properties
Tensile Test Designation Applied Thickness Yield Point mm min. (min.-max.) (N/mm2) 1.6-16.0 1.6-16.0 1.6-16.0 1.6-16.0 1.6-16.0 1.6-16.0 245 245 245 265 265 265 Tensile Strength min. (N/ mm2) 400 400 400 440 440 440 Elongation min. (%) Thickness mm
5 16
5< 18 18 18 17 17 17
5<
Testing Direction
22 22 22 22 22 22
JIS No.5
JIS No.1A
Dimension tolerance JIS G 3193 is applied. Available product size range Available product size comes to negotiation. Chemical Composition and applied environment of D, H, W type
Designation JFE-ASAD JFE-ASAH JFE-ASAW Chemicals Cu-Ni-Sn-Sb Cr-Cu-Ni Cr-Cu-Ni-Sn-Sb Applied environment Surface temperature less than 120-130 Mainly considered on the sulfuric acid corrosion. C. Resistance against sulfuric acid corrosion is less than that of JFE-ASAD. Considered on the strength in comparatively high temperature atmosphere. Condition of the environment is not decisive.
Chemical Composition
Designation JFE-HHCR Chemical Composition(wt%) C 0.10 max. Si
Mn 0.40 max.
P 0.035 max.
S 0.035 max.
Mechanical Properties
Tensile Test Designation Applied Thickness mm (min.-max.) Yield Point (N/mm2) Tensile Strength (N/mm2) 330 430 Elon-gation min. (%) 37 Test Piece Testing Direction Rolling direction
JFE-HHCR
1.2-12.7
JIS No.5
Dimension tolerance JIS G 3193 is applied. Available product size range Available product size comes to negotiation.
Dimension tolerance JIS G 3193 is applied. Flatness tolerance The half of the value in Table 9 of JIS G 3193 is the aiming of flatness. Details come to negotiation. Available product size range Available product size comes to negotiation.
11
JFE Standard
Characteristics 1. Superior anti-fish tail property 2. Good adhesionability 3. Less distortion and residual strain during baking 4. Superior formability 5. Superior weldability Chemical Composition
Designation Applied Thickness mm (min.-max.) 1.2 - 13.0 Chemical Composition(wt%) C 0.10 max. Si 0.10 max. Mn 0.70 max. P 0.035 max. S 0.035 max. Others Special additives
JFE Standard
12
JFE-HPE
Dimension tolerance JIS G 3131 is applied Available product size range The available product size range of JFE-HPE steel sheets for porcelain enameling is strip width of 610 mm to 1,925 mm, strip thickness of 1.2 mm to 13.0 mm. Available product size comes to negotiation. Typical Chemical Composition (wt%)
Designation JFE-HPE C 0.025 Si 0.02 Mn 0.25 P 0.012 S 0.008 SolAl 0.010 Ti 0.17
Typical Mechanical Properties Typical mechanical properties are shown below. The strength level comes to negotiation.
Designation JFE-HPE Thickness mm 3.2 Yield Point (N/mm2) 436 Tensile Strength (N/mm2) 512 Elongation % 23
Chemical Composition
Designation JFE-HITEN490 JFE-HITEN540 JFE-HITEN590 JFE-HITEN690 JFE-HITEN780 Chemical Composition (wt%) C 0.18 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. Si 0.50 max. 0.50 max. 0.50 max. 0.60 max. 0.60 max. Mn 1.50 max. 1.60 max 1.60 max 2.00 max. 2.00 max. P 0.035 max. 0.035 max. 0.035 max. 0.030 max. 0.020 max. S 0.035 max. 0.035 max. 0.035 max. 0.015 max. 0.010 max.
Designation
Tensile Test Yield Point min. (N/mm2) Tensile Strength min. (N/mm2)
490 540 590 690 780
6.3 8.0
25 23 20 18 16
10.0
25 23
8.0<
JFE-HITEN490
1.6-10.0
1. JIS No.5 test piece for the tensile test taken transverse to the rolling direction. 2. JIS No.3 test piece for the bend test taken transverse to the rolling direction. 3. The bend test is available depending on a demand.
Dimension tolerance JIS G 3193 is applied. Available product size range Available product size comes to negotiation.
13
JFE Standard
Mechanical Properties
Characteristics Chemical Composition 1. Attractive stripe pattern Designation Application 2. Excellent anti-slip property 3. Excellent water draining property JFE-HCP-1 General use 4. High weldability and formability
JFE-HCP-3 JFE-HCP400-1 JFE-HCP400-3 General use Structural use Structural use
JFE Standard
14
Mechanical Properties
Applied Thckness mm (min.-max.) JFE-HCP-1 JFE-HCP-3 JFE-HCP400-1 JFE-HCP400-3
Refernce :
Designation
5<
5<
Testing Direction
2.3-13.0
245
400 510
JIS No.5
JIS No.1A
Rolling
1. The figures in the parentheses are the reference values. 2. The bend test is available depending on a demand.
40
28.5
40
5. 5
40
40
40
28.5
28.5
28.5
26
Dimension tolerance JIS G 3193 is applied. Available product size range Size outside of the available range is subject to negotiation.
16.0
Strip thicknessmm
10.0
8.0
Available range
6.0
Strip widthmm
15
JFE Standard
36 A
Hot rolled steel sheets for electric resistance welded pipe and tube JFE-HP
By specifying finer strength levels than JIS, it is suitable to various applications.
