Académique Documents
Professionnel Documents
Culture Documents
RETAIL CATALOG
PHONE: 541-923-1290 FAX: 541-923-5637 ORDERS: 1-800-POWROLL ADDRESS: SHIP: 13840 Commercial LP Crooked River OR 97760 MAIL: PO Box 920 Redmond OR 97756 WEBSITE: www.powroll.com EMAIL: mail@powroll.com HOURS: 8am - 5:30pm M-Th, 8am Noon Friday
POWROLL PRODUCT INFORMATION Descriptions and Denitions of terms we use to describe our products & services. BILLET PISTON KITS
PISTON KIT - STANDARD HI COMP
Machine work and installation not included in price.
P O W R O L L M OTO R P E R F O R M A N C E
PG 2
Made from new material. There is no core required for a Billet cam.
Stock sized piston w/ taller dome, will increase compression but not displacement. REQUIREMENTS: Installs in place of your stock piston. No boring required, clearances should be checked. This kit includes a piston that is larger than stock size that will bore into the stock cylinder sleeve. REQUIREMENTS: Stock cylinder will need to be bored to t the Powroll piston. Piston size is larger than acceptable limits for stock sleeve. A larger sleeve is included with these kits. REQUIREMENTS: Stock cylinder will need the sleeve removed, the cylinder bored to t the Powroll sleeve, and the Powroll sleeve bored to t the Powroll piston. These kits require a sleeve (see PISTON KIT - RE-SLEEVE above), but the new sleeve is larger than the hole in the cases. REQUIREMENTS: The same procedure as PISTON KIT - RE-SLEEVE above, plus the cases split, then bored to accept the larger sleeve. Call for price and availablilty.
A hardweld cam is made by adding material to a good stock camshaft. Hardweld Camshaft prices will be listed like this: $175.00 on your good core (#12761), or $255 outright (#1276122761G) The rst price is the cost of hardwelding the cam, this is the price if you send in a good core. The second price (outright) is the cost of hardweld work and a new stock camshaft. You will pay this if you do not send a good core. SENDING A CORE? Work will be done on your stock core. Turn around approximately 3 weeks. NOT SENDING IN A CORE? The price you pay will be the outright price listed. . Same as above, but no core charge. Do not return your core for credit. Cores for hardweld must meet Powrolls standards, and include all pressed-on parts. ROCKER CORES: Damage to the shaft area is not acceptable. CAM CORES: Scoring on the lobes is acceptable. Journal area damage, or damage to the timing sprocket holder is not acceptable. If bearings were included on the Powroll cam, your core must also have the same bearings for complete credit. A copy of the original invoice must accompany all core returns, if no copy is available, send your name and phone number from your original order. Call before sending a damaged core. Some items are listed as special order, these require additional lead time, a minimum of 3 weeks, sometimes longer. Prepayment may be required.
SPECIAL ORDER
STROKE
BORE & STROKE COMBINATION STROKE W/ ROD ASSY STROKE W/ TOUGH ROD ASSY
This price includes the work done on your crank, a new stock rod or stronger Tough Rod, pin and needle bearing. If other parts (cam sprocket, main bearings, etc) are needed, these will be extra. This is the stroke work with a stronger rod. Pin, needle bearing and other parts are not included in this price.
Because we cannot control application or maintenance, the products in this catalog are sold without any express or implied warranty of merchantability or tness for a particular purpose. POWROLL shall not under any circumstances be liable for any special, consequential, or incidental damages -- including but not limited to; bodily injury, loss of prots or revenue, loss of other property or equipment, costs of purchased or replacement goods or claims of customers of the purchaser, which may arise and/or result from the sale, installation, or use of these parts. Products in this catalog are designed for closed course racing applications only. Powroll Inc. reserves the right to refuse service, products and/or information to anyone. *Subject to applicable state law. USE OF THESE PRODUCTS MAY VOID ORIGINAL MANUFACTURERS WARRANTY ON YOUR BIKE. Prices, Specs & Availability Subject to Change Without Notice
PG 3
HONDA MOTORCYCLES
THESE ITEMS FIT ALL OHC 50s & 70s CAMCHAIN - POWROLL HEAVY DUTY $20.00 #18540 Stronger and less expensive than the OEM Honda chain. VENTED VALVE CAP $45.00 #18530 Choose Gold, Blue, Red or Silver. CLUTCH SPANNER SOCKET $9.95 #18541
PISTON KIT - STANDARD 39mm HI COMP 13:1 Compression $140.00 #00325F 15:1 Compression $150.00 #00360 PISTON KIT - BORE-IN 82CC $165.00 #00334 50mm piston, 13:1 compression.
INCLUDES: P ridden at or near sea level may run better with a mix of 1/2 race gas and 1/2 pump.
TIONS: Bikes
STROKE W/ TOUGH ROD ASSEMBLY +9.5mm $375.00 #16087RA 100ccs with 50mm piston. CAMSHAFT - BILLET - RACE GRIND $150.00 #12755B CARB - 19mm KEIHIN $270.00 #20537
INCLUDES: Powroll Tough Rod Assembly: Rod, pin, needles. Work done on your crank. REQUIRES: Send crank for work, see pg 2. RECOMMENDATIONS: Works best with Powroll pistons. Modications may be required if using other brands. Lift .266 IN/.266 EX. Duration 210 IN/206 EX @.050 Uses stock bearings - not included. KIT INCLUDES: Pre-Jetted Carb, Throttle Assembly (ts 7/8 bars), Special Hi-Velocity polished aluminum manifold, 3 Extra Main Jets, Intake Gasket, Mounting Hardware, K&N Filter, Installation and Jetting instructions. RECOMMENDATIONS: Works best on engines 82cc and larger.
EXHAUST THRUST CHAMBER - Spark Arrested $45.00 #17102 Works with stock spark arrestor. Choose Gold, Silver or Red. THRUST NOZZLE - Not Spark Arrested $45.00 #17102N Replaces the stock spark Arrestor unit. CLUTCH - TITANIUM CLUTCH WEIGHTS STARTER PACK - 4 Weights $15.00 #16852 SUPER PRO PACK - 16 Weights $50.00 #16853
Can be installed in groups from 4-16. The more ti weights you run, the higher the engagement rpm. INCLUDES: Starter Pack = 4 weights. Super Pro Pack = 24 Weights. Detailed installation instructions.
I RECOMMENDATIONS: Bikes ridden at or near sea level may run better with a mix of 1/2 race gas and 1/2 pump. INCLUDES: Powroll Tough Rod Assembly: Rod, pin, needles. Work done on your crank. REQUIRES: Send crank for work, see pg 2. RECOMMENDATIONS: Works best with Powroll pistons. Modications may be required if using other pistons or cams.
CAMSHAFT - BILLET - RACE GRIND $140.00 #12755B Lift .266 IN/.266 EX. Dur. 210 IN/206 EX @.050
BORE & STROKE COMBINATION 100cc $550.00 #00006R-16000RA 50mm Bore, 9.5mm Stroke 11:1 Compression PISTON KIT - OVERSIZE FOR 100cc $175.00 #00006RA 50.25mm piston, 11:1 compression
INCLUDES: Stroker with Rod Assembly: Powroll Tough Rod Assembly: Rod, pin, needles. Work done on your crank. Piston Kit: Piston, pin, rings, clips, headgasket, + .010 Oversize for 100cc kit shown above. INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring.
