Académique Documents
Professionnel Documents
Culture Documents
ATS controllers
InteliATS NT
STD, PWR
InteliATS NT STD and PWR models are new controllers designed to monitor the AC mains supply for under/over voltage, under/over frequency and voltage unbalance. Any mains supply disproportion causes the remote gen-set to start and makes change over for both generator and mains contactors. type control unit (e.g. the ComAp InteliLite NT MRS 10 controller). Automatic transfer between mains and generator power On-site controller conguration Remote conguration and monitoring Inputs/outputs congurable for various customer needs Mains measurements: U1-U3, Hz Generator measurements: U1-U3, Hz I1-I3, kVA, kW, kVAr, kWh (PWR)* Event based history le (PWR)*
* Stated features available on this model
Gen-set controllers
InteliLite NT
MRS
InteliLiteNT MRS models are integrated controllers for single engine control in Manual and Remote Start applications, featuring full gen-set monitoring and protection. The 4 MRS models are identied by a number which denes model capability (10, 11, 15, 16).
* Stated features available on this model
Support of engines equipped with ECU J1939 interface (15, 16)* Automatic/Manual start/stop of gen-set Push buttons and LEDs for simple control Parameters adjustable via keyboard or PC 3 phase Generator protections Generator measurements (50 / 60 Hz): U1-U3, I1-I3, Hz, kVA, kW, kVAr, kWh Congurable programmable inputs and outputs Event based history le (15, 16)* Web based monitoring and control Wide range of remote communications
InteliLite NT
AMF
InteliLiteNT AMF models are integrated controllers for gen-sets operating in single standby mode. They meet all possible requirements for AMF applications, including modem control, user conguration and full gen-set monitoring and protection. The 2 AMF models are identied by a number which denes model capability (20, 25).
* Stated features available on this model
Support of engines equipped with ECU J1939 interface (25)* Automatic/Manual start / stop of gen-set Push buttons and LEDs for simple control Parameters adjustable via keyboard or PC Mains measurements (50 / 60 Hz): U1-U3, Hz Generator measurements (50 / 60 Hz): U1-U3, I1-I3, Hz, kVA, kW, kVAr, kWh Congurable programmable inputs and outputs Event based history le (25)* Web based monitoring and control Wide range of remote communications
InteliCompact NT
SPtM, MINT
InteliCompactNT SPtM and MINT models are new integrated controllers for gen-sets operating in both standby and parallel modes. The controllers feature easy to use functionality, conguration and installation and and digital isochronous load 32 gen-sets is a standard feature.
AMF continuous parallel function , Peak shaving, Mains export/import Support of engines equipped with ECU (J1939, Modbus and other proprietary protocols); alarm codes displayed in text form Baseload, Load sharing multi-gen-set mode customer needs Event based history le
benet from a built-in synchronizer Optimizing the running of each engine in sharer. Native cooperation of up to Inputs/outputs congurable for various
MainsCompact NT
MainsCompactNT is designed for multiple (up to 31) gen-sets controlled by InteliCompactNT and operating in parallel to mains. MainsCompactNT controller connects the group of gen-sets to the mains.
Mains measurements: U, I, Hz, kW, kVAr, kVA, PF kWh, kVAhr , Bus measurements: U, I, Hz Mains failure detection using integrated mains protections Systems with as well as without master generator breaker supported Congurable level switches based on mains import or object consumption Event based history le
Gen-set controllers
InteliGen NT
InteliGenNT is a comprehensive controller for both single and multiple gen-sets operating in standby or parallel modes. Compact construction is optimized for these purposes; various HW modications allow the customer to select the optimum type for a particular application. AMF continuous parallel function , Support of engines equipped with ECU (J1939, Modbus and other proprietary protocols); alarm codes displayed in text form Baseload, Import/Export, Peak shaving, Voltage and PF control Optimizing the running of each engine in multi-gen-set mode Inputs/outputs congurable for various customer needs Event based history le with up to 500 records Integrated PLC programmable functions
InteliSys NT
InteliSysNT is an expandable controller for both single and multiple gen-sets operating in standby or parallel modes, especially in CHP (cogeneration) and other complex applications. of IS-NT-BB and IS-Display or with the potential for many different extension modules designed to suit individual customer requirements.
CHP support (programmable PID loops and other built-in PLC functions) Support of engines equipped with ECU (J1939, Modbus and other proprietary protocols); alarm codes displayed in text form Peak shaving, Voltage and PF control multi-gen-set mode Inputs/outputs congurable for various customer needs Event based history le with up to 1000 records
Detachable construction (consisting Baseload, Import/Export, TempByPower, InteliVision) allows easy installation Optimizing the running of each engine in
InteliMains NT
InteliMainsNT is designed for multiple (up to 31) gen-sets operating in parallel to mains. InteliMains controller connects the group of gen-sets to the mains. It can serve as a bus-tie synchronizing controller between two groups of gen-sets.
