Académique Documents
Professionnel Documents
Culture Documents
In Service Performance
Features
Ultimate long term corrosion and abrasion resistance High levels of aluminium pigmentation IMO PSPC compliant Excellent long term performance at a wide range of film thicknesses Excellent edge retention Universal application at Newbuilding and Maintenance & Repair Low temperature cure and year round workability
Benefits
Long term asset protection, control of future maintenance costs and return on investment Corrosion control - long term asset protection Meets latest regulatory requirements Excellent crack resistance at high DFT and anticorrosive protection at low DFT Corrosion control - long term asset protection Improved coating process productivity and reduced waste Improved coating process productivity and control of application costs
Excellent long term performance in crude oil tanks after 15 years in service Excellent long term performance in water ballast tanks after 15 years in service
Product Information
Colour Surface preparation Volume solids Typical film thickness Hard dry ENA300 Bronze, ENA301 Aluminium Surface should be clean, dry and free from contamination 60% 2% (ISO 3233:1998) 2 x 125 micons or 2 x 160 microns (PSPC - ballast tanks) 6 hours @ 25C
Excellent anti-abrasive performance in cargo holds after 7.5 years in service
Minimum application temperature -5C Method of application Airless Spray, Brush, Roller
For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website.
Intershield 300
Edges in water ballast tanks are generally the first areas to experience coating breakdown. Correctly formulated edge retentive coatings mean that the same film thickness can be achieved on edges as that applied to flat surfaces
Universal Application
Typical Vessel Areas
EXTERNAL DECKS
The high performance and flexibility of Intershield300 means the production demands of the shipyard can be satisfied, whilst still meeting the long term in service performance expectations of the vessel owner.
UNDERWATER HULL
Anti-Abrasive
Panels show excellent anti-abrasive properties using an in-house test method, developed in association with the Newcastle University Marine Department, UK, which simulates realistic in service conditions. Coatings tested with coal cargo at 31000kg/m2, followed by 18 months immersion in seawater.
True appearance of the coating after cleaning of the ballast tank - 15 years
Intershield300
Unless otherwise agreed in writing, all products supplied and technical advice or recommendations given are subject to the Conditions of Sale of our supplying company.
www.international-marine.com
November 2011
, International and all products mentioned in this publication are trademarks of or are licensed to AkzoNobel AkzoNobel, 2011 International Paint Ltd, Stoneygate Lane, Felling, Gateshead NE10 0JY. Tel: +44 (0)191 469 6111 Fax: +44 (0)191 495 2003