Académique Documents
Professionnel Documents
Culture Documents
litronic`
Hydraulic Excavator
Hydraulic Controls
Power distribution ________________ via monoblock control valve with
integrated safety valves
Attachment
Flow summation ____________ to boom and stick Type ______________________________ box-type, combination of resistant steel
Closed-loop circuit __________ for uppercarriage swing drive plates and cast steel components
Servo circuit Hydraulic cylinders ________ Liebherr cylinders with special seal-
Attachment and swing ____ – proportional via joystick levers system, shock absorbed
Travel ____________________________ – proportional via foot pedals or Pivots ____________________________ sealed, low maintenance
removable hand levers Lubrication ____________________ easily accessible centralized lubrication
– speed pre-selection Hydraulic connections ____ pipes and hoses equipped with SAE split-
Additional functions ______________ via foot pedals or joystick toggle flange connections
switch Bucket ____________________________ standard equipped with 20 t lifting eye
Technical Data
2
E
D A
W C
H
K P
Q
L N
U S
Z B
V G
X
E
D A
W C
H
K P
Q
L N
U S
Z B
V G
X
Dimensions
3
Digging envelope
1 with stick 2,10 m
ft m 2 with stick 2,60 m
3 with stick 3,30 m
12 4 with stick 4,10 m
11
35
10 Stick lengths m 2,10 2,60 3,30 4,10
30 9 Max. digging depth m 6,15 6,65 7,35 8,15
Max. reach at
8
25 ground level m 9,90 10,35 11,00 11,80
7 Max. dump height m 7,15 7,35 7,70 8,10
20
Max. teeth height m 10,30 10,50 10,85 11,25
6
5 Digging force SAE kN/t 196/20,0 164/16,7 141/14,4 121/12,3
15 Digging force ISO kN/t 205/20,9 170/17,3 145/14,8 124/12,6
4 Breakout force SAE kN/t 225/22,9 195/19,9 195/19,9 195/19,9
10 3 Breakout force ISO kN/t 245/25,0 215/21,9 215/21,9 215/21,9
2
5
1
0 0
-1
-5
-2
-10 -3
-4 Operating Weight and Ground Pressure
-15
-5 Operating weight includes basic machine with 6,30 m
gooseneck boom, 2,60 m stick and 1,95 m3 bucket.
-20 -6 1
2 Undercarriage adjustable undercarriage
-7
3
-25 Pad width mm 500 600
-8 4
Weight kg 42700 43000
-30 -9
13 12 11 10 9 8 7 6 5 4 3 2 1 0 m Ground pressure kg/cm2 0,90 0,76
40 35 30 25 20 15 10 5 0 ft
Optional: heavy duty counterweight
(Heavy duty counterweight increases the operating weight
by 1380 kg and ground pressure by 0,03 kg/cm2.
Buckets
Cutting width mm 700 8003) 900 1050 1200 1350 1500 1650 1650 18001)
Capacity ISO 7451 m3 0,70 0,60 0,90 1,10 1,30 1,50 1,75 1,95 2,20 2,60
Max. possible material weight t/m3 1,80 1,80 1,80 1,80 1,80 1,80 1,80 1,80 1,50 1,20
Weight with Liebherr teeth Z 20 kg 965 1380 1070 1185 1270 1390 1435 1575 1635 1650
Weight of HD-bucket
with Liebherr teeth Z 202) kg 1040 – 1150 1260 1360 1445 1525 1670 – –
Max. stick length for machine stability per ISO 10567:
with V-undercarriage m 4,10 4,10 4,10 4,10 4,10 4,10 3,30 2,60 2,60 2,60
Note
Optional side cutters with teeth 20 increase cutting width by approx. 140 mm.