Chemical Composition
Designation JFE-HP290 JFE-HP320 JFE-HP340 JFE-HP370 JFE-HP410 JFE-HP440 JFE-HP490 JFE-HP540 Chemical Composition(wt%) C 0.10 max. 0.18 max. 0.18 max. 0.25 max. 0.25 max. 0.30 max. 0.30 max. 0.23 max. Si 0.35 max. 0.35 max. 0.35 max. 0.35 max. 0.35 max. 0.35 max. 0.35 max. 0.35 max. Mn 0.50 max. 0.60 max. 0.60 max. 0.30 - 0.90 0.30 - 0.90 0.30 - 1.00 0.30 - 1.00 1.50 max. P 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. S 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. Al total
0.080 max.
JFE Standard
16
Mechanical Properties
Tensile Test Applied Thickness mm (min.-max.) Yield Point min. (N/mm2)
Designation
Tensile Strength min. (N/mm2) 290 320 340 370 410 440 490 540
13.0 16 38 37 36 33 30 29 27 22
Dimension tolerance JIS G 3132 is applied for thickness tolerance and JIS G 3193 is applied for other tolerances. Strip thickness thicker than 13mm comes to negotiation. Available product size range Available product size comes to negotiation.
Chemical Composition
Designation Chemical Composition (wt%) C 0.12 max. Si 0.25 - 0.75 Mn 0.20 - 0.50 P 0.07 - 0.15 S 0.035 max. Cu 0.25 - 0.55 Ni 0.45 max. Cr 0.30 - 1.00
JFE-HCUP
Mechanical Properties
Applied Thickness mm (min.-max.) Tensile Test Thickness mm 1.6 6.0 6.0 < 16.0 Yield Point min. (N/mm2) 345 355 Tensile Strength min. (N/mm2) 480 490 Elongation min. (%) 22 15 JIS No.5 JIS No.1A Rolling direction Testing Direction
Designation
Test Piece
JFE-HCUP
1.6-16.0
Reference : 1. JIS No.3 test piece for the bend test can be used in case of sheet thickness equal to or less than 5mm. 2. In case of the sheet thicker than 6.0mm of JFE-HCUP, maximum Mn content becomes 0.60%. 3. The bend test is available depending on a demand.
Dimension tolerance JIS G 3193 is applied. Available product size range Available product size comes to negotiation.
17
JFE Standard
Strip thicknessmm
Available range
3.0
3.22300
2.0
Strip thicknessmm
1.0
1.2600
0.0
500
1000
1500
2000
2500
Strip widthmm
Available range
3.0 3.22300 2.82100 2.0 2.31800 2.01700 1.61650 1.0 1.2600 1.21290 1.41620
0.0
500
1000
1500
2000
2500
Strip widthmm
As there may be minor changes of the available product size range according to standard, application and method of working, contact and negotiation will be welcomed. Size outside the available range is subject to negotiation. Available size for cut-length sheets or slit coil is also subject to negotiation.
20.0
202100
Strip thicknessmm
15.0
Available range
10.0
5.0
Strip widthmm
Strip thicknessmm
Available range
1.81100
1500
2000
2500
Strip widthmm
As there may be minor changes of the available product size range according to standard, application and method of working, contact and negotiation will be welcomed. Size outside the available range is subject to negotiation. Available size for cut-length sheets or slit coil is also subject to negotiation.
19
4.52100
Pickled coil
Applicable standard270N/mm2 Class (Pickled)
8.0650 8.01340
8.0
6.5600
6.51900
Strip thicknessmm
6.0
4.0
Available range
Strip thicknessmm
2000
Strip widthmm
8.0
6.5600 6.0
6.51900
Available range
4.0
3.01900 2.0 1.2600 0.0 2.31800 2.01700 1.61650 1.21290 1000 1.41620
500
1500
2000
Strip widthmm
As there may be minor changes of the available product size range according to standard, application and method of working, contact and negotiation will be welcomed. Size outside the available range is subject to negotiation. Available size for cut-length sheets or slit coil is also subject to negotiation.
8.0
Strip thicknessmm
6.0
6.0600
6.01890
4.0
Available range
3.21641
4.51890
1.4600
1.41600
0.0
500
1000
1500
2000
Strip widthmm
8.0
Strip thicknessmm
6.0
6.0635
6.01550
4.5600 4.0
Available range
3.81550
2.0
2.0600 1.8650
2.31430 1.81100
0.0
500
1000
1500
2000
Strip widthmm
As there may be minor changes of the available product size range according to standard, application and method of working, contact and negotiation will be welcomed. Size outside the available range is subject to negotiation. Available size for cut-length sheets or slit coil is also subject to negotiation.
21
2.0
Dimensional tolerance ( 1 )
1,800 <2,300
0.21 2 0.25 2
Dimensional tolerance
22
(1) The value shall be applied to the steel sheet and coil up to and excluding 1,600mm in width. (2) The value shall be applied to the steel sheet and coil up to and excluding 2,000mm in width. Remarks: 1. The thickness shall be measured at any point on the steel sheet and coil not less than 20mm from a side edge. For the steel sheet and coil under 40mm in width, measurement shall be made at the mid width there of. 2. The value specified in Table shall not be applied to to the irregular portions of both ends of the steel coil. 3. The tolerances on the thickness of the steel sheet which is not manufactured from the steel coil may be agreed between the purchaser and supplier.