PISTON KIT - OVERSIZE FOR 80cc KIT $160.00 #00005NB 50mm Piston, 8:1 Comp BORE & STROKE COMBINATION 100cc $550.00 #00006R-16000RA 50mm Bore, 9.5mm Stroke 11:1 Compression PISTON KIT - OVERSIZE FOR 100cc KIT $175.00 #00006RA 50.25mm piston, 11:1 compression CAMSHAFT - HARDWELD, NO CORE REQD - MID-TOP END GRIND $195.00 #12601N
Lift .238 IN/EX. Hardweld cam on a new stock core. No core exchange required. INCLUDES: Stroker with Rod Assembly: Powroll Tough Rod Assembly: Rod, pin, needles. Work done on your crank. Piston Kit: Piston, pin, rings, clips, hea + .010 Oversize for 100cc kit shown above. INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring
HONDA MOTORCYCLES
PISTON KIT - BORE-IN 80CC $165.00 #00320 49.5mm piston, 11:1 compression.
+.020
PG 4
PISTON KIT - OVERSIZE FOR 80cc KIT $165.00 #00320B 50mm piston, 11:1 compression
INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket.REQUIRES: Boring, rejetting. RECOMMENDATIONS: 98+ Octane.
STROKE W/ TOUGH ROD ASSY 9.5mm $375.00 #16050RA 100ccs with 49.5mm Piston.
INCLUDES: Powroll Tough Rod Assembly: Rod, pin, needles. Work done on your crank. REQUIRES: Send crank for work, read pg 2. RECOMMENDATIONS: Works best with Powroll pistons. Modications may be reqd w/ other piston or cam brands. Uses stock bearings - not included.
CAMSHAFT - BILLET - RACE GRIND $150.00 Cam #12746B Lift .266 IN/.266 EX. Duration 210 IN/206 EX @.050 CARB - 19mm KEIHIN $270.00 #20538
INCLUDES: Pre-Jetted Carb. Throttle Assembly (ts 7/8 bars). Special Hi-Velocity polished aluminum manifold. 3 Extra Main Jets. Intake Gasket. Mounting Hardware. K&N Filter. RECOMMENDATIONS: Works best on engines with at least a Powroll high compression piston and cam.
EXHAUST THRUST CHAMBER - Spark Arrested $45.00 #17102 Works with stock spark arrestor. Choose Gold, Silver or Red. THRUST NOZZLE - Not Spark Arrested $45.00 #17102N Replaces the stock spark Arrestor unit. CLUTCH - TITANIUM CLUTCH WEIGHTS STARTER PACK - 4 Weights $20.00 #16852 SUPER PRO PACK - 24 Weights $75.00 #16854
Can be installed in groups from 4-16. The more ti weights you run, the higher the engagement rpm. INCLUDES: Starter Pack = 4 weights. Super Pro Pack = 24 Weights. Detailed installation instructions.
STROKE W/ TOUGH ROD ASSEMBLY 9.5mm $375.00 #16050RA 100ccs with 49.5mm Piston.
CAMSHAFT - BILLET - RACE GRIND $150.00 Cam #12746B Lift .266 IN/.266 EX. Duration 210 IN/206 EX @.050
STROKE W/ TOUGH ROD ASSEMBLY 9.5mm $375.00 #16050RA 98ccs with 49.5mm Piston.
PISTON KIT - OVERSIZE FOR 82CC KIT $175.00 #00006RA 50.25mm piston, 11:1 compression
INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring, rejetting.
STROKE W/ TOUGH ROD ASSEMBLY 9.5mm $375.00 #16000RA 100ccs with 50mm Piston.
INCLUDES: Powroll Tough Rod Assembly: Rod, pin, needles. Work done on your crank. REQUIRES: Send crank for work, see pg 2. RECOMMENDATIONS: Works best with Powroll pistons. Modications may be required if using other piston or cam brands.
CAMSHAFT - HARDWELD, NO CORE REQD - MIDRANGE GRIND $195.00 #12601N Lift .238 IN/EX
PISTON KIT - BORE-IN 82CC $175.00 #00006R 50mm piston, 11:1 compression. PISTON KIT - OVERSIZE FOR 82CC $175.00 #00006RA 50.25mm piston, 11:1 compression STROKE W/ TOUGH ROD ASSEMBLY 9.5mm $375.00 #16000RA 100ccs with 50mm Piston.
INCLUDES: New Tough Rod, pin, needle assembly. Work done on your crank. REQUIRES: Send crank for work, see pg 2.
CAMSHAFT - HARDWELD, NO CORE REQD - MIDRANGE GRIND $195.00 #12601N Lift .238 IN/EX
PISTON KIT - BORE-IN 80CC $160.00 #00147N 49.5mm piston, 9.5:1 compression. PISTON KIT - OVERSIZE FOR 80CC $160.00 #00147NB 50mm piston, 9.5:1 compression. STROKE 9.5mm $275.00 #16029 98ccs with 50mm piston.
INCLUDES: Work done on your crank. No parts included. Your crank may require additional parts. REQUIRES: Send crank for work, read pg 2.
CAMSHAFT - HARDWELD, NO CORE REQD - MID-TOP GRIND $195.00 #12601N Lift .238 IN/EX VALVE SPRINGS $50.00 #24001 These utilize your stock retainers and work well with most aftermarket cams. CLUTCH SPRINGS $21.00 #16785
PG 5
HONDA MOTORCYCLES
PISTON KIT - OVERSIZE FOR 80cc KIT $160.00 #00036NB 50mm piston, 9.5:1 compression. STROKE 9.5mm $275.00 #16015 98cc with 50mm piston.
INCLUDES: Work done on your crank. No parts included. Your crank may require additional parts. REQUIRES: Send crank for work, see pg 2. RECOMMENDATIONS: Works best with Powroll pistons. Modications may be required if using other piston or cam brands.
EXHAUST - POWROLL PERFORMANCE $250.00 #18336 Powroll oversize header and 3 Supertrapp, Spark Arrested.
PISTON KIT - BORE-IN 95cc 51.25mm piston, 10.5:1 compression $150.00 1992-CURRENT #00315N, 1979-1991 #00342
INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring, rejetting. INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring, rejetting.
PISTON KIT - OVERSIZE FOR 95cc KIT 51.5mm piston, 10.5:1 compression $150.00 1992-CURRENT #00315NB, 1979-1991 #00342B BORE & STROKE COMBINATION 121cc 53mm Bore, 9mm Stroke, 11:1 Compression. $645.00 1992-CURRENT #00260S-16037-14RA, 1979-1991 #00259S-16037-14RA
INCLUDES: BORE: Piston, rings, pin, circlips, headgasket, basegasket, sleeve STROKE: Work done on your crank. Includes Rod Assembly, crank may require additional parts. REQUIRES: Boring, Re-sleeving, Case machining. Send crank for work, see pg 2. Best with 95cc and larger engines. Valve springs strongly recommended.