Backhoe Attachment
with 6,30 m Gooseneck Boom
4
with stick 2,10 m with stick 2,60 m
Height Radius of load from centerline of machine in m Height Radius of load from centerline of machine in m
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0
10,5 10,5
9,0 9,0
7,5 7,5 4,2# (4,2#)
6,0 8,5# ( 8,5#) 7,7# (7,7#) 6,0 7,2# (7,2#)
4,5 12,4# (12,4#) 9,6# ( 9,6#) 8,2# (8,2#) 4,5 11,3# (11,3#) 9,0# ( 9,0#) 7,8# (7,8#)
3,0 15,3# (15,3#) 10,9# (10,9#) 8,5 (8,8#) 3,0 14,4# (14,4#) 10,4# (10,4#) 8,5# (8,5#) 6,3# (6,3#)
1,5 17,0# (17,0#) 11,2 (12,0#) 8,1 (9,4#) 1,5 16,6# (16,6#) 11,4 (11,7#) 8,2 (9,2#) 6,2 (7,3#)
0 16,7 (17,1#) 10,9 (12,4#) 7,9 (9,6#) 0 16,9 (17,2#) 11,0 (12,3#) 7,9 (9,6#) 6,1 (6,4#)
– 1,5 16,1# (16,1#) 10,8 (12,1#) 7,9 (9,3#) – 1,5 16,7# (16,7#) 10,8 (12,3#) 7,8 (9,5#)
– 3,0 14,3# (14,3#) 10,9# (10,9#) – 3,0 15,2# (15,2#) 10,8 (11,4#) 7,9 (8,6#)
– 4,5 10,9# (10,9#) – 4,5 12,3# (12,3#) 9,1# ( 9,1#)
– 6,0 – 6,0
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0
10,5 10,5
9,0 9,0
7,5 5,1# (5,1#) 7,5 2,8# (2,8#)
6,0 6,4# (6,4#) 3,5# (3,5#) 6,0 4,3# (4,3#)
4,5 8,0# ( 8,0#) 7,1# (7,1#) 5,5# (5,5#) 4,5 6,3# (6,3#) 5,4# (5,4#)
3,0 12,8# (12,8#) 9,5# ( 9,5#) 7,9# (7,9#) 6,4 (6,9#) 3,0 11,0# (11,0#) 8,5# ( 8,5#) 7,2# (7,2#) 6,4# (6,4#) 3,0# (3,0#)
1,5 15,6# (15,6#) 11,0# (11,0#) 8,2 (8,7#) 6,2 (7,3#) 1,5 14,2# (14,2#) 10,2# (10,2#) 8,1# (8,1#) 6,2 (6,9#) 3,4# (3,4#)
0 16,9# (16,9#) 11,0 (12,0#) 7,9 (9,3#) 6,0 (7,6#) 0 16,3# (16,3#) 11,1 (11,4#) 8,0 (8,9#) 6,0 (7,3#) 2,8# (2,8#)
– 1,5 16,7 (17,0#) 10,7 (12,3#) 7,7 (9,4#) 5,9 (7,2#) – 1,5 16,7 (17,0#) 10,7 (12,1#) 7,7 (9,3#) 5,9 (7,5#)
– 3,0 16,0# (16,0#) 10,7 (11,8#) 7,7 (9,0#) – 3,0 16,5 (16,6#) 10,6 (12,0#) 7,6 (9,2#) 5,8 (7,2#)
– 4,5 13,8# (13,8#) 10,2# (10,2#) – 4,5 15,1# (15,1#) 10,6 (11,1#) 7,6 (8,4#)
– 6,0 9,6# ( 9,6#) – 6,0 12,1# (12,1#) 8,8# ( 8,8#)
The lift capacities are stated in metric tonnes (t) on the backhoe bucket’s load hook, and can be lifted 360h on firm, level
supporting surface.
Values quoted in brackets are valid for the undercarriage when in longitudinal position.
Capacities are valid for 600 mm wide triple grouser pads.
Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated
via #).
Maximum load for the backhoe bucket’s lifting eye is 20 t.
Without bucket (1,10 m3), the lift capacities will increase by 1185 kg, without bucket cylinder, link and lever they increase
by an additional 490 kg.
Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and over-
load warning device according to European Standard, EN 474-5.