Table : Thickness tolerance specied in JIS G 3132 (Tensile strength 490N/mm2 and more ), JIS G 3116 (Tensile strength 490N/mm2 and more ) and JIS G 3134
Strip width mm Strip thickness mm < 1.60 1.60 ,< 2.00 2.00 ,< 2.50 2.50 ,< 3.15 3.15 ,< 4.00 4.00 ,< 5.00 5.00 ,< 6.00 6.00 ,< 8.00 8.00 ,< 10.0 10.0 ,< 12.5 12.5 , 13.0
Notes:
(3) The value shall be applied to the steel sheet and coil up to and excluding 1,600mm in width. (4) The value shall be applied to the steel sheet and coil up to and excluding 2,000mm in width.
Remarks: 1. The thickness shall be measured at any point not less than 20mm inside from a side edge of the steel strip. For the steel strip under 40mm in width, measurement shall be made at the mid width of the steel strip. 2. The value specified in Table shall not be applied to the irregular portions of both ends of the steel strip.
23
Dimensional tolerance
Reference : 1. Either plus or minus side of the thickness tolerances given in Table may be limited on request. The total tolerances in this case shall be equal to those given in Table. 2. Thickness shall be measured at any point on the steel strip not less than 25mm from a side edge for the mill edge strip 50mm or over in width and cut lengths therefrom, and on the center line for those less than 50mmin width. For the cut edge steel strip 30mm or over in width and cut lengths therefrom, measurement shall be made at any point no less than 15mmfrom a side edge, and on the center line for those less than 30mm in width. Thickness shall be measured at any point inward the scheduled cutting line concerning width for the as-rolled steel plate (with untrimmed edge), and any point not less than 15mm from the aforementioned line for the cut edge plate.
Dimensional tolerance ( 2 )
C Slitted edge
0.3 0.5 0.4 0.5 0.5 0.5 0.5 0.5
< 160
1,600
< 3.15 3.15 , < 6.00 6.00 , < 20.00 20.00 < 3.15 3.15 , < 6.00 6.00 , < 20.00 20.00 < 3.15 3.15 , < 6.00 6.00 , < 20.00 20.00 < 3.15 3.15 , < 6.00 6.00 , < 20.00 20.00 < 3.15 3.15 , < 6.00 6.00 , < 20.00 20.00 < 3.15 3.15 , < 6.00 6.00 , < 20.00 20.00 < 3.15 3.15 , < 6.00 6.00 , < 20.00 20.00 < 3.15 3.15 , < 6.00 6.00 , < 20.00 20.00
0 Not specified
Dimensional tolerance
24
0 Not specified
20
0 Not specified
25
0 Not specified
30
0 Not specified
35
0 Not specified
40
Remarks: For the mill edge steel strip less than 400mm in width than cut lengths therefrom, the width tolerance on minus side may be limited to zero. In this case, the tolerance on plus side shall be twice the values given in Table.
Length tolerance
Table : Length tolerance specied in JIS G 3193
A Normal cut edge Length mm
600 4000 6000 8000 10000 15000 20000
L 4000 L 6000 L 8000 L 10000 L 15000 L 20000 L
Length mm
6300
Thickness mm
6.00 6.00 6.00 6.00
Tolerance mm
+5 +10 +10 +15 0 0 0 0
6300
Steel Hoop
Seal
Protecting Piece
Metal Edge Protector Seal Waterproof Paper Steel Hoop Protective Steel sheet
Chemical Composition
Symbol SPHC SPHD SPHE Chemical Composition C 0.15 max. 0.10 max. 0.10 max. Mn 0.60 max. 0.50 max. 0.50 max. P 0.050 max. 0.040 max. 0.030 max.
Informative Reference : Grade SPHE is manufactured by a special process, such as made of killed steel to improve drawability
Mechanical Properties
Elongation % Bendability Inside Radius Tensile Tensile Thickness Thickness Thickness Thickness Thickness Symbol Strength 1.2mm or 1.6mm or 2.0mm or 2.5mm or 3.2mm or Thickness Test Bending Thickness over to 4.0mm or Piece over to over to over to over to N/mm2 Angle up to over and excl. and excl. and excl. and excl. and excl. and excl. 4.0mm 3.2mm 2.5mm 2.0mm 1.6mm 3.2mm 180 No.5 in rolling direction
Test Piece
SPHC 270 min. 27min. SPHD 270 min. 30min. SPHE 270 min. 31min.
Flat on itself
Thickness 0.5
Chemical Composition
Symbol SS 330 SS 400 SS 490 SS 540 Chemical Composition C
Mn
P 0.050max. 0.040max.
S 0.050max. 0.040max.
0.30max.
1.60max.
Remarks : Alloy elements other than those given in the above table may be added as necessary.
Mechanical Properties
Yield point or Yield Strength N/mm2 Symbol Thickness of rolled steel mm 16 or under Over 16 up to 40 Bendability Tensile Strength N/mm2 Thickness of rolled steel mm Test Piece Elongation %
Angle of Bending
Inside Radius
Test Piece
SS 330
205min.
195min.
5 or under in thickness Over 5 up to 16 in thickness Over 16 up to 50 in thickness 5 or under in thickness Over 5 up to 16 in thickness Over 16 up to 50 in thickness 5 or under in thickness Over 5 up to 16 in thickness Over 16 up to 50 in thickness 5 or under in thickness
No.5 No.1A No.1A No.5 No.1A No.1A No.5 No.1A No.1A No.5 No.1A No.1A
26min. 21min. 26min. 21min. 17min. 21min. 19min. 15min. 19min. 16min. 13min. 17min. 180 180 180 1.5 times the thickness 2.0 times the thickness 2.0 times the thickness 180 Half of thickness No1
SS 400
245min.
235min.
No1
SS 490
285min.
275min.