CAMSHAFT - HARDWELD, NO CORE REQD - RACE GRIND $195.00 #12680N Lift .280 IN/ .275 EX. VALVE SPRINGS $50.00 #24001 These utilize your stock retainers and work well with most aftermarket cams. CLUTCH SPRINGS 1987-Current #16751 $25.00, 1979-1986 #16785 $21.00 EXHAUST - 2001 & later Models THRUST CHAMBER - Spark Arrested $45.00 #17102 Works with stock spark arrestor. Choose Gold, Silver or Red. THRUST NOZZLE - Not Spark Arrested $45.00 #17102N Replaces the stock spark Arrestor unit. EXHAUST - 1985-2000 Models - POWROLL PERFORMANCE SYSTEM $250.00 #18294 Powroll header w/ 3 Supertrapp. Spark Arrested.
PISTON KIT - BORE-IN 104cc $235.00 #00344 54mm Piston, 10.5:1 Compression.
INCLUDES: Piston, pin, rings, circlips, headgasket (specify round or notched gasket). REQUIRES: Boring, rejetting.
STROKE - CT90 ONLY #16003 $275.00 8.4mm Stroke 124ccs,11.5:1 Compression with 54mm Piston
FITS* A,B: PISTON KIT FOR 100 - BORE-IN 118cc - 55mm Piston High Compression 13.5:1 #00361 $290.00 Low Compression 9.5:1 #00361LC $290.00
INCLUDES: Sle
10+ Octane.
FITS* = C, D, E, F (A, B - ONLY with Stroker kit listed below): PISTON KIT - RE-SLEEVE 145cc - 61mm Piston High Compression 11:1 #00019HC $330.00 Low Compression 9.5:1 #00019F $330.00 FITS* = C, D, E, F (A, B - ONLY with 145cc kit above, or stock 125 piston): STROKE +9.5mm with Heavy Duty Rod Assembly (15mm Piston Pin) 59.4mm Total Stroke. 100 Crank #16010RA $425.00 125 Crank #16005RA $425.00
INCLUDES: Sleeve, forged piston, 15mm pin, rings, circlips, headgasket. REQUIRES: Re-sleeving cylinder. Case machining w/ 100 cases, rejetting, 11:1 use 100+ octane fuel.
INCLUDES: New rod (15mm piston pin size), crank pin and big-end bearing. Stroke work done on your stock crank assembly. REQ: Send crank for work, see pg 2.
FITS* = A, B: RACE CAM GRIND FOR 100 - $140.00 #12769 Lift .239 IN/ .237 EX.
Hardweld, done on your good core. Valve spring kit strongly recommended. Hardweld, done on your good core. Valve spring kit strongly recommended.
FITS* = C,D: RACE CAM GRIND FOR 125 - $140.00 #12614 Lift .320 IN/ EX. FITS* = ALL (also XL/XR 200 (two valve), and ATC 200x): CAM SPROCKET - ADJUSTABLE #23205 $50.00
Re-degree any cam, index holes will give up to approximately 6 degrees advance and 6 degrees retard.
FITS* = A, B, C, D: VALVE SPRINGS $50.00 #24040 These utilize your stock retainers and work well with most aftermarket cams. FITS* = A, C, D: CLUTCH SPRINGS #16775 $29.00 FITS* = A, B, C, D, E, F: JET KIT #21352 $35.00
Also ts all Honda carburetors using main jets with the starting digits of 99114-246-****. Kit includes: Jetting instructions, one each: 85, 95, 100, 105, 110, 115, 120, 125, 130, 135 Genuine Keihin Main Jets.
HONDA MOTORCYCLES
HONDA CRF100 - XR100 - ALL YEARS
PISTON KIT - BORE-IN 110CC $call 55mm Piston, 11:1 or 13:1 Compression 1992 - Current Models #00332F 1979 - 1991 Models #00333F
INCLUDES: Forged piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring, rejetting, 13:1 = 102+ octane.
PG 6
PISTON KIT - RE-SLEEVE (Case Mach Reqd) 120CC $215.00 - 58mm Piston, 11.5:1 Compression 1992 - Current Models #00309F 1979-1991 Models #00307F
INCL
PISTON KIT - RE-SLEEVE (Case Mach Reqd) 120cc ~SPECIAL~ HIGHER COMP $285.00 - 58mm Piston, 12:1 Compression 1992 - Current Models #00309 - Special Order 1979 - 1991 Models #00307 - Special Order
INCLUD
STROKE - 6.0mm $260.00 #16041 Total displacement is 135cc when used with our 120cc Bore Kit.
Price includes work only, parts (if needed) are extra. REQUIRES: Send crank for work, see pg 2. 58mm piston kits must use Powroll sleeve. Price includes work only, parts (if needed) are extra. REQUIRES: Send crank for work, see pg 2. 58mm piston kits should use Powroll sleeve. Hardweld, no core required. Valve spring kit strongly recommended.
STROKE - 9.0mm STROKE $275.00 #16090 Total displacement is 150cc when used with our 120cc Bore Kit.
CAMSHAFT - HARDWELD, NO CORE REQD - RACE GRIND $195.00 #12680N Lift .280 IN/ .275 EX. VALVE SPRINGS $50.00 #24001 These utilize your stock retainers and work well with most aftermarket cams. CLUTCH SPRINGS 1987-Current #16751 $25.00 1979-1986 #16785 $21.00 EXHAUST - 2001 & later Models THRUST CHAMBER - Spark Arrested $45.00 #17102 Works with stock spark arrestor. Choose Gold, Silver or Red. THRUST NOZZLE - Not Spark Arrested $45.00 #17102N Replaces the stock spark Arrestor unit. EXHAUST - 1985-2000 Models - POWROLL PERFORMANCE SYSTEM $250.00 #18294 Powroll header w/ 3 Supertrapp. Spark Arrested.
EXHAUST - THRUST CHAMBER - Spark Arrested $55.00 #17105 - Works with stock spark arrestor. Choose Gold, Silver or Red. PISTON KIT - STANDARD HI COMP $219.00 #00339 63.5mm Piston 12.5:1 Compression.
Uses stock rings, pin and gaskets. INCLUDES: Piston, circlips REQUIRES: Rejetting. Race Gas Mix 100 octane+
CRF 150 OEM Parts Kit $65.00 #00339K INCLUDES: stock Honda rings, pin, headgasket and basegasket. PISTON KIT - BORE-IN 170cc $230.00 #00336 66mm Piston, 11:1 Compression.
INCLUDES: Piston, pin, rings, clips, headgasket and basegasket REQUIRES: Cylinder Boring, rejetting.
