Académique Documents
Professionnel Documents
Culture Documents
CableMaster
Description
Ramset Cablemaster is the fastest method of mechanical and electrical installation. using patented gas technology, designed with a number of new features allowing quicker, safer installation with greater user comfort and the lowest total installed cost.
Specifications
Weight Height Length Magazine Capacity 3.7kg 295mm 383mm 20 (+3) pin magazine, [40 (+3) pin magazine accessory] 82J 5kg 4mm 2 pins per second 650 pins (approx) 1,000 pins (approx) 6V 600mA 1 hour Automatic -5C to 49C
Impact Force Actuation Pressure Overdrive Intermittent Operation Fuel Cell Life Battery Charge Capacity Battery Voltage Battery Amperage Battery Charge time Power Regulation Operating Temperature Range Substrates Concrete, Composite Steel Decking, Solid Brick, Precast Concrete, Steel Pre-stressed Concrete, Hollow Block Wall, Reinforced Concrete, Reinforced Prefabricated Concrete
Related Products
Drive Pins & Fuel Cells Contractor Packs
Cordless - self powered, no setting up time required Sequential actuation - safe operation Powerful motor (82J) much faster than the traditional drill and anchor method lock-out feature (safety) Fastener guide designed for mechanical and electrical contract work 5kg actuation force Soft cushioned grip Voltage indicator light Well balanced Compact carrying case In-car charger adaptor (accessory) Heat sensor controls amount of gas injected, relative to the ambient temperature Electronically controlled fuel injection low maintenance. Designed to work in all Australian conditions
12
www.ramset.com.au
CableMaster
Always read and understand the instruction manual before attempting to operate a Ramset Gas Technology Tool. 1. First insert the fuel cell and battery into the tool. 2. Insert the collated fasteners into the magazine. 3. The clip should then be placed on the end of the fastener guide without compressing the front end of the tool. 4. The tool should then be compressed against the work surface. (making sure that the tool is perpendicular to the work surface). 5. Once the tool is compressed the trigger can be actuated and the fastener is driven into the substrate securing the clip in place.
CableMaster
Part No CABlEmASTER Description Cablemaster Pulsa Tool + 2 x Batteries Order Qty 1
Kit includes: Cablemaster Pulsa tool, high impact carry case, 2 x batteries, battery charger, safety glasses, allen key, dust cover, saddle adaptor and instruction manual
Accessories
Part No 336800 010670 PulSAlIFT PA1613 TmBP 900507 TmBC TmBCPS B20544l CSA2025 Description Cablemaster Fastener Guide 40 Pin magazine Pole Tool (2.4m to 3.8m working height) Safety Glasses Battery In-car Charger Replacement Charger AC / DC Adaptor Gas Tool Degreaser and lubricant Saddle Adaptor 20/25mm Order Qty 1 1 1 1 1 1 1 1 1 1
www.ramset.com.au
13
CableMaster
Consumables
Heavy Duty Pin Range for Steel and Hard Concrete Fixing
Drive Pins designed for fastening to standard strength concrete, masonry and steel.
Specifications
Raw Material Corrosion Protection Nominal Head Diameter Nominal Shank Diameter Shear Strength Tensile Strength Hardness Carbon Steel Zinc Electroplated (Minimum coating 5m) 6.3mm 2.6mm (C620 Stepped shank 2.6/2.2mm) 1120n/mm2 1800n/mm2 52-56HRC
Description Heavy Duty Steel/Concrete Heavy Duty Steel/Concrete Premium Hard Concrete/Steel Premium Hard Concrete/Steel
10 strip collation (suitable for use in 20 and 40 pin magazines) + 1 x Fuel Cell
Soft Washered Pin Range for Steel and Hard Concrete Fixing
The Soft Washered pin range is designed for use with pre-drilled PVC fittings where the pre-drilled hole size is between 3.0 to 8.0mm in diameter. These pins are used to securely fasten a variety of PVC fittings to concrete. They are used in a single shot format and are not suitable for use with a magazine.
Specifications
Raw Material Corrosion Protection Nominal Head Diameter Nominal Shank Diameter Shear Strength Tensile Strength Hardness Nominal Washer Diameter Carbon Steel Zinc Electroplated (Minimum coating 5m) 6.3mm 2.6mm 1120n/mm2 1800n/mm2 52-56HRC 11.0mm
Description Soft Washered Pin Soft Washered Pin Soft Washered Pin Soft Washered Pin
14
www.ramset.com.au
CableMaster
Consumable Selection Guide
Application Type Small Diameter Rigid Pipes
Flexible/Plastic Pipe
Metal/Nylon Straps
Electrical Conduit
Catenary Wire
Cable Fixing
Metal Pipes
CableMaster Consumables
ClipElec
4 4 4
CTClip
4 4 4
EClip
4 4
FP FireFix Clip
4 4
Combination Clip
4 4 4
4 Recommended
Ramset recommends application test on-site before commencing use.
www.ramset.com.au
15