No1
SS 540
400min.
390min.
540min.
No1
Remarks : 1. The values given in the table shall not be applied to the both ends of the steel coil. 2. No.3 test piece may be used for the bend test for the steel product 5mm or under in thickness.
27
Unit : % Chemical Composition Mn 2.5 x C min.(1) 0.60 to 1.40 1.40 max. 1.60 max. 1.60 max. 1.60 max. 1.60 max. 1.60 max. 1.60 max. P 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. S 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max. 0.035 max.
0.35 max. 0.35 max. 0.55 max. 0.55 max. 0.55 max. 0.55 max. 0.55 max. 0.55 max.
Note : (1) The value of carbon shall be applied the values of actual ladle analysis. Remarks : Alloy elements other than those given in Table may be added as necessary.
Mechanical Properties
Yield Point or Proof Stress N/mm2 Symbol Thickness of steel mm 16 or under SM 400 A SM 400 B SM 400 C SM 490 A SM 490 B SM 490 C SM 490 YA SM 490 YB SM 520 B SM 520 C SM 570 245min. Over 16 up to 40 235min. Tensile Strength N/mm2 Thickness of steel mm 100 or under 400 to 510 Elongation Thickness of steel mm Up to and incl. 5 Over 5, up to and incl. 16 Over 16, up to and incl. 50 Up to and incl. 5 Over 5, up to and incl. 16 Over 16, up to and incl. 50 Up to and incl. 5 Over 5, up to and incl. 16 Over 16, up to and incl. 50 Up to and incl. 5 Over 5, up to and incl. 16 Over 16, up to and incl. 50 Up to and incl. 16 Over 16 Over 20
Test Piece No.5 No.1A No.1A No.5 No.1A No.1A No.5 No.1A No.1A No.5 No.1A No.1A No.5 No.5 No.4
% 23min. 18min. 22min. 22min. 17min. 21min. 19min. 15min. 19min. 19min. 15min. 19min. 19min. 26min. 20min.
325min.
315min.
490 to 610
365min.
355min.
490 to 610
365min.
355min.
520 to 640
460min.
450min.
570 to 720
Remarks : 1. The steel products over 12mm in thickness shall be tested. 2. The Charpy absorption energy in this case shall be expressed by the average of measured values of three test pieces.
JIS G 3113 1990 Hot-Rolled Steel Plates, Sheets and Strip for Automobile Structural Uses
Chemical Composition
Symbol SAPH 310, SAPH370, SAPH400, SAPH440 Chemical Composition P 0.040max. S
Unit : %
0.040max.
Mechanical Properties
Yield Point N/mm2 Elongation (rolling direction) % No.5 Test Piece Symbol Tensile Thickness Thickness Strength up to 6mm or N/mm2 and excl. over to and excl. 6mm 8mm Thickness 8mm or Thickness Thickness over to 1.6 or 2.0 or and incl. over to over to 14mm and and excl. excl. 2.0mm 2.5mm Thickness 2.5 or over to and excl. 3.15mm Thickness 3.15 or over to and excl. 4.0mm No.1 A Test Piece Bendability Inside Radius
Thickness Bending Test 4.0 or Thickness Thickness Angle Thickness Piece over to up to 6.3mm 2.0mm and and excl. or over or over excl. 2.0mm 6.3mm
Flat on itself Thickness 180 0.5 Thickness 180 1.0 Thickness 180 1.0 180 Thickness 1.0 No.3 Thickness trans 1.0 versely Thickness to rolling 1.0 direction Thickness 1.5
SAPH 310 310min. (185)min. (185)min. (175)min. 33min. 34min. 36min. 38min. 40min. 26min. SAPH 370 370min. 225min. 225min. 215min. 32min. 33min. 35min. 36min. 37min. 25min. SAPH 400 400min. 255min. 235min. 235min. 31min. 32min. 34min. 35min. 36min. 24min. SAPH 440 440min. 305min. 295min. 275min. 29min. 30min. 32min. 33min. 34min. 22min.
Remarks : 1. The values specified in the above table shall no to be applied to the irregular portions of both ends of the steel coil. 2. The figures in ( ) are given for informative reference.
Chemical Composition
Symbol SG 255 SG 295 SG 325 SG 365 Chemical Composition C 0.20 max. 0.20 max. 0.20 max. 0.20 max. Si
Remarks : Alloying elements other than those shown in the table may be added if necessary.
Mechanical Properties
Symbol Yield Point or Tensile Elongation Proof Stress Strength N/ % 2 2 N/mm mm 255min. 295min. 325min. 365min. 400min. 440min. 490min. 540min. 28min. 26min. 22min. 20min. No.5 in rolling direction Tensile Test Piece Bendability Bending Angle 180 180 180 180 Thickness 1.5 Inside Radius Thickness 1.0 No.3 in rolling direction Test Piece
Remarks : The values specified shall not be applied for irregular portions on each end of steel strip.
29
Remarks : 1. For the steel over 6.0mm in thickness, the upper limit of manganese content shall be 0.60%. 2. Alloy elements other than those in the above table may be added as required.
Mechanical Properties
Symbol Thickness Yield Point Tensile Tensile Elongation or Proof Strength Test Piece % Stress 2 N/mm N/mm2 345min. 355min. 480min. 490min. No.5 No.1A 22 15 Bendability Bending Angle 180 180 Inside Radius 0.5 thickness (1) 1.5 thickness Test Piece No.1 in the direction of rolling
Note : (1) For SPA-H steel sheet and strip of 6.0mm and under in thickness, inside radius for bend ability may be 1.0 times as large as the thickness subject to agreement between the parties concerned.