STROKE W/ TOUGH ROD ASSY 4.0mm $375.00 #16080RA 53.5mm total stroke. 170cc with stock piston, 190ccs with 66mm piston STROKE W/ TOUGH ROD ASSY 9.5mm $425.00 #16079RA 59mm total stroke. 187cc with stock piston, 202cc with 66mm piston. CARB - 26mm MIKUNI $300.00 #20535
Uses stock springs
INCLUDES: New rod assy. Work done on your crank. REQ: See Pg 2 for info on shipping cranks. Modications may be reqd if using other piston or cam brands. INCLUDES: New rod assy. Work done on your crank. REQ: See Pg 2 for info on shipping cranks. Modications may be reqd if using other piston or cam brands INCLUDES: Pre-jetted carburetor with Billet ange and spigot. Throttle Cable. Mounting Hardware. Main jet assortment. Detailed installation instructions.
CAMSHAFT - HARDWELD - MID-TOP END GRIND $165.00 + Core Charge $75.00 Cam #12756 Core #22756G EXHAUST POWROLL OVERSIZE HEADER $100.00 #18351H
THRUST CHAMBER - Spark Arrested $55.00 #17105 Works with stock spark arrestor. Choose Gold, Silver or Red. THRUST NOZZLE - Not Spark Arrested $55.00 #17105N Replaces the stock spark Arrestor unit.
Use with stock unmodied mufer, with the Thrust Chamber for more power, and the Thrust Nozzle for the best horsepower.
PISTON KIT - BORE-IN 190cc $399.00 #00348 Special Order 53.9mm Piston, 12.75:1 Compression.
ed.
INCLUDES: Piston, pin, rings, circlips, head gasket and base gasket REQUIRES: Boring, rejetting. High Comp = 105+ octane.
CAMSHAFT - BILLET W/ NEEDLE BEARING - TORQUE GRIND $280.00 #12701N Lift .365 IN/EX
CAMSHAFT - HARDWELD, NO CORE REQD - MID-TOP END GRIND $195.00 #12714N Lift .355 IN/EX. Req: #24012T Springs, 11:1+ Comp. CAMSHAFT - HARDWELD, NO CORE REQD - RACE GRIND $195.00 #12719N Lift .395 IN/EX. Req: #24012T Springs, 11:1+ Comp. VALVE SPRINGS WITH TITANIUM RETAINERS $100.00 #24012T CAM CHAIN - HIGH STRENGTH $30.00 #18526 CAM SPROCKET - ADJUSTABLE #23205 $50.00 Re-degree any cam, index holes will give up to approximately 6 degrees advance and 6 degrees retard.
PG 7
HONDA MOTORCYCLES
CAMSHAFT - HARDWELD - MID-TOP END GRIND $165.00 + Core Charge $75.00 Cam #12756 Core #22756G EXHAUST POWROLL OVERSIZE HEADER $100.00 #18353H
THRUST CHAMBER - Spark Arrested $55.00 #17105 Works with stock spark arrestor. Choose Gold, Silver or Red. THRUST NOZZLE - Not Spark Arrested $55.00 #17105N Replaces the stock spark Arrestor unit.
Use with stock unmodied mufer, with the Thrust Chamber for more power, and the Thrust Nozzle for the best horsepower.
PISTON KIT - BORE-IN 277cc $225.00 #00288 77mm Forged Piston, 10.5:1 Compression. STROKE 3.1mm $290.00 #16096 291cc with 77mm piston.
INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Cylinder Boring, rejetting. INCLUDES: Work done on your crank. See Pg 2 for details. RECOMMENDATIONS: Works best with Powroll pistons. Modications may be required if using other piston or cam brands.
PISTON KIT - BORE-IN 415cc $230.00 #00308 87mm forged piston, 10.8:1 compression.
INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring, rejetting.
PISTON KIT - RE-SLEEVE 440cc $315.00 #00314HC 89mm Forged Piston, 11.2:1 Compression
INCLUDES: P
INCLUDES: Sleeve, piston, pin, rings, circlips, headgasket, basegasket REQUIRES: Re-sleeving of your cylinder, rejetting
PISTON KIT - OVERSIZE FOR 89mm KIT $225.00 #00314HC-B 89.5mm Forged Piston, 11.2:1 Compression BORE & STROKE COMBO 440cc $522.00 #00302S-16094LR 87mm Bore, +4mm Stroke, 11:1 Compression.
INCLUDES: 87mm PISTON KIT - BORE-IN Piston Kit: Piston, pin, rings, circlips, headgasket, basegasket. 4.0mm Stroke. Work done on your crank. REQUIRES: Cylinder boring. Rejetting. Send crank for work, see pg 2. Intake Valve #24514A - 1mm Oversize Intake Valve #24514 - Standard Size Exhaust Valve #24515 - Standard Size Exhaust Valve #24515A - 1mm Oversize
VALVES - STAINLESS STEEL $55.00 Each - Special Order Purchase 2 Intake valves and 2 Exhaust valves for a complete set of 4.
www.powroll.com
HONDA ATVs
PG 8
PISTON KIT - OVERSIZE FOR 95cc KIT $165.00 #00299B 50mm piston, 9.5:1 compression. PISTON KIT - RE-SLEEVE (Case Mach Reqd) 111CC $279.00 #00345 53.5mm piston, 11:1 compression. PISTON KIT - OVERSIZE FOR 111cc KIT $185.00 #00345B 54mm piston, 11:1 compression.
INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring of Powroll sleeve. INCLUDES: Piston, pin, rings, circlips, head & base gasket, sleeve. REQUIRES: Re-sleeving, Boring, Case Machining, rejetting.
STROKE W/ TOUGH ROD ASSY 4.5mm $375.00 #16095RA 104ccs w/49.5mm Piston, 122cc w/53.5mm Piston. 54mm total stroke.
INCLUDES: New Rod, pin, needle assembly. Work done on your crank. REQUIRES: Send crank for work, see pg 2. be required if using other piston/cam brands.
CAMSHAFT - HARDWELD - RACE GRIND $210.00 + Core Charge $100.00 Cam #12740 Core #22740G
Lift .239 IN / .243 EX Works with stock springs and retainers. REQUIRES: Core Exchange or Core Charge (see PG 2).
VENTED VALVE CAP $45.00 #18530 Choose Red, Gold or Silver. JET KIT - 2006 & LATER MODELS $19.00 #21351 INCLUDES: Needle shim, main jet sizes 92, 95 & 98. Jetting instructions. CLUTCH SPRINGS $25.00 #16781 CLUTCH SHOES - LIGHTENED $84.00 #16855 EXHAUST - 2006 & LATER - POWROLL PERFORMANCE SYSTEM $260.00 #18354 EXHAUST - 1993-2005 - POWROLL PERFORMANCE SYSTEM $250.00 #18333 CAM CHAIN - HIGH STRENGTH $35.00 #18528
Includes Powroll header and Tuneable spark arrestor, installation & jetting instructions. Includes Powroll header, Supertrapp mufer, jet kit # 21351 w/ installation instructions.
