Académique Documents
Professionnel Documents
Culture Documents
11 7 2
4 5
E
3 10
4 6 9
5 10
ITEM NO. PART NUMBER DESCRIPTION 1 K237-01-D1-01 SUCTION CUP MTG PLATE-1 1-189179 ESG-1002 SUCTION CUP SS-HCL-G 1-170925 DFM-253 PNEUMATIC CYLINDER 40-P-A-KF 534337 GRLA-1_8ONE WAY FLOW CONTROL 4 QS-8-RS-D VALVE 5 190658 QSL-1_8-10 PUSH IN CONNECTOR 6 K237-01-D3-06 SUCTION PAD CYL MTG PLATE 7 M6 washer Plain Washers Hexagon Socket Head Cap 8 M6 x 25 Screws 9 10 11
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
QTY. 1 2 1 2 2 1 8 4 2 2 4
Drgno:K237-01-D2
When Tolerance not specified for Hole Positions, Consider +/- 0.1 All dimensions are in mm
When Tolerance not specified
OVER UPTO
Plain Washers Hexagon Socket Head Cap Screws Hexagon Socket Head Cap Screws
---
Material ---
3 10 18 30 50
ANGLE 30'
3 10 18 30
Treatment
KRISAM Automation
Drg no: Desc:
Qty.
4 no.
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation.
Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
--SHEET 1 OF 14
460
11
10 X 45 (typ.)
22.5
45
Drgno:K237-01-D1-01
22.5 thru
When Tolerance not specified for Hole Positions, Consider +/- 0.1 All dimensions are in mm
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
Material AL 6082
3 10 18 30 50
ANGLE 30'
3 10 18 30
Treatment
---
KRISAM Automation
Drg no: Desc:
Qty.
4 no.
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation.
Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
Drg no:K237-01-D3-06
100 12 82
0.1 A
18 5 X 45(typ.)
4x 2x
7 thru 18 THRU
90.5 16 15 12
E
105
125.5
140
16
R4.5 (TYP.) 84 88
When Tolerance not specified for Hole Positions, Consider +/- 0.1
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
When Tolerance not specified OVER UPTO 3 10 18 30 3 10 18 30 50 TOL. OVER UPTO 0.05 0.05 0.05 0.075 0.10 50 80 120 250 375 80 120 250 375 500 TOL. 0.10 ANGLE 30' 0.15 0.20 0.25 0.30
KRISAM Automation
Drg no: Desc:
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation. Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
Qty.
4 no.
Drawn
DRP
Ckd&Apd NCN
SHEET 3 OF 14
510
60
A
C
R5
250
15 (typ.)
80 430
10
R10 (typ.)
SECTION A-A SCALE 1 : 5
E
Drgno:K237-03-D9-35
When Tolerance not specified for Hole Positions, Consider +/- 0.1 All dimensions are in mm
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
3 10 18 30 50
ANGLE 30'
3 10 18 30
Treatment
---
KRISAM Automation
Drg no: Desc:
Qty.
2 no.
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation. Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
3660.91 Sq.cm
7002.01 grams
SHEET 4 OF 14
470
A
65 60
5 80 65
345
C
R5 4x 7 thru
C
63.5
80
90
Drgno:K237-03-D9-34
When Tolerance not specified for Hole Positions, Consider +/- 0.1 All dimensions are in mm
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
3 10 18 30 50
ANGLE 30'
3 10 18 30
Treatment
KRISAM Automation
Drg no: Desc:
0.05 0.05
50 80
Qty.
2 no.
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation. Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
1278.10 Sq.cm
2318.43 grams
SHEET 5 OF 14
130
2x 5 15 M6x1.0 - 6H 12
2x
thru
3 X 45 (typ.)
7 10 84 106 122
15
23
30
Drgno:K237-03-D9-30
When Tolerance not specified for Hole Positions, Consider +/- 0.1 All dimensions are in mm
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
Material M.S.
3 10 18 30 50
ANGLE 30'
3 10 18 30
Treatment
KRISAM Automation
Drg no: Desc:
Qty.
5 no.
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation.
Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
150
2x
thru
5 15 2x M6x1.0 - 6H 12
62 44 10 3 X 45 (typ.) 140
68
Drgno:K237-03-D9-31
12
Material M.S.
ANGLE 30'
3 10 18 30
3 10 18 30 50
Treatment Finish
KRISAM Automation
Drg no: Desc:
0.05 0.05
50 80
Qty.