Chemical Composition
Symbol SPHT 1 SPHT 2 SPHT 3 SPHT 4 Chemical Composition C 0.10 max. 0.18 max. 0.25 max. 0.30 max. Si 0.35 max. (1) 0.35 max. 0.35 max. 0.35 max. Mn 0.50 max. 0.60 max. 0.30 to 0.90 0.30 to 1.00 P 0.040 max. 0.040 max. 0.040 max. 0.040 max. S
Note : (1) The maximum silicon content may be modified to 0.04% max. by agreement between the purchaser and the supplier.
Mechanical Properties
Elongation % Tensile 1.2mm or Strength over to N/mm2 and excl. 1.6mm in thickness 270min. 340min. 410min. 490min. 30min. 25min. 20min. 15min. 1.6mm or over to and excl. 3.0mm in thickness 32min. 27min. 22min. 18min. 3.0mm or over to and excl. 6.0mm in thickness 35min. 30min. 25min. 20min. 6.0mm or Tensile over up to Test Bending and incl. Piece Angle 13mm in thickness 180 No.5 32min. Test Piece 180 taken in 27min. 180 rollin direction 22min. 180 37min. Bendability Inside Radius 3.0mm or under in thickness Flat on itself Thickness 1.0 Thickness 1.5 Thickness 1.5 Over 3.0mm up to and incl. 13mm in thickness Thickness 0.5 Thickness 1.5 Thickness 0.5 Thickness 2.0 No.3 taken in rolling direction Test Piece
Symbol
Remarks : The values given in the above table are not applicable to the irregular portions at the either end of the steel strip.
Hot Rolled High Strength Steel Sheets with Improved Formability for Automobile Structural Uses
Chemical Composition The chemical composition shall be agreed upon by the purchaser and supplier, if necessary. Mechanical Properties
Elongation % Tensile Strength N/mm2 Yield Point or Proof 1.6 or Stress N/ over to mm2 and excl. 2.0 325min. Thickness mm 2.0 or over to and excl. 2.5 2.5 or 3.25 or over to over up and to excl. and incl. 3.25 6.0 Test Piece Bending Angle Bendability Inside Radius Thickness mm 1.6 or 3.25 or over to over up to and excl. and incl. 3.25 6.0 Thickness 0.5 Thickness 1.0 180 Thickness 1.5 Thickness 1.0 Thickness 1.5 Thickness 1.0 Thickness 1.5 Test Piece
Symbol
SPFH 490
490min.
SPFH 540
540min.
355min.
21min. 22min. 23min. 24min. No.5 test piece 19min. 20min. 21min. 22min. taken in transverse direction
SPFH 590
590min.
420min.
SPFH 540 Y
540min.
295min.
SPFH 590 Y
590min.
325min.
Thickness 1.5
31
No.3 test piece Thickness taken in 1.5 transverse direction Thickness 1.5
Chemical Requirements
Thickness, in [mm] To 3/4 [20], incl. Over 3/4 to 11/2 [20 to 40], incl. Chemical Composition C 0.25 max. 0.25 max. Si 0.40 max. 0.40 max. Mn
Unit : %
0.80-1.20
Tensile Requirements
Yield Point, min. ksi [MPa] 36 [250] Tensile Strength, ksi [MPa] 58-80 [400-550] Elongation in 2 in. [50mm] 23 min. Bend Test
Remarks : For plates wider than 24in.[600mm], the elongation requirement is reduced two percentage points.
ASTM A283 - 2000 Low and Intermediate Tensile Strength Carbon Steel Plates
Chemical Requirements
Symbol C Grade A Grade B Grade C Grade D 0.14 max. 0.17 max. 0.24 max. 0.27 max. Si 0.40 max. 0.40 max. 0.40 max. 0.40 max. Mn 0.90 max. 0.90 max. 0.90 max. 0.90 max. Chemical Composition P 0.035 max. 0.035 max. 0.035 max. 0.035 max. S 0.040 max. 0.040 max. 0.040 max. 0.040 max. Cu
Unit : %
0.20 min. ,when required 0.20 min. ,when required 0.20 min. ,when required 0.20 min. ,when required
Mechanical Requirements
Symbol Grade A Grade B Grade C Grade D Yield Point min. ksi [MPa] 24[165] 27[185] 30[205] 33[230] Tensile Strength ksi [MPa] 45-60 [310-415] 50-65 [345-450] 55-75 [380-515] 60-80 [415-550] Elongation in 2 in. [50mm] % 30 min. 28 min. 25 min. 23 min. Bending Property
Remarks : For plates wider than 24in. [600mm], the elongation requirement is reduced two percentage points.
Chemical Requirements
Symbol Grade 42 [290] Grade 50 [345] Grade 55 [380] Grade 60 [415] Grade 65 [450] Thickness in, [mm] 6 [150] 4 [100] 2 [50] 11/4 [32] max. max. max. max. Chemical Composition C Si Mn (1) P S Cu
Unit : %
0.21 max. 0.40 max. 1.35 max. 0.04 max. 0.05 max. 0.23 max. 0.40 max. 1.35 max. 0.04 max. 0.05 max. 0.25 max. 0.40 max. 1.35 max. 0.04 max. 0.05 max. 0.26 max. 0.40 max. 1.35 max. 0.04 max. 0.05 max.