PERFORMANCE KIT $345.00 #00327 70.5mm BORE, Stock STROKE, 10.8:1 COMPRESSION 229cc stock. 249cc with this kit. VENTED VALVE CAP $45.00 #18530 Installs in place of your exhaust valve cap. Choose Red, Gold or Silver
PISTON KIT - STANDARD HI COMP 74mm $139.00 #00359 Std bore 74mm Forged Piston, 11:1 Compression (11.5:1 w/ Stroke). PISTON KIT - RE-SLEEVE 78mm $325.00 #00271 78mm Forged Piston, Choose 10.5:1, 11.5:1 or 13:1 Compression.
313ccs for the 300EX, 274ccs for the 250X. INCLUDES: Sleeve, piston, pin, rings, circlips, headgasket. REQUIRES: Resleeving of your stock cylinder. Rejetting. RECOMMENDATIONS: Compression ratios 11:1 and higher requires fuel 110 octane or greater. 300EX starter may not work with compression ratios over 11.5:1. 329ccs for the 300EX, 288ccs for the 250X. INCLUDES: Sleeve, piston, pin, rings, circlips, headgasket REQUIRES: Resleeving of your stock cylinder. Case machining to accept larger sleeve. Rejetting. INCLUDES: Work done on your crank. Parts, if needed, will be extra. REQUIRES: Send crank for work, see pg 2. Works best with Powroll pistons. Mods may be required with other piston or cam brands. INCLUDES: Work done on your crank. Parts, if needed, will be extra. REQUIRES: Send crank for work, see pg 2. RECOMMENDATIONS: Works best with Powroll pistons. Mods may be required if using other piston or cam brands. Lift .304 Intake, .304 Exhaust. REQUIRES: Core Exchange or Core Charge (see PG 2). Lift .336 Intake, .336 Exhaust. REQUIRES: Valve Springs #24029
PISTON KIT - RE-SLEEVE (Case Mach Reqd) 80mm $325.00 #00298 80mm Forged Piston, 10.5:1 Compression. STROKE 300EX 4mm (Total stroke 69.5mm) $290.00 #16054 Displacement: 74mm Piston = 299cc. 78mm Piston = 333cc. 80mm piston = 349.4cc STROKE 250X 12.2mm (Total stroke 69.5mm) $315.00 #16053 Displacement: 74mm Piston = 299cc. 78mm Piston = 333cc. 80mm piston = 349.4cc
CAMSHAFT - HARDWELD - TORQUE GRIND $150.00+Core Charge $100.00 Cam #12741 Core #22733G CAMSHAFT - HARDWELD - MID-TOP END GRIND $195.00+Core Charge $100.00 Cam #12733HW Core #22733G HARDFACE STOCK ROCKERS $130.00/SET - Done on your stock rockers #23004 x 2 Send in your rockers, average turn-around 4 wks. VALVE SPRINGS WITH TITANIUM RETAINERS $130.00 #24029 INCLUDES: Inner and outer springs, titanium retainers, shims. CARB - 32mm MIKUNI ROUND SLIDE $280.00 #20526
Pre-jetted for our 352cc kit. INCLUDES: Pre-jetted carb, extra jets, twist throttle.
KIT INCLUDES: Engine Mount Spacers, Install Instructions, Wiring Inst. Complete EXHAUST - POWROLL PERFORMANCE system - oversize header, Meg, Supertrapp 4 Racing Mufer (Spark Arrested) REQUIRES: 350X Engine. 250X Chassis, Carb & wiring harness. 350X CDI Box.
INSTALL A 350X ENGINE IN YOUR 250X OR 300EX CHASSIS $675.00 #18328K SAVE $20!
OR - ORDER COMPONENTS SEPARATELY: CONVERSION INSTALLATION KIT $70.00 #18514 Motor mount spacers, installation instructions, wiring & tuning inst. CONVERSION EXHAUST SYSTEM $645.00 #18328 Powroll oversize header, Megaphone, Supertrapp 4 Racing Mufer (Spark Arrested).
PG 9
HONDA ATVs
CAMSHAFT - HARDWELD, NO CORE REQD - MIDRANGE END GRIND $195.00 #12726N Lift .355 Intake, .360 Exhaust. CAMSHAFT - HARDWELD, NO CORE REQD - RACE GRIND $195.00 #12725N Lift .360 Intake, .360 Exhaust VALVE SPRINGS WITH TITANIUM RETAINERS $130.00 #24024 HARDFACE STOCK ROCKERS $130.00/SET - Done on your stock rockers #23004 x 2 Send in your rockers, average turn-around 4 wks.
PISTON KIT - RE-SLEEVE 393cc $345.00 #00254 86mm Forged Piston, 10:1 Compression.
INCLUDES: Sleeve, piston, pin, rings, circlips, headgasket. REQUIRES: Resleeving, boring, rejetting
PISTON KIT - BORE-IN 415cc $230.00 #00308 87mm forged piston, 10.8:1 compression.
INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket REQUIRES: Boring, rejetting.
PISTON KIT - RE-SLEEVE 440cc $315.00 #00314HC 89mm Forged Piston, 11.2:1 Compression
INCLUDES: Sleeve, piston, pin, rings, circlips, headgasket, basegasket REQUIRES: Re-sleeving of your cylinder, rejetting. Oversize for our 440cc bore kit listed above. INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket REQUIRES: Must use oversize sleeve provided with any aftermarket 440cc kit.
PISTON KIT - OVERSIZE FOR 89mm KIT $225.00 #00314HC-B 89.5mm Forged Piston, 11.2:1 Compression PISTON KIT - BORE-IN for 4mm Stroke $272.00 #00302S 87mm forged piston, 11:1 compression.
Made to work with any 4mm stroker that has a standard length rod - this piston is 2mm shorter from pin to top to compensate. INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket REQUIRES: +4mm stroke w/std. length rod. INCLUDES: 87mm PISTON KIT - BORE-IN Piston Kit: Piston, pin, rings, circlips, headgasket, basegasket. 4.0mm Stroke. Work done on your crank. REQUIRES: Boring. Rejetting. Send crank for work, see pg 2. INCLUDES: Stroke work done on your crank assembly. New Powroll Tough Rod. PISTON KIT IS NOT INCLUDED. REQUIRES: Send in your crank for modication, read Pg. 2 for details. Ha
BORE & STROKE COMBINATION - 440cc $522.00 #00302S-16099 87mm Bore, +4.0mm Stroke, 11:1 Comp.
STROKE W/ TOUGH ROD +4.0mm $545.00 #16092R 425cc w/ stock piston, 440cc w/ 87mm piston, 460cc w/ 89mm piston
CAMSHAFT - HARDWELD - MID-TOP END GRIND $195.00 #12745 + Core Charge $170.00 #22745G Lift .350 In and .345 Ex HARDFACED ROCKERS $280.00 (set) #23001 + CORE CHARGE $140.00 #23001G VALVE SPRINGS $120.00 #24035
INCLUDES: Stronger inner and outer springs. Titanium Retainers. Highly recommend with any aftermarket camshaft. REQUIRES: Core Exchange or Core Charge (see PG 2).