Mains measurements: U, I, Hz, kW, kVAr, kVA, PF kWh, kVAhr , Bus measurements: U, I, Hz Mains failure detection using integrated mains protections Bus-tie application Selectable partial or full MCB control Congurable level switches based on mains import or object consumption Event based history le
Generator controllers
InteliGen NT GeCon
InteliGenNT GeCon provides comprehensive generator protection and control for single or multiple gen-sets equipped with an independent engine controller. Special congurations optimized for use in marine and land-based installations allow customers to select a tailored solution for their application with the option of modied options for critical applications. GeCon only controls generator part of a gen-set since the engine control is provided by an engine controller Two GeCon controllers can be used in either Master & Hot-Standby or Master & Protection applications Cooperation with the engine controller is achieved using minimum inputs and outputs Accepts external automatic or manual control of both engine and breaker Baseload, Import/Export, Analog external load control Optimizing the running of each engine in multi-gen-set mode Event based history le with up to 500 records
Engine controllers
InteliDrive Lite
InteliDrive Lite is a cost effective sophisticated engine controller, which features outstanding control, monitoring and protection for both mechanical and electronic diesel / gas engines in one unit. The extended product family offers a range of engine specic versions suitable for land-based and marine non-classied applications. Engine control, monitoring and protection J1939 interface supporting wide range of EFI engines Speed measurement from pickup or from J1939 6 congurable binary inputs and outputs, 3 cogurable analog inputs Support of plug-in modules: IL-NT AIO, IL-NT AOUT8, IL-NT BIO8, IL-NT IO1 PLC functions: PID loop, Comparators, Timers Setpoints adjustable via keyboard or PC Password protection
InteliDrive
DCU Industrial
InteliDrive DCU Industrial is a highly exible sophisticated engine controller, which features outstanding control, monitoring and protection for both mechanical and electronic diesel / gas engines as well as peripheral equipment. Industrial software contains a set of programmable functions like comparators, timers, PID loops, logic functions and others for easy solution of any industrial application. Engine sequencing and control J1939 interface supporting wide range of EFI engines Engine monitoring and protections Integrated PLC Speed measurement from magnetic pick-up or from J1939 Running hours meter, number of starts counter 14 binary inputs, 14 binary outputs, 8 analog inputs Input/output conguration Setpoints adjustable via keyboard or PC Recommended extension: ID-SCM, ID-SCM1
InteliDrive
DCU Marine
InteliDrive DCU Marine is an engine controller designed specially to meet the demanding needs of the marine market; providing a high level of performance coupled with extensive J1939/J1587 communication capabilities and incorporating hardwired safety functions and primary/secondary power switching. Engine sequencing and control Engine monitoring and protection Congurable J1939 interface with electronic engines including ECU Alarm indication Redundant module ID-RPU with hardwired safety functions activated in backup mode Automatic switchover to backup mode in case of detection of main unit failure Setpoints adjustable via keyboard or PC Recommended extension: ID-RPU
Accessories
EXTENSION MODULES
IA-NT IL-NT IC-NT MC-NT IG-NT/ IS-NT IM-NT ID-Lite ID
I-AOUT8 ID-RPU ID-SCM IG-IOM IGL-RA15 IGS-PTM IL-NT AIO IL-NT AOUT8 IL-NT BIO8 IL-NT IO1 IS-AIN8 IS-BIN16/8 NT-Converter
REDUNDANT PROTECTION UNIT SPEED CONTROL MODULE ANALOG/BINARY INPUT/ OUTPUT MODULE REMOTE ANNUNCIATOR ANALOG/BINARY INPUT/ OUTPUT MODULE ANALOG INPUT/OUTPUT MODULE ANALOG OUTPUTS FOR PWM GAUGES MODULE BINARY INPUT/OUTPUT (PWM) MODULE ANALOG INPUT/OUTPUT MODULE ANALOG INPUT MODULE BINARY INPUT/OUTPUT MODULE LOAD SHARING INTERFACE MODULE
IG-NT/ IS-NT
C O M M U N I C AT I O N M O D U L E S
IA-NT
IL-NT
IC-NT
MC-NT
IM-NT
ID-Lite
ID
IB-Lite I-CR ID-COM IG-IB I-LB+ IL-NT RS232 IL-NT RS232-485 IL-NT S-USB
ETHERNET MODULE CAN REPEATER MODULE COMMUNICATION MODULE INTERNET BRIDGE LOCAL BRIDGE RS232 EXTENSION BOARD DUAL PORT EXTENSION BOARD PLUG-IN SERVICE USB MODULE
IG-NT/ IS-NT
E C U C O M M U N I C AT I O N M O D U L E S
IA-NT
IL-NT
IC-NT
MC-NT
IM-NT
ID-Lite
ID
I-CB
S I M U L AT O R S
IA-NT
IL-NT
IC-NT
MC-NT
IM-NT
ID-Lite
ID
MultiKit StarterKit
ADDITIONAL MODULES
IA-NT
IL-NT