0.20 min. When specified 0.20 min. When specified 0.20 min. When specified 0.20 min. When specified 0.20 min. When specified 0.20 min. When specified
Over 1/2 to 11/4 [13-32] excl. 0.23 max. 0.40 max. 1.65 max. 0.04 max. 0.05 max. Under 1/2 [13] incl. (2) 0.26 max. 0.40 max. 1.35 max. 0.04 max. 0.05 max.
Remarks : (1) Manganese, minimum, by heat analysis of 0.80% (0.75% by product analysis) shall be required for all plates over 3/8in. [10mm] in thickness; a minimum of 0.50% (0.45% by product analysis) shall be required for plates 3/8in.[10mm] and less in thickness, and for all products. The manganese to carbon ratio shall not be less than 2 to 1. (2) An alternative chemical requirement with a maximum carbon 0.21% and a maximum manganese of 1.65% is permitted, with the balance of the elements as shown in table.
Alloy contents
Type 1 2 3 4 5 Element Composition Nb (Cb) 0.005-0.05
Nb (Cb) + V
Ti
0.005-0.05
0.02-0.15
0.006-0.04
Tensile Requirements
Symbol Grade 42 [290] Grade 50 [345] Grade 55 [380] Grade 60 [415] Grade 65 [450] Yield Point min. ksi [MPa] 42 [290] 50 [345] 55 [380] 60 [415] 65 [450] Tensile Strength min. ksi [MPa] 60 [415] 65 [450] 70 [485] 75 [520] 80 [550] Min. Elongation % in 2 in [50mm] 24 21 20 18 17
Remarks : For plates wider than 24in.[600mm], the elongation requirement is reduced two percentage points for Grade 42 ,50 and 52 [290, 345 and 380], and three percentage points for Grades 60 and 65 [415 and 450].
ASTM A606 - 2001 Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and
Tensile Requirements
Yield point min Tensile Strength Elongation min. ksi [MPa] min. ksi [MPa] % in 2in.[50mm] 50 [340] 70 [480] 22 Bending Property 2t
33
Unit : %
Chemical Composition
Designation CS Grade Type Class Si
Unit : % Cu 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. Ni 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. 0.20 max. Cr 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. Mo V Cb Ti N
0.06 0.008 0.008 0.025 max. max. max. max. 0.06 0.008 0.008 0.025 max. max. max. max 0.06 0.008 0.008 0.025 max. max. max. max 0.06 0.008 0.008 0.025 max. max. max. max 0.06 0.008 0.008 0.025 max. max. max. max 0.06 0.008 0.008 max. max. max. 0.06 0.008 0.008 max. max. max. 0.06 0.008 0.008 max. max. max. 0.06 0.008 0.008 max. max. max. 0.06 0.008 0.008 max. max. max. 0.06 0.008 0.008 max. max. max. 0.06 0.008 0.008 max. max. max. 0.06 0.008 0.008 max. max. max. 0.06 max. 0.06 max. 0.06 max. 0.06 max. 0.06 max. 0.06 max. 0.06 max. 0.06 max. 0.06 max. 0.06 max. 0.06 max. 0.06 max. 0.06 max. 0.01 0.005 min. min. 0.01 0.005 min. min. 0.01 0.005 min. min. 0.01 0.005 min. min. 0.01 0.005 min. min. 0.01 0.005 min. min. 0.01 0.005 min. min. 0.01 0.005 min. min. 0.01 0.005 min. min. 0.01 0.005 min. min. 0.01 0.005 min. min. 0.01 0.005 min. min.
0.02- 0.60 0.030 0.035 0.15 max. max. max. 0.08 max. 0.08 max. 0.60 max. 0.10 0.035 max. max.
DS
Type A Type B
0.02- 0.50 0.020 0.030 0.01 0.08 max. max. max. min. 0.25 max. 0.25 max. 0.90 0.035 0.04 max. max. max. 0.90 0.035 0.04 max. max. max. 0.90 0.035 0.04 max. max. max. 1.35 0.035 0.04 max. max. max. 0.90 0.035 0.04 max. max. max. 1.35 0.035 0.04 max. max. max. 1.35 0.035 0.04 max. max. max. 1.35 0.035 0.04 max. max. max. 1.35 max. 1.35 max. 1.35 max. 1.35 max. 1.35 max. 1.35 max. 1.50 max. 1.50 max. 1.50 max. 1.50 max. 1.65 max. 1.65 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max. 0.04 max.
SS
Grade 30[205] Grade 33[230] Grade 36[250] Grade 36[250] Grade 40[275] Grade 45[310] Grade 50[345] Grade 55[380] Type 1 Type 2
0.25 max. 0.25 max. 0.25 max. 0.25 max. 0.25 max. 0.25 max.
HSLAS
Grade 45[310] Grade 45[310] Grade 50[340] Grade 50[340] Grade 55[380] Grade 55[380] Grade 60[410] Grade 60[410] Grade 65[450] Grade 65[450] Grade 70[480] Grade 70[480] Grade 50[340] 60[410] 70[480] 80[550]
Class 1 Class 2 Class 1 Class 2 Class 1 Class 2 Class 1 Class 2 Class 1 Class 2 Class 1 Class 2
0.22 max. 0.15 max. 0.23 max. 0.15 max. 0.25 max. 0.15 max. 0.26 max. 0.15 max. 0.26 max. 0.15 max. 0.26 max. 0.15 max. 0.15 max.
0.020 max. 0.012 max. 0.020 max. 0.012 max. 0.020 max.