VALVES - STAINLESS STEEL $55.00 Each - SPECIAL ORDER Purchase 2 Intake Valves and 2 Exhaust Valves for a complete set of 4 INTAKE - STOCK SIZE #24514 INTAKE - 1MM OVERSIZE #24514A EXHAUST - STOCK SIZE #24515 EXHAUST - 1MM OVERSIZE #24515A CARB - 39mm KEIHIN FCR - SPECIAL POWROLL SETUP $600.00 #20530
INCLUDES: Prejetted Keihin 49mm Carb tion & jetting instruction booklet. JETTED FOR: Racing and dune engines 415cc and larger. Trail engines 440cc and larger.
CLUTCH SPRINGS $21.00 #16780 Recommended for all performance applications PERFORMANCE TIP - An unmodied XR250 CDI box will work as a performance CDI and give you about 800 more rpm on top, plus a faster ignition curve (some engines
do experience starting issues with this modication). Purchase it from your Honda dealer and save money. Order: Honda Part #30410-KCE-671.
STROKE + PISTON MODS - +2.6mm Stroke $400.00 #15903-25409 468cc with Standard 94mm Piston, 488cc with 96mm Piston
Works with the following pistons: Stock Honda 94mm Piston = 468cc (Premium Pump fuel OK) Wiseco 96mm #4848M09600 = 488cc 11.2:1 Compression (Race Gas mix 100 octane or better) Wiseco 96mm #4849M09600 = 488cc 12.5:1 Compression (Race Gas mix 108 octane or better) INCLUDES: Work done on your crank and piston. REQUIRES: Send in your crank assembly and new Honda or Wiseco piston for modication, see pg 2. RECOMMENDATIONS: For engines wi at no additional charge). Designed specically to produce the best power with our combos shown above.
PG 10
INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring, rejetting RECOMMENDATIONS: Bikes ridden at or near sea level may run better with a mix of 1/2 race gas and 1/2 premium pump fuel. INCLUDES: 61mm PISTON KIT - RE-SLEEVE (Case Mach Reqd): Forged piston, rings, pin, clips, sleeve, headgasket, basegasket. 5.9mm Stroke w/ Tough Rod Assy: Done on your 2003 & later crank assembly. New Powroll rod and crank bearing (uses stock crank pin). REQUIRES: Resleeving, case machining, boring, rejett INCLUDES: 58mm PISTON KIT - BORE-IN: Forged piston, rings, pin, clips, headgasket, basegasket. 5.9mm Stroke w/ Tough Rod Assy: Done on your 2003 & later crank assy. Powroll Tough Rod and brg (uses stock crank pin). REQUIRES: Boring, rejetting, Send crank for work, see pg 2. Uses stock springs and rockers. REQUIRES: For #12754 send good core for work.
BORE-STROKE COMBO - 165cc WITH POWROLL TOUGH ROD #00352-15904-14RA $650.00 61mm Piston, 5.9mm Stroke, 12.5:1 CR.
BORE-STROKE COMBO - 150cc WITH POWROLL TOUGH ROD #00349-14-15904-14RA $500.00 58mm Piston, 5.9mm Stroke, 12.5:1 CR. CAMSHAFT - HARDWELD - RACE GRIND - $195.00 on your good core (12754), or $295.00 outright (#12754-22754G) CARB - 22mm KEIHIN - $280.00 #20539
INCLUDES: Pre-jetted carburetor with Billet ange and spigot. Throttle Cable. Mounting Hardware. Main jet assortment. Detailed installation instructions. Uses stock throttle/cable, intake and airbox.
CLUTCH - TOUGH CLUTCH KIT #16700 $9.25 More grip and less slip for stock and modied engines. INCLUDES: 6 springs, 2 bolts. EXHAUST - POWROLL PERFORMANCE SYSTEM $250.00 #18346
INCLUDES: Powroll oversize header, Supertrapp 3 Mufer, mounting hardware. REQUIRES: Rejetting.
PISTON KIT - BORE-IN LO COMP. 143cc $160.00 #00331S 61mm Piston, 11:1 Compression.
Used alone, it will give the engine a small (10%) boost in torque and midrange power. For real performance gains, we strongly recommend kit #00331F, or the 170cc bore/stroke combo. INCLUDES: Forged piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring. Rejetting. INCLUDES: PISTON KIT - BORE-IN Piston Kit: Piston, pin, rings, clips, headgasket, basegasket. +9mm Stroke: Work done on your good stock crank assembly. REQUIRES: Boring. Send crank for work, see pg 2. Rejetting (Carb kit #20536 highly recommended).
BORE-STROKE COMBO - 170cc $420.00 #00331S-16086 61mm Piston. 9mm Stroke. 13:1 Comp.
CAMSHAFT - BILLET - MIDRANGE GRIND $150.00 #12615B For use with stock ignition and any of our kits above. CAMSHAFT - BILLET - RACE GRIND $165.00 #12616B Designed for use with our ignition, will not perform well with stock ign. 26mm MIKUNI ROUND SLIDE CARB $220.00 #20536 For engines 143ccs or larger. VENTED VALVE CAP $45.00 #18530 Choose Red, Blue, Gold or Silver EXHAUST - THRUST CHAMBER $45.00 #17103 Works with stock spark arrestor. Choose: Gold, Silver, Blue. IGNITION - POWROLL PVL SYSTEM $599.00 #18537 CLUTCH SPRINGS $29.00 #16784
KIT INCLUDES: 26mm Round Slide Mikuni, pre-jetted for our 143cc kit. Extra main jets for larger and smaller engine congurations. Detailed installation instructions and jetting specications.
INCLUDES: ALL new ignition parts: Low-resistance spark plug cap, coil, ignition unit, stator, rotor and rotor puller. Step-by-step installation instructions are included - in English! NOTE: Engine should be bump-started when cold.
PISTON KIT - BORE-IN 143cc HI COMP. $275.00 #00331F 61mm Piston, 12.5:1 Compression. PISTON KIT - BORE-IN 143cc LO COMP. $160.00 #00331S 61mm Piston, 11:1 Compression. BORE-STROKE COMBO - 170cc $420.00 #00331S-16086 61mm Piston. 9mm Stroke. 13:1 Comp. CAMSHAFT - BILLET - MIDRANGE GRIND $150.00 #12615B Billet cam, no core required. CAMSHAFT - BILLET - RACE GRIND $165.00 #12616B Works with stock ignition. Great with our 170cc kit. Billet cam, no core required. CLUTCH SPRINGS $29.00 #16784
KYMCO ATVs
KYMCO BLING - MONGOOSE 250 & 300, MXU 300 & 500
The Defuglifier! ALUMINUM SHINE FOR YOUR MXU #18603 $100.00 Sale! $60.00 Complete kit includes: 2 Hydraulic Brake Reservoir caps, 1 Oil fill Cap, 1 Timing Access Cap.
Replace the ugly and heavy stock covers with these great looking, lightweight and high quality items. Aluminum CNC machined covers in annodized Blue, Red, or Silver.
KYMCO MONGOOSE 90
PISTON KIT - RE-SLEEVE 120cc $279.00 #00347 53.5mm piston, 12:1 compression.