Lift Capacities
with 6,30 m Gooseneck Boom
5
Digging envelope
ft m 1 with stick 2,10 m
2 with stick 2,60 m
50 15 3 with stick 3,30 m
4 with stick 4,10 m
14
45
13
40 12
Stick lengths m 2,10 2,60 3,30 4,10
Max. digging depth m 6,55 7,05 7,75 8,50
11 Max. reach at
35
10 ground level m 10,90 11,40 12,05 12,80
30 9 Max. dump height m 9,45 9,85 10,40 11,05
Max. teeth height m 12,70 13,10 13,70 14,35
8
25
7 Digging force SAE kN/t 196/20,0 164/16,7 141/14,4 121/12,3
20
Digging force ISO kN/t 205/20,9 170/17,3 145/14,8 124/12,6
6
Breakout force SAE kN/t 225/22,9 195/19,9 195/19,9 195/19,9
5 Breakout force ISO kN/t 245/25,0 215/21,9 215/21,9 215/21,9
15
4
10 3
2
5
1
0 0
-1
-5
-2 Operating Weight and Ground Pressure
-10 -3 Operating weight includes basic machine with 4,50 m
hydraulically adjustable boom, 2,60 m stick and 1,95 m3
-4
-15 bucket.
-5
-6 Undercarriage adjustable undercarriage
-20 1
2 Pad width mm 500 600
-7
-25 3 Weight kg 44950 45450
-8
4 Ground pressure kg/cm2 0,94 0,79
-30 -9
14 13 12 11 10 9 8 7 6 5 4 3 2 1 0m
Buckets
Cutting width mm 700 8003) 900 1050 1200 1350 1500 1650 1650 18001)
Capacity ISO 7451 m3 0,70 0,60 0,90 1,10 1,30 1,50 1,75 1,95 2,20 2,60
Max. possible material weight t/m3 1,80 1,80 1,80 1,80 1,80 1,80 1,80 1,80 1,50 1,20
Weight with Liebherr teeth Z 20 kg 965 1380 1070 1185 1270 1390 1435 1575 1635 1650
Weight of HD-bucket
with Liebherr teeth Z 202) kg 1040 – 1150 1260 1360 1445 1525 1670 – –
Max. stick length for machine stability per ISO 10567:
with V-undercarriage m 4,10 4,10 4,10 4,10 4,10 4,10 3,30 2,60 2,60 2,60
Note
Optional side cutters with teeth 20 increase cutting width by approx. 140 mm.
Backhoe Attachment
with 4,50 m Hydr. Adjustable Boom
6
with stick 2,10 m with stick 2,60 m
Height Radius of load from centerline of machine in m Height Radius of load from centerline of machine in m
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0
10,5 9,3# ( 9,3#) 10,5 7,6# ( 7,6#)
9,0 10,6# (10,6#) 9,8# ( 9,8#) 9,0 8,2# ( 8,2#) 7,8# ( 7,8#) 4,9# (4,9#)
7,5 11,7# (11,7#) 10,5# (10,5#) 8,7# (8,7#) 7,5 9,0# ( 9,0#) 9,1# ( 9,1#) 8,0# (8,0#)
6,0 14,6# (14,6#) 10,9# (10,9#) 8,7 (8,8#) 6,2 (7,3#) 6,0 13,4# (13,4#) 10,6# (10,6#) 8,6# (8,6#) 6,4 (6,9#)
4,5 15,8# (15,8#) 11,4# (11,4#) 8,4 (8,9#) 6,2 (7,3#) 4,5 15,5# (15,5#) 11,2# (11,2#) 8,5 (8,8#) 6,3 (7,2#)
