Académique Documents
Professionnel Documents
Culture Documents
Job No Sample No Client Contractor Consultant Project Name Reference No Material Description Concrete Grade Date of casting Conc. Location / Structural Member : 52-270009 : 2700023 Report No : BHU/52-270009/CUBE/2700023 Report Date : 31-Dec-11
: Dy.Ex.Engineer, PIU Bhuj-Kutch : Shree Shakti Construction, Bhuj. : New construction of 5 sub center Valka Mota, Amara, Devisar, Virani Moti & Nakhatrana-1, Ta.: Nakhatrana.Dist.-Kutch (RIDF NABARD), Sub center - Valka Mota : Letter Date: 26/12/11 : Concrete Cube ( 150 x 150 x 150 mm ) : M-25 : 23-Dec-11 : RCC Column upto GB
Client Ref: -
Fracture Type
150 8.64 2560 440.6 150 8.52 2524 420.1 150 8.40 2489 452.5 Fracture Type: 1 = Satisfactory, M M25 25 M30 M 30 M35 M 35
Requirement as per I.S 456 - 2000, Clause: 6.2 (Table-2) M10 10 M2020 Grade Designation M15 15 Grade Designation M M M Required Characteristics compressive strength of 150mm size cube at 28 days in N/mm2 Test Method Sampling Method Curing Condition Method Variation Tested by : : : : :
10 10
15 15
20 20
2525
30 30
35 35
40 40
45 45
I.S 516 - 1959 (Reaffirmed 2004) : Clause 5.0 I.S 516 - 1959 (Reaffirmed 2004) : Clause 2.0 I.S 516 - 1959 (Reaffirmed 2004) : Clause 3.0 MV
Checked by :
NOTE: 1.This certificate or report may not be published for commercial purpose except in full unless permission for the publication of an approved abstract has been obtained from the, GEO TEST HOUSE,Vadodara. 2.This test certificate applies only to the samples received in the laboratory.
: Dy.Ex.Engineer, PIU Bhuj-Kutch : Shree Shakti Construction, Bhuj. : New construction of 5 sub center Valka Mota, Amara, Devisar, Virani Moti & Nakhatrana-1, Ta.: Nakhatrana.Dist.-Kutch (RIDF NABARD), Sub center - Valka Mota : Letter Date: 26/12/11 : Concrete Cube ( 150 x 150 x 150 mm ) : M-25 : 23-Dec-11 : RCC Column upto GB
Client Ref: -
Fracture Type
150 8.36 2477 576.7 150 8.50 2519 600.1 150 8.72 2584 642.2 Fracture Type: 1 = Satisfactory, M M25 25 M30 M 30 M35 M 35
Requirement as per I.S 456 - 2000, Clause: 6.2 (Table-2) Grade Designation M10 10 M2020 M15 15 Grade Designation M M M Required Characteristics compressive strength of 150mm size cube at 28 days in N/mm2 Test Method Sampling Method Curing Condition Method Variation Tested by : : : : :
10 10
15 15
20 20
2525
30 30
35 35
40 40
45 45
I.S 516 - 1959 (Reaffirmed 2004) : Clause 5.0 I.S 516 - 1959 (Reaffirmed 2004) : Clause 2.0 I.S 516 - 1959 (Reaffirmed 2004) : Clause 3.0 NP
Checked by :
NOTE: 1.This certificate or report may not be published for commercial purpose except in full unless permission for the publication of an approved abstract has been obtained from the, GEO TEST HOUSE,Vadodara. 2.This test certificate applies only to the samples received in the laboratory.