HSLAS-F
Designation
Grade
Type Class
Commercial Grade CS Commercial Grade Commercial Grade DS Drawing Grade Drawing Grade Grade 30 [205] Grade 33 [230] Grade 36 [250] SS Grade 36 [250] Grade 40 [275] Grade 45 [310] Grade 50 [345] Grade 55 [380]
Type A Type B Type C Type A 30 to 45 Type B [205 to 310] 30 [205] 33 [230] Type 1 Type 2 36 [250] 36 [250] 40 [275] 45 [310] 50 [340] 55 [380]
30 to 50 [205 to 340]
25.0 23.0 22.0 21.0 21.0 19.0 17.0 15.0 Over 0.097 in. [2.5mm]
21.0
17.0 16.0 15.0 13.0 11.0 9.0 Up to 0.097 in [2.5mm] 23.0 23.0 20.0 20.0 18.0 18.0 16.0 16.0 14.0 14.0 12.0 12.0 22.0 20.0 18.0 16.0
Grade 45 [310] Grade 45 [310] Grade 50 [340] Grade 50 [340] Grade 55 [380] HSLAS Grade 55 [380] Grade 60 [410] Grade 60 [410] Grade 65 [450] Grade 65 [450] Grade 70 [480] Grade 70 [480] Grade 50 [340] 60 [410] 70 [480] 80 [550]
Class 1 Class 2 Class 1 Class 2 Class 1 Class 2 Class 1 Class 2 Class 1 Class 2 Class 1 Class 2
45 [310] 45 [310] 50 [340] 50 [340] 55 [380] 55 [380] 60 [410] 60 [410] 65 [450] 65 [450] 70 [480] 70 [480] 50 [340] 60 [410] 70 [480] 80 [550]
60 [410] 55 [380] 65 [450] 60 [410] 70 [480] 65 [450] 75 [520] 70 [480] 80 [550] 75 [520] 85 [585] 80 [550] 60 [410] 70 [480] 80 [550] 90 [620]
25.0 25.0 22.0 22.0 20.0 20.0 18.0 18.0 16.0 16.0 14.0 14.0 24.0 22.0 20.0 18.0
HSLAS-F
35
18.0
SAE Standard
J403- 2000
Chemical Composition
UNS No. G 10050 G 10060 G 10080 G 10090 G 10100 G 10120 G 10130 G 10150 G 10160 G 10170 G 10180 G 10190 G 10200 G 10210 G 10220 G 10230 G 10250 G 10260 G 10290 G 10300 G 10330 G 10350 G 10370 G 10380 G 10390 G 10400 G 10420 G 10430 G 10440 G 10450 G 10460 G 10490 G 10500 G 10530 G 10550 G 10600 G 10650 G 10700 G 10740 G 10750 G 10780 G 10800 G 10840 G 10850 G 10860 G 10900 G 10950 SAE No. 1005 1006 1008 1009 1010 1012 1013 1015 1016 1017 1018 1019 1020 1021 1022 1023 1025 1026 1029 1030 1033 1035 1037 1038 1039 1040 1042 1043 1044 1045 1046 1049 1050 1053 1055 1060 1065 1070 1074 1075 1078 1080 1084 1085 1086 1090 1095 C 0.06 max. 0.08 max. 0.10 max. 0.15 max. 0.08 - 0.13 0.10 - 0.15 0.11 - 0.16 0.13 - 0.18 0.13 - 0.18 0.15 - 0.20 0.15 - 0.20 0.15 - 0.20 0.18 - 0.23 0.18 - 0.23 0.18 - 0.23 0.20 - 0.25 0.22 - 0.28 0.22 - 0.28 0.25 - 0.31 0.28 - 0.34 0.30 - 0.36 0.32 - 0.38 0.32 - 0.38 0.35 - 0.42 0.39 - 0.44 0.37 - 0.44 0.40 - 0.47 0.40 - 0.47 0.43 - 0.50 0.43 - 0.50 0.43 - 0.50 0.46 - 0.53 0.48 - 0.55 0.48 - 0.53 0.50 - 0.60 0.55 - 0.65 0.60 - 0.70 0.65 - 0.75 0.70 - 0.80 0.70 - 0.80 0.72 - 0.85 0.75 - 0.88 0.80 - 0.93 0.80 - 0.93 0.80 - 0.93 0.85 - 0.98 0.90 - 1.03 Chemical Composition Mn P, max. 0.35 max. 0.030 0.25 - 0.40 0.030 0.30 - 0.50 0.030 0.60 max. 0.030 0.30 - 0.60 0.030 0.30 - 0.60 0.030 0.30 - 0.60 0.030 0.30 - 0.60 0.030 0.60 - 0.90 0.030 0.30 - 0.60 0.030 0.60 - 0.90 0.030 0.30 - 0.60 0.030 0.30 - 0.60 0.030 0.60 - 0.90 0.030 0.70 - 1.00 0.030 0.30 - 0.60 0.030 0.30 - 0.60 0.030 0.60 - 0.90 0.030 0.60 - 0.90 0.030 0.60 - 0.90 0.030 0.60 - 0.90 0.030 0.60 - 0.90 0.030 0.60 - 0.90 0.030 0.60 - 0.90 0.030 0.70 - 1.00 0.030 0.60 - 0.90 0.030 0.60 - 0.90 0.030 0.70 - 1.00 0.030 0.30 - 0.60 0.030 0.60 - 0.90 0.030 0.70 - 1.00 0.030 0.60 - 0.90 0.030 0.60 - 0.90 0.030 0.70 - 1.00 0.030 0.60 - 0.90 0.030 0.60 - 0.90 0.030 0.60 - 0.90 0.030 0.60 - 0.90 0.030 0.50 - 0.70 0.030 0.40 - 0.70 0.030 0.30 - 0.60 0.030 0.60 - 0.90 0.030 0.60 - 0.90 0.030 0.70 - 1.00 0.030 0.30 - 0.50 0.030 0.60 - 0.90 0.030 0.30 - 0.50 0.030
Unit : %
S, max. 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050
Designation Classication JFE's standard G3131 Steel Sheets for General Uses and Welded Structural Uses G3101 G3106 JIS SPHC SPHD SPHE SS SM ASTM A1011 A36 A283 Others BS1449 Part1 DIN1614-1 BS EN10025 DIN EN10025 BS EN10113 DIN EN10113