INCLUDES: Piston, pin, rings, circlips, headgasket, sleeve. REQUIRES: Re-sleeving, Boring, rejetting. INCLUDES: Piston, pin, rings, teon pin retainers, headgasket. REQUIRES: Bores into the Powroll sleeve from kit #00346. INCLUDES: Piston, pin, rings, circlips, headgasket, sleeve. REQUIRES: Re-sleeving, Boring, rejetting.
PISTON KIT - OVERSIZE FOR 120cc KIT $185.00 #00347B 54mm Piston, 12:1 Compression.
PISTON KIT - RE-SLEEVE 124cc FOR USE WITH KYMCO PEOPLE 150 HEAD $335.00 #00365 55mm piston, 12.5:1 compression CAMSHAFT - HARDWELD - RACE GRIND
Uses stock springs and rockers. REQUIRES: For #12761 send good core for work.
CAMSHAFT - HARDWELD - RACE GRIND FOR 150 HEAD $195.00 on your good core (#12733), or $275 outright (#12773-22773G)
Uses stock 150 springs and rockers. REQUIRES: People 150 head, rockers, valves. For #12733 send good core for work.
PG 11
KYMCO ATVs
1:1 requires race gas).
Uses stock springs and rockers. REQUIRES: Core Exchange or Core Charge (see PG 2). This slip-on system features a spark-arrested Supertrapp IDS2 mufer.
CAMSHAFT - HARDWELD - MID-TOP END GRIND $200.00 on your good core (#12767), or $280.00 outright (#12767-22767G)
CAMSHAFTS - HARDWELD - MID-TOP END GRIND $400.00 on your good cores (#12772), or $550.00 outright (#12772-22771GE/GI) CAMSHAFTS - HARDWELD - WOODS GRIND $400.00 on your good cores (#12771), or $550.00 outright (#12771-22771GE/GI)
Uses stock springs and rockers. REQUIRES: Core Exchange or Core Charge (see PG 2).
YAMAHA TT-R 50
111cc SUPER PRO KIT $1,822.00 #SP105 *SPECIAL ORDER
YAMAHA MOTORCYCLES
50mm BORE, 56.5mm STROKE, 11:1 COMPRESSION INCLUDES: Powroll Super Pro Big Valve Head Hardweld Camshaft Keihin Carb Kit w/ extra jets, manifold, gasket, th ork: Includes Powroll Tough Rod, crank pin and needle assembly. REQUIRES: Send your crank to Powroll for modication, read PG 2 for details on shipping cranks to us.
EXHAUST - THRUST CHAMBER $45.00 #17103 Works with stock mufer. Choose Gold, Silver or Blue.
PISTON KIT - STANDARD HI COMP 85cc $250.00 #00357 47mm Piston, 11.5:1 Compression. Standard GYTR Size. STROKE 4.9mm $260.00 #16030 93ccs with the GYT-R 47mm Piston
INCLUDES: Work done on yo amaha part # GYT-1P605-50-00) or equivalent (GYTR piston works with no modication, other pistons may require modication to t). Uses stock valve springs. REQUIRES: Core Exchange (GYT-R cam only, not stock TT-R50) or Core Charge, (see PG 2).
INCLUDES: Piston, pin, rings, circlips, headgasket. REQUIRES: TTR90 or GYTR cylinder and head. Rejet. Premium pump fuel.
CAMSHAFT - HARDWELD - MID-TOP END GRIND $195.00 on your good core (#12753), or $275.00 outright (#12753-22747G)
YAMAHA TT-R 90
PISTON KIT - RE-SLEEVE 120cc $279.00 #00346 53.5mm piston, 11:1 compression.
INCLUDES INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket, sleeve. REQUIRES: Re-sleeving, Boring, rejetting.
PISTON KIT - OVERSIZE FOR 120cc $185.00 #00346B 54mm Piston, 11:1 Compression. PISTON KIT - BORE-IN 101cc $165.00 #00324 49.5mm Piston, 11:1 Compression. PISTON KIT - OVERSIZE FOR 101cc
INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring, rejetting. RECOMMENDATIONS: Sea Level use 100+ octane.
$165.00 #00324B 50mm Piston, 11:1 Comp. .020 Oversize. INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring, rejetting.
CAMSHAFT - HARDWELD - MID-TOP END GRIND $195.00 on your good core (#12753), or $275.00 outright (#12753-22747G)
BORE-STROKE COMBO 130cc $390.00 #00364-16026 54mm piston, +2.5mm Stroke, 13.5:1 Compression
INCLUDES: BORE-IN Piston Kit: Piston, pin, rings, clips, head/base gaskets. 56.5mm STROKE: Work done on good stock crank assy. REQUIRES: Boring. Send crank for work, see pg 2. Rejetting (GYTR Kit). Uses stock valve springs. REQUIRES: 130cc Bore/Stroke Combo.
CAMSHAFT - HARDWELD - MID-TOP END GRIND $195.00 on your good core (#12753), or $275.00 outright (#12753-22747G)
PISTON KIT - RE-SLEEVE (Case Mach Reqd) 160cc $325.00 #00337 61mm Piston, 13:1 Compression.
INCLUDES: Sle
STROKE +2.5mm $440.00 #16081 170ccs with our 61mm piston kit. Stock stroke 54mm.
INCLUDES: Work done on you structions included). RECOMMENDATIONS: Works best with Powroll pistons. Modications may be required if using other piston or cams. Lift .257 IN/.256 EX. Works with stock valve springs and retainers. REQUIRES: Core Exchange or Core Charge (see PG 2).
CAMSHAFT - HARDWELD - RACE GRIND $195.00 on your good core (12747), or $275.00 outright (12747-22747G) CLUTCH SPRINGS $29.00 #16782 Stainless steel for better strength and heat resistance. EXHAUST - THRUST CHAMBER $45.00 #17103 Works with stock spark arrestor. Choose Gold, Silver or Blue.
YAMAHA MOTORCYCLES
YAMAHA YZF & WR 250 & 426
YZF-WR 250 STROKE 2.0mm $400.00 #16089 260ccs YZF-WR 426 STROKE 2.0mm $400.00 #16091 440ccs
INCLUDES: Work done on your crank and piston. REQUIRES: Send crank and new stock piston for work, see pg 2.
PG 12
YAMAHA ATVS
YAMAHA RAPTOR 250
PISTON KIT - RE-SLEEVE 298cc $350.00 #00362
81mm Piston, Choose 11.6:1 or 13.5:1 Compression. INCLUDES: Pi
CAMSHAFT - HARDWELD - MID-TOP END GRIND $call + Core $call Cam #12770 Core #22770G VALVE SPRINGS w/ CROMOLY RETAINERS $call #24041
For use with our cam shown above.
Designed specically to make the best power possible with our 298cc kit. REQUIRES: Valve spring kit. Core Exchange/Core Crg (see PG 2).
PISTON - OVERSIZE FOR 430cc KIT 86.5mm (+ .020) #00272B $215.00 87mm (+ .040) #00272D $215.00
86mm Bore, +9.5mm Stroke, 11.5:1 Compression INCLUDES: 86mm Forged Piston, pin, rings, circlips, headgasket, sleeve. Work done on your crank. REQUIRES: Send crank for work, see pg 2. Cylinder re-sleeving and bore. Case Machining and windage tray modication, instructions included. Rejetting.