3,0 15,6# (15,6#) 11,1 (11,5#) 8,3# (8,9#) 6,1 (7,2#) 3,0 15,9# (15,9#) 11,2# (11,6#) 8,3# (8,9#) 6,3 (7,2#)
1,5 15,8# (15,8#) 11,0# (11,4#) 8,3# (8,8#) 5,9 (7,2#) 1,5 15,9# (15,9#) 11,0 (11,4#) 8,2# (8,8#) 6,1 (7,1#)
0 16,1# (16,1#) 11,2 (11,5#) 8,1 (9,0#) 5,7 (6,8#) 0 16,0# (16,0#) 11,1# (11,4#) 8,2 (8,8#) 5,8 (7,1#)
– 1,5 16,6# (16,6#) 11,0 (11,9#) 7,7 (9,0#) 5,0# (5,0#) – 1,5 16,4# (16,4#) 11,1 (11,7#) 7,8 (9,1#) 5,6 (6,3#)
– 3,0 16,3# (16,3#) 10,8 (11,3#) 6,7# (6,7#) – 3,0 16,6# (16,6#) 11,0 (11,9#) 7,5 (8,0#)
– 4,5 12,5# (12,5#) 6,4# ( 6,4#) – 4,5 14,8# (14,8#) 9,0# ( 9,0#) 3,2# (3,2#)
– 6,0 – 6,0
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0 3,5# ( 3,5#)
10,5 5,5# ( 5,5#) 10,5 5,0# ( 5,0#) 3,9# (3,9#)
9,0 6,4# ( 6,4#) 5,5# (5,5#) 9,0 5,1# ( 5,1#) 4,9# (4,9#) 3,6# (3,6#)
7,5 7,0# ( 7,0#) 6,7# (6,7#) 4,9# (4,9#) 7,5 5,3# ( 5,3#) 5,4# (5,4#) 4,8# (4,8#)
6,0 8,4# ( 8,4#) 8,5# ( 8,5#) 8,0# (8,0#) 6,4# (6,6#) 6,0 6,1# ( 6,1#) 6,2# (6,2#) 5,7# (5,7#) 4,0# (4,0#)
4,5 14,6# (14,6#) 10,7# (10,7#) 8,5 (8,5#) 6,4 (7,0#) 4,4# (4,4#) 4,5 9,8# ( 9,8#) 8,7# ( 8,7#) 7,9# (7,9#) 6,4 (6,8#) 4,8 (5,1#)
3,0 15,9# (15,9#) 11,2# (11,3#) 8,2# (8,7#) 6,3 (7,0#) 4,6 (5,7#) 3,0 15,2# (15,2#) 10,9# (10,9#) 8,2 (8,5#) 6,3# (6,9#) 4,7 (5,7#)
1,5 15,8# (15,8#) 10,9# (11,3#) 8,1 (8,7#) 6,2 (7,0#) 4,4 (5,5#) 1,5 15,8# (15,8#) 11,0 (11,3#) 8,0 (8,7#) 6,2 (6,9#) 4,6 (5,6#)
0 15,8# (15,8#) 10,9# (11,3#) 8,1 (8,6#) 6,0 (7,0#) 4,3 (5,1#) 0 15,6# (15,6#) 10,8# (11,2#) 8,0 (8,6#) 6,1 (6,8#) 4,4 (5,6#)
– 1,5 16,1# (16,1#) 11,1 (11,4#) 8,0 (8,8#) 5,7 (6,9#) – 1,5 15,8# (15,8#) 10,9 (11,2#) 8,0 (8,6#) 5,8 (6,9#) 4,3 (5,0#)
– 3,0 16,5# (16,5#) 10,8 (11,8#) 7,6 (8,8#) 5,4# (5,4#) – 3,0 16,2# (16,2#) 10,8 (11,5#) 7,8 (8,9#) 5,6 (6,6#) 3,2# (3,2#)
– 4,5 15,9# (15,9#) 10,7 (10,8#) 6,3# (6,3#) – 4,5 16,3# (16,3#) 10,7 (11,7#) 7,4 (8,2#) 4,4# (4,4#)
– 6,0 10,3# (10,3#) 4,8# ( 4,8#) – 6,0 14,5# (14,5#) 8,9# ( 8,9#) 4,0# (4,0#)
The lift capacities are stated in metric tonnes (t) on the backhoe bucket’s load hook, and can be lifted 360h on firm, level
supporting surface.
Values quoted in brackets are valid for the undercarriage when in longitudinal position.
Capacities are valid for 600 mm wide triple grouser pads with adjusting cylinder in optimal position.
Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated
via #).
Maximum load for the backhoe bucket’s lifting eye is 20 t.
Without bucket (1,10 m3), the lift capacities will increase by 1185 kg, without bucket cylinder, link and lever they increase
by an additional 490 kg.
Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and over-
load warning device according to European Standard, EN 474-5.
Lift Capacities
with 4,50 m Hydr. Adjustable Boom
7
Digging envelope
1 with stick 2,10 m, main boom retracted 2 holes
ft m 2 with stick 2,10 m, main boom retracted 1 hole
3 with stick 2,10 m
40 12 4 with stick 2,60 m
5 with stick 3,30 m
11
35 6 with stick 4,10 m
10
30 9
Stick lengths m 2,10 2,60 3,30 4,10
8 Max. digging depth m 6,15 6,65 7,35 8,15
25
7 Max. reach at
ground level m 9,85 10,30 10,93 11,70
20 6 Max. dump height m 7,00 7,20 7,50 7,90
5 Max. teeth height m 10,15 10,30 10,65 11,00
15
4 Digging force SAE kN/t 196/20,0 164/16,7 141/14,4 121/12,3
10 3 Digging force ISO kN/t 205/20,9 170/17,3 145/14,8 124/12,6
Breakout force SAE kN/t 225/22,9 195/19,9 195/19,9 195/19,9
2 Breakout force ISO kN/t 245/25,0 215/21,9 215/21,9 215/21,9
5
1
0 0
-1
-5
-2
-10 -3
-4
-15 1
-5
2
-20 -6 3
4 Operating Weight and Ground Pressure
-7 5
-25 Operating weight includes basic machine with 4,50 m
-8 6 mechanically adjustable boom, 2,60 m stick and 1,95 m3
-9 bucket.
-30
13 12 11 10 9 8 7 6 5 4 3 2 1 0m
Undercarriage adjustable undercarriage
40 35 30 25 20 15 10 5 0 ft Pad width mm 500 600
Weight kg 43500 44000
Ground pressure kg/cm2 0,91 0,77
Buckets
Cutting width mm 700 8003) 900 1050 1200 1350 1500 1650 1650 18001)
Capacity ISO 7451 m3 0,70 0,60 0,90 1,10 1,30 1,50 1,75 1,95 2,20 2,60
Max. possible material weight t/m3 1,80 1,80 1,80 1,80 1,80 1,80 1,80 1,80 1,50 1,20
Weight with Liebherr teeth Z 20 kg 965 1380 1070 1185 1270 1390 1435 1575 1635 1650
Weight of HD-bucket
with Liebherr teeth Z 202) kg 1040 – 1150 1260 1360 1445 1525 1670 – –
Max, stick length for machine stability per ISO 10567:
with V-undercarriage m 4,10 4,10 4,10 4,10 4,10 4,10 3,30 2,60 2,60 2,60
Note
Optional side cutters with teeth 20 increase cutting width by approx. 140 mm.