IC-NT
MC-NT
IG-NT/ IS-NT
IM-NT
ID-Lite
ID
IG-NT
IS-NT
IM-NT
ID
ADDITIONAL REMOTE DISPLAY CONTROLLER COLOUR DISPLAY UNIT REMOTE DISPLAY WITH CAN BUS INTERFACE DETACHABLE DISPLAY MODULE
PC tools
MONITORING SW
IA-NT IL-NT IC-NT MC-NT IG-NT/ IS-NT IM-NT ID-Lite ID
DriveMonitor
PC MONITORING TOOL
InteliMonitor
PC MONITORING TOOL
InteliSupervisor
PC TOOL FOR GEN-SET FLEET MANAGEMENT
WinScope
SPECIAL GRAPHICAL CONTROLLERS MONITORING SOFTWARE
C O N F I G U R AT I O N S W
IA-NT
IL-NT
IC-NT
MC-NT
IG-NT/ IS-NT
IM-NT
ID-Lite
ID
DriveCong
PC CONFIGURATION TOOL
GenCong
PC CONFIGURATION TOOL
C O N F I G U R AT I O N A N D M O N I T O R I N G S W
IA-NT
IL-NT
IC-NT
MC-NT
IG-NT/ IS-NT
IM-NT
ID-Lite
ID
LiteEdit
PC CONFIGURATION AND MONITORING TOOL
Mains protections
NPU-FUV
3-phase mains protection Vector shift protection 2 stage over/under frequency protections 2 stage over/under voltage protections Voltage asymmetry protections Meets applicable requirements of IEC 60255 Designed with the aim of satisfying the G59, ETR113, G77, G83 and G10 guidelines
InteliProtec
Integrated protection solution for generators operating in parallel to mains applications 2 stage over/under voltage protections 2 stage over/under frequency protections Vector shift Rate of change of frequency Over current, NVD Reverse power Earth fault protections Short term parallel protection Satises G59 guidelines
InteliVision is a new generation color display unit for either InteliGenNT, InteliSysNT, InteliMainsNT or InteliDrive controllers. It is designed as a simple, easy to use Plug and Play solution, which also features our unique TRENDS monitoring as a standard feature.
The interactive simulator provides a taste of the new InteliVision, with demo and preview options illustrating screen information and function.
r lato simu E
ONL
IN
www.comap.cz/intelivision
PLC Editor
New configuration tool for selected ComAp controllers
Key features of new release
PLC functions can be moved both horizontally and vertically Colour-coded and linked to relevant functions Blocks can be organized to reect the real process ow Groups of blocks can be separated on each sheet to form sub-sets within the design Detailed descriptions of inputs and outputs come complete with useful hints The new ComAp PLC Editor is currently free to users who complete a short questionnaire on the ComAp website www.comap.cz allowing user analysis to be reviewed. For more information visit
www.comap.cz
Full name InteliATSNT InteliLiteNT InteliCompactNT MainsCompactNT InteliGenNT InteliSysNT InteliGenNT and InteliSysNT InteliMainsNT InteliDrive Lite InteliDrive InteliVision
Short name IA-NT IL-NT IC-NT MC-NT IG-NT IS-NT IG-NT/IS-NT IM-NT ID-Lite ID IV
Pictogram
Power plant, Switzerland The power plant stands in the built-up area Am Mark in Heerbrugg and provides power for the nearby residential apartments and a large shopping centre. The plant features an Olympian GEP4002 diesel gen-set producing 400 kVA with control and monitoring from ComAp using InteliGenNT unit in MINT application with two InteliMainsNT units in MGCB application.
Cabo Corrientes and Puerto Madryn, Argentina The Argentinian Coast Guard vessels GC 73 Cabo Corrientes and GC 78 Puerto Madryn are both equipped with ComAp generator and propulsion engine control and monitoring systems. The onboard generators powered by Perkins engines use InteliGenNT Marine, whilst the ships MTU propulsion engines rely on two InteliDrive DCU Marine and additional modules to provide a control package which includes controlling engine speed and gear box. The complete system is easily managed using two full colour InteliVision and IG-Display units.
Boss Industries, USA ComAps compressor and engine control panel solution optimizes natural gas production on Bosss booster units by providing accurate process control using digital pressure transducers. Our customers are very happy with its event history capabilities as well as its compressor and engine protective features. We also value the fact that the ComAp ID-DCU panel is fully compatible with future electronic emission certied engines and control capabilities. BOSS Industries has standardized on the ComAp panel for our gas well booster compressor units. Ed Ketcham, VP Sales www.bossair.com
Download
Free
www.comap.cz
Local Distributor / Partner
Manufacturer ComAp, spol. s r. o. Czech Republic Phone: + 420 246 012 111 Fax: + 420 266 316 647 E-mail: info@comap.cz Internet: www.comap.cz
ComAp. 2009-11/CPLEPROV. All rights reserved. Specications in this material are subject to change without notice.