INCLUDES: 11:1 compression cast Piston, pin, rings, circlips, headgasket. REQUIRES: Bores into Powroll 430cc kit sleeve. Pre-Jetted for engines 400cc or larger. INCLUDES: Throttle Assembly, K&N Filter. Will not work with stock airbox.
CAMSHAFT NOTE: Yamaha 350 cams are NOT interchangeable. Choose the correct year and model.
CAMSHAFT - HARDWELD - TORQUE RAPTOR 350 2007 & LTR $150.00 #12763L - Done on your good core RAPTOR 350 2004-2006 $150.00 #12763 - Done on your good core WARRIOR $150.00 #12742 - Done on your good core
Lift .390 Intake, .390 Exhaust. REQUIRES: Send in your good cam core for work, 3-6 week turn around (see PG 2).
CAMSHAFT - HARDWELD - MIDRANGE RAPTOR 350 2007 & LTR $150.00 #12764L - Done on your good core RAPTOR 350 2004-2006 $150.00 #12764 Done on your good core WARRIOR $135.00 #12708 - Done on your good core CAMSHAFT - RACE GRIND RAPTOR 350 2007 & LTR $150.00 #12765L - Done on your good core RAPTOR 350 2004-2006 $150.00 #12765 - Done on your good core WARRIOR $150.00 #12734 - Done on your good core
Lift .430 Intake, .430 Exhaust REQUIRES: Valve Springs #24028T. Send in your cam for work, 4-6 week turn-around (see PG 2)
Lift .430 Intake, .430 Exhaust. REQUIRES: Valve Springs #24028T. Send in your cam for work, 4-6 week turn-around (see PG 2).
VALVE SPRINGS $110.00 #24028T INCLUDES: 2 Inner Springs, 2 Outer Springs, Titanium Retainers, Bottom Cups, Heavy Duty Keepers. VALVES - STAINLESS STEEL Valves are sold each. You will need to purchase 1 intake and 1 exhaust valve for a complete set.
STANDARD INTAKE $55.00 #24520 1mm OVERSIZE INTAKE $55.00 #24520A STANDARD EXHAUST $55.00 #24521
WOLVERINE ONLY - CAMSHAFT - HARDWELD - MID-TOP END GRIND $135.00 Cam #12742 - Done on your good core
Lift .390 Intake, .390 Exh. Works well with our 365cc kit and stock size tires. Oversize tire kits should use stock cam. REQUIRES: Send in your cam for work - 4-6 week turn-around.
PG 13
PISTON KIT - OVERSIZE FOR Std. Hi Comp $290.00 #00323B 100.5mm, 11:1 Compression
INCLUDES: Piston, pin, rings, circlips, headgasket, basegasket. REQUIRES: Boring. Must run race fuel, 108 octane or greater.
BORE & STROKE COMBINATION 730cc $585.00 #00353-16097LR 102mm BORE, +5mm STROKE, 11:1 Comp
Bore Kit and Stroke Work will not work separately. INCLUDES: 102mm Piston Kit: Piston, pin, rings, circlips, headgasket, basegasket. 5.0mm Stroke: REQUIRES: Cylinder bore, windage tray modication. Installation instructions are included. Send crank for work, see pg 2.
PISTON KIT - STANDARD HI COMP $290.00 #00323 100mm Piston, 11:1 Compression PISTON KIT - OVERSIZE FOR Std. Hi Comp $290.00 #00323B 100.5mm, 11:1 Compression BORE & STROKE COMBINATION 730cc $630.00 #00353-16088LR 102mm BORE, +5mm STROKE, 11:1 COMP.
INCLUDES: 102mm Piston Kit: Piston, pin, rings, circlips, headgasket, basegasket. 5.0mm Stroke: Work done on your crank. REQUIRES: Cylinder bore, windage tray modication. Installation instructions are included. Send in your crank for stroke modication. See Pg 2 for details. Bore Kit and Stroke Work will not work separately. INCLUDES: 105mm Piston Kit: Piston, pin, rings, circlips, headgasket, basegasket, sleeve. 5.0mm Stroke: Work done on your crank. REQUIRES: Cylinder re-sleeving, bore, case machining and windage tray modication. Installation instructions are included. 39mm FCR Carb Kit, Race Cam, Clutch Springs shown below. These are minimums to make this kit run. Race Gas 112 Octane. Send in your crank for stroke modication, see page 2 for info. Bore Kit and Stroke will not work separately. Lift .340IN, .255 EX. Duration 242 IN, 245 EX @.050 Requires: Send in good core, turn around 4-5 weeks. REQUIRES: Valve Springs #24039. Hardfaced Rockers. Send in good core, turn around 4-5 weeks. REQUIRES: Valve Spgs #24039. Hardfaced Rockers. Send in good core, turn around 4-5 weeks. Strongly recommend with aggressive high-lift cam grinds. REQUIRES: Send in your rockers, aprox. turn-around 4-6 weeks. Recommended only with our 770cc kit, Race or NOS grind cam, and oversize valves.
BORE & STROKE COMBINATION 770cc $795.00 #00326-16088LR 105mm BORE, +5mm STROKE, 12:1 COMP.
CAMSHAFTS - HARDWELD - Done on your good core MID-TOP END GRIND #12752 $180.00
HARDFACED ROCKERS - SPECIAL ORDER $280.00 (Set) #23003 Done on your good cores VALVE SPRINGS w/ TITANIUM RETAINERS $175.00 #24039
STAINLESS STEEL VALVES $55.00 each (Special Order) Purchase 3 Intake valves and 2 Exhaust valves for a complete set of 5. INTAKE - 1MM O/S #24524A EXHAUST - STOCK SIZE #24525 39mm FCR CARB SET $999.00 #20533 (Special Order) RECOMMENDED FOR 770cc AND LARGER ENGINES
INCLUDES: Two Keihin 39mm FCR Carburetors. Manifold, Airboot adaptors and o-rings (to work with stock airbox). Cable adaptor to work with stock throttle assembly. Complete installation and tuning instruction booklet. Pre-jetted for our 770cc kit.
OTHER PRODUCTS
POWROLL LOGO TEE $call STICKER KIT $ 7.95 #DECALKIT Free Shipping! TITANIUM KEYCHAIN BAG-MINIKEY $9.95 TWO STROKE STROKER CRANKS
HONDA TRX 250R 2mm #15801 $250.00 HONDA TRX 250R 4mm #15802 $250.00 HONDA CR 250R 2mm #15803 $250.00 HONDA CR 250R 4mm #15804 $250.00
POWROLL OIL
We stroke your stock crank assembly and re-install the tins. Rod length is not changed, so a spacer plate or other modications will be required. Send us your crank (see instructions on PG 2) and a new rod assembly.
POWROLL 40w RACING OIL QUART #18513 $9.00 CASE (12 Quarts) #18513C $95.00 POWROLL 20w50 OIL QUART #18512 $9.00 CASE (12 Quarts) #18512C $95.00
www.powroll.com