Steel Sheets for Automobile Parts Steel Sheets for Pipes and Tubes Atmospheric Corrosion Resistance Steel Sheets Anti-sea Water Corrosion Steel Sheets Corrosion Resistance Steel Sheets Steel Sheets in High Temperature Atmosphere Steel Sheets for Porcelain Enameling Checkered Plate Anti-aging Steel Sheets High Strength Steel Sheets Flat Steel Sheets for Exposed Uses
JFE-HA
G3113 G3134
SAPH SPFH
A1011
JFE-HP
G3132 G3125
JFE-HCUP
JFE-MARIN
JFE-ASA
LFE-HHCR
JFE-HPE
A786
JFE-HDH
37
Cat.No.B1E-001-04
http://www.jfe-steel.co.jp/en/
TOKYO HEAD OFFICE Hibiya Kokusai Building, 2-3 Uchisaiwaicho 2-chome, Chiyodaku, Tokyo 100-0011, Japan Phone : (81)3-3597-3111 Fax : (81)3-3597-4860 JFE Steel America, Inc., New York Office 600 Third Avenue, 12th Floor, New York, NY 10016, U.S.A. Phone : (1)212-310-9320 Fax : (1)212-308-9292 JFE Steel America, Inc., Houston Office 10777 Westheimer, Suite 1010 Houston, TX 77042, U.S.A. Phone : (1)713-532-0052 Fax : (1)713-532-0062 JFE Steel Australia Resources Pty Ltd. Level 19, CPA Centre, 307 Queen St, Brisbane, QLD 4001, Australia Phone : (61)7-3229-3855 Fax : (61)7-3229-4377 JFE Steel do Brasil LTDA, Rio de Janeiro Office Praia de Botafogo, 228 Setor B, Salas 508 & 509, Botafogo, CEP 22359-900, Rio de Janeiro-RJ, Brazil Phone : (55)21-2553-1132 Fax : (55)21-2553-3430 JFE Steel Europe Limited 8th Floor, International Press Centre, 76 Shoe Lane, London EC4A 3JB, U.K. Phone : (44)20-7583-1133 Fax : (44)20-7583-1144 JFE Steel India Private Limited 1101, 11th Floor, Unitech Signature Tower, Tower-A, South City-I, NH-8, Gurgaon, Haryana, 122002, India s Phone : (91)124-426-4981 Fax : (91)124-426-4982 JFE Steel Asia Pte. Ltd. 16 Raffles Quay, No. 15-03, Hong Leong Building, 048581, Singapore Phone : (65)6220-1174 Fax : (65)6224-8357 JFE Steel Corporation, Bangkok Office 22nd Floor, Abdulrahim Place 990, Rama IV Road, Bangkok 10500, Thailand Phone : (66)2-636-1886 Fax : (66)2-636-1891 JFE Steel Corporation, Jakarta Office 15th Floor Summitmas II, JL Jendral Sudirman Kav. 61-62, Jakarta 12190, Indonesia Phone : (62)21-522-6405 Fax : (62)21-522-6408 JFE Steel Corporation, Manila Office 23rd Floor 6788 Ayala Avenue, Oledan Square, Makati City, Metro Manila, Philippines Phone : (63)2-886-7432 Fax : (63)2-886-7315 JFE Steel Korea Corporation 6th Floor. Geumgang-Tower. 889-13, Daechi-dong, Gangnam-gu, Seoul, 135-570, Korea Phone : (82)2-3468-4130 Fax : (82)2-3468-4137 JFE Steel Corporation Beijing 1720 Beijing Fortune Building No.5, Dongsanhuan North Road, Chaoyang District, Beijing, 100004, P.R.China Phone : (86)10-6590-9051 Fax : (86)10-6590-9056 JFE Consulting (Shanghai) Co., Ltd. Room No.2112, Lippo Plaza, 222 Huai Hai Road(M), Shanghai 200021, P.R.China Phone : (86)21-5396-5610 Fax : (86)21-5396-5611 JFE Consulting (Guangzhou) Co., Ltd. Room 3901, Citic Plaza, 233 Tian He North Road, Guangzhou 510613, P.R.China Phone : (86)20-3891-2467 Fax : (86)20-3891-2469
HOUSTON OFFICE
BRISBANE OFFICE
LONDON OFFICE
SINGAPORE OFFICE
BANGKOK OFFICE
JAKARTA OFFICE
MANILA OFFICE
SEOUL OFFICE
BEIJING OFFICE
SHANGHAI OFFICE
GUANGZHOU OFFICE
Notice
While every effort has been made to ensure the accuracy of the information contained within this publication, the use of the information is at the reader risk and no warranty is implied or expressed by JFE Steel Corporation with respect to the use of information contained herein. s The information in this publication is subject to change or modification without notice. Please contact the JFE Steel office for the latest information.
0910R(0703) JTR Printed in Japan