Vous êtes sur la page 1sur 35

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Microsoft's Windows 98 SE - CD Install on Blank Hard Drive

INTRODUCTION
What you will require to do this walkthrough is 1. A Windows 98 CD 2. A Computer with CD-ROM access To start this Windows install. First check that the first boot device in your system BIOS is set to the CD-ROM Drive. ( To find out how to access the BIOS please refer to your motherboard manual or the manufacturer of your computer. (The system bios can usually be entered on boot, usually by pressing the F1, F2, F8, F10 or DEL key. Make sure you save the settings before exiting)) If you are unsure or don't want to enter the BIOS then just test the computer by putting the CDROM in the drive and rebooting the computer. This is the recommended way to install windows. You will know that your computer will/has booted of CD-ROM when the following screen appears.

PART 1

To begin the Windows 98 install select Option 2 (Boot from CD-Rom)

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

The following screen will appear next. Select Option 1. (Start Windows 98 Setup from CDROM)

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Your CD-ROM driver will now install, be patient this may take a few moments.

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Now press Enter to continue, or F3 to exit.

Setup will now perform checks on your system, press Enter to continue.

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Next Scandisk will run, let this complete or setup.

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Now setup will copy important files for the install.

PART 2

Setup has now begun, the mouse should now be active, press Continue to proceed. If you have a change of mind then press Exit Setup. If the mouse is not active press "ENTER" on the keyboard.

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

The wizard will now start. Be patient this may take a few moments.

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Now select the directory you wish to install Windows into. By default C:\Windows will be selected. You can change this, but it is not advised. Click on Next to Continue.

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Setup will now prepare the directory, be patient this may take a moment.

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Setup now checks disk space.

10

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

What do you wish to install. We recommend Typical, which is the default. So click Next to continue.

11

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Windows Components to be installed will now be listed. Leave at default and press Next.

12

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

If a Network card has been detected the following will appear. Fill in the details and click Next.

13

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Now your country settings, select as needed and then press Next.

14

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Windows will now copy files, this will take sometime. Be patient

15

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

PART 3

After sometime you will be prompted to restart, Windows will do it itself, you can click on Restart Now to quicken the process.

16

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

The CD-ROM boot menu will appear. Select option 1 (Boot from Hard Disk)

17

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Booting for first time screen will appear.

18

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Now enter your name, company is optional. Click on Next to continue.

Now the License Agreement. Read and if you agree click on "I accept the Agreement" and click next. If you select ""I don't accept the Agreement" then setup will end.

19

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Now input your product key or certificate authenticity code. This is 16 digits and is located on the back of your CD case or on the Windows 98 Book. If you have an OEM computer then it could be on the side or back of your computer. Click next to continue.

20

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Next click on Finish.

21

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

PART 4

Setup will now finalize the hardware and install settings.

22

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Plug and Play Devices.....

23

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Your computer will prompt to restart....

24

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

The CD boot menu will appear. Select option 1 (Boot from Hard Disk) and press enter.

25

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Windows is booting.

26

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

and continuing the install of devices.

PART 5

Now select your date/time settings, using the down arrow beside GMT -0800.

27

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Once selected click on apply and then OK.

28

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Windows will continue to setup Windows items.

29

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

The computer will now need restarted again.

30

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

PART 6

The CD-ROM boot menu will appear. Select Option 1 (Boot from Hard Disk) and press enter.

31

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Windows will continue to load.

32

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

and update System Settings.

At long last you have arrived at the desktop.

33

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

If you are lucky you will have no drivers to install, but chances are the next step will be to install them. Check out device manager for unknown devices, likely items are Network Cards, Sound Cards, Printers, Scanners, Graphics Cards, Digital Cameras, plus any other item you have.

THE END

34

98 SE - CD Install on 98 SE - CD Install on Blank Hard Drive

Intri in bios mai intai si te asiguri ca ai setat "First boot device - Floppy disk" Dupa care introduci CD-ul in CD-Rom si discheta in FDD si restartezi...la start-up iti va aparea un meniu...Trebuie sa selectezi "Start with CDROM Support"..dupa care vei avea vei avea "A:\",,acum vei da exact aceste comenzi : Code:
A:\D: D:\dir ( dir fiindca trebuie sa vezi ce fisiere si foldere ai pe CD-ul respectiv , daca este un kit copie genuine vei avea setup.exe in Root , daca nu il vei avea in D:\Win98) Pentru primul caz vei scrie D:\setup.exe iar pentru al doilea vei scrie : D:\cd Win98 D:\Win98\setup.exe

35

Vous aimerez peut-être aussi