1 no.
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation.
Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
Drg no:K237-03-D9-29
88
B
5 15 2x M6x1.0 - 6H 12 2x
C
thru
R5 (typ.)
62.5
D
68
22.5
26.5
8 26
E
45
When Tolerance not specified for Hole Positions, Consider +/- 0.1
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
When Tolerance not specified OVER UPTO 3 10 18 30 3 10 18 30 50 TOL. OVER UPTO 0.05 0.05 0.05 0.075 0.10 50 80 120 250 375 80 120 250 375 500 TOL. 0.10 ANGLE 30' 0.15 0.20 0.25 0.30
KRISAM Automation
Drg no: Desc:
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation. Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
coated, Blackened, Archor, Zink flake, Oxinate Sign Date 1/25/2012 1/25/2012
Qty.
2 no.
Drawn
DRP
Ckd&Apd NCN
SHEET 8 OF 14
Drg no:K237-03-D9-28
88 8
80
C
62
2x
thru
68 43 7
E
45.5
R5 (typ.) 43 2x 5 15 M6x1.0 - 6H 12
When Tolerance not specified OVER UPTO 3 10 18 30 3 10 18 30 50 TOL. OVER UPTO 0.05 0.05 0.05 0.075 0.10 50 80 120 250 375 80 120 250 375 500 TOL. 0.10 ANGLE 30' 0.15 0.20 0.25 0.30
When Tolerance not specified for Hole Positions, Consider +/- 0.1
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
KRISAM Automation
Drg no: Desc:
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation. Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
coated, Blackened, Archor, Zink flake, Oxinate Sign Date 1/25/2012 1/25/2012
Qty.
2 no.
Drawn
DRP
Ckd&Apd NCN
SHEET 9 OF 14
Drg no:K237-01-D1-18
88 8
C
2x
thru
R6 (typ.)
30
D
15 21.5 66.5
When Tolerance not specified for Hole Positions, Consider +/- 0.1
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
When Tolerance not specified OVER UPTO 3 10 18 30 3 10 18 30 50 TOL. OVER UPTO 0.05 0.05 0.05 0.075 0.10 50 80 120 250 375 80 120 250 375 500 TOL. 0.10 ANGLE 30' 0.15 0.20 0.25 0.30
KRISAM Automation
Drg no: Desc:
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation. Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
coated, Blackened, Archor, Zink flake, Oxinate Sign Date 1/25/2012 1/25/2012
Qty.
2 no.
Drawn
DRP
Ckd&Apd NCN
SHEET 10OF 14
QTY. 1 1
Drgno:K237-01-D16
When Tolerance not specified for Hole Positions, Consider +/- 0.1 All dimensions are in mm
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
Material
3 10 18 30 50
ANGLE 30'
3 10 18 30
Treatment Finish
---
KRISAM Automation
Drg no: Desc:
Qty.
no.
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation.
Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
1 3
QTY. 1 1 4
DrgnoK237-03-D17
When Tolerance not specified for Hole Positions, Consider +/- 0.1 All dimensions are in mm
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
Material
3 10 18 30 50
ANGLE 30'
3 10 18 30
Treatment Finish
---
KRISAM Automation
Drg no: Desc:
Qty.
1 no.
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation.
Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
QTY. 1 1
DrgnoK237-01-D19
When Tolerance not specified for Hole Positions, Consider +/- 0.1 All dimensions are in mm
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
Material
3 10 18 30 50
ANGLE 30'
3 10 18 30
Treatment Finish
---
KRISAM Automation
Drg no: Desc:
Qty.
1 no.
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation.
Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.
1
B B
ITEM NO.
3
D
QTY. 1 1 2 4
D
1 2 3 4
DrgnoK237-03-D18
When Tolerance not specified for Hole Positions, Consider +/- 0.1 All dimensions are in mm
Layer Thickness
EN plating Flash chrome plating Archor 15 microns 20 microns 04 microns
Material
3 10 18 30 50
ANGLE 30'
3 10 18 30
Treatment Finish
---
KRISAM Automation
Drg no: Desc:
Qty.
1 no.
PROPRIETARY AND CONFIDENTIAL The information contained in this drawing is the sole property of KRISAM Automation.
Any reproduction in part or as a whole without the written permission of KRISAM Automation is prohibited.