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0
10,5 10,5
9,0 7,7# ( 7,7#) 9,0 6,7# ( 6,7#)
7,5 9,9# ( 9,9#) 6,9# (6,9#) 7,5 8,4# ( 8,4#) 6,4# (6,4#)
6,0 13,2# (13,2#) 10,4# (10,4#) 8,7# (8,7#) 6,0 11,0# (11,0#) 9,9# ( 9,9#) 8,4# (8,4#)
4,5 15,2# (15,2#) 11,2# (11,2#) 8,6 (9,1#) 6,3 (6,9#) 4,5 14,4# (14,4#) 10,8# (10,8#) 8,7 (8,8#) 6,4 (6,9#)
3,0 16,7# (16,7#) 11,3 (11,9#) 8,2 (9,4#) 6,1 (7,7#) 3,0 16,4# (16,4#) 11,6 (11,7#) 8,3 (9,2#) 6,2 (7,6#)
1,5 11,1# (11,1#) 10,7 (12,1#) 7,8 (9,4#) 6,0 (7,5#) 1,5 15,1# (15,1#) 10,9 (12,1#) 7,9 (9,4#) 6,0 (7,5#)
0 14,5# (14,5#) 10,4 (11,5#) 7,6 (9,0#) 5,9 (6,9#) 0 15,6# (15,6#) 10,5 (11,8#) 7,6 (9,2#) 5,8 (7,2#)
– 1,5 12,3# (12,3#) 10,2# (10,2#) 7,5 (8,0#) – 1,5 13,6# (13,6#) 10,4 (10,8#) 7,5 (8,4#) 5,8 (6,3#)
– 3,0 9,3# ( 9,3#) 8,0# ( 8,0#) 6,0# (6,0#) – 3,0 10,8# (10,8#) 8,8# ( 8,8#) 6,8# (6,8#)
– 4,5 – 4,5 5,7# ( 5,7#)
– 6,0 – 6,0
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0
10,5 3,8# ( 3,8#) 10,5
9,0 6,0# ( 6,0#) 4,0# (4,0#) 9,0 4,4# (4,4#)
7,5 6,7# ( 6,7#) 6,0# (6,0#) 7,5 5,1# (5,1#) 4,0# (4,0#)
6,0 7,8# ( 7,8#) 7,2# (7,2#) 5,2# (5,2#) 6,0 5,7# ( 5,7#) 5,7# (5,7#) 5,0# (5,0#) 2,1# (2,1#)
4,5 13,2# (13,2#) 10,1# (10,1#) 8,3# (8,3#) 6,4 (6,8#) 4,5 7,5# ( 7,5#) 7,5# ( 7,5#) 7,0# (7,0#) 6,0# (6,0#) 3,6# (3,6#)
3,0 15,5# (15,5#) 11,2# (11,2#) 8,3 (8,8#) 6,2 (7,3#) 3,0 14,2# (14,2#) 10,5# (10,5#) 8,4# (8,4#) 6,3 (7,0#) 4,6# (4,6#)
1,5 16,7# (16,7#) 11,0 (11,9#) 7,9 (9,2#) 6,0 (7,4#) 1,5 16,1# (16,1#) 11,3 (11,5#) 8,0 (8,9#) 6,0 (7,3#) 4,6 (5,2#)
0 16,2 (16,3#) 10,5 (11,9#) 7,6 (9,2#) 5,8 (7,3#) 0 16,5 (16,6#) 10,7 (11,9#) 7,6 (9,1#) 5,8 (7,3#) 4,5 (5,2#)
– 1,5 14,8# (14,8#) 10,3 (11,2#) 7,4 (8,7#) 5,7 (6,7#) – 1,5 15,8# (15,8#) 10,3 (11,6#) 7,4 (8,9#) 5,6 (7,0#) 3,8# (3,8#)
– 3,0 12,4# (12,4#) 9,7# ( 9,7#) 7,4 (7,5#) 5,3# (5,3#) – 3,0 13,9# (13,9#) 10,1 (10,5#) 7,3 (8,1#) 5,6 (6,2#)
– 4,5 8,9# ( 8,9#) 7,2# ( 7,2#) 5,2# (5,2#) – 4,5 11,0# (11,0#) 8,5# ( 8,5#) 6,5# (6,5#)
– 6,0 – 6,0 6,8# ( 6,8#) 5,3# ( 5,3#) 3,4# (3,4#)
The lift capacities are stated in metric tonnes (t) on the backhoe bucket’s load hook, and can be lifted 360h on firm, level
supporting surface.
Values quoted in brackets are valid for the undercarriage when in longitudinal position.
Capacities are valid for 600 mm wide triple grouser pads.
Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated
via #).
Maximum load for the backhoe bucket’s lifting eye is 20 t.
Without bucket (1,10 m3), the lift capacities will increase by 1185 kg, without bucket cylinder, link and lever they increase
by an additional 490 kg.
Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and over-
load warning device according to European Standard, EN 474-5.
40 35 30 25 20 15 10 5 0 ft
Optional: heavy duty counterweight
(Heavy duty counterweight increases the operating weight
by 1380 kg and ground pressure by 0,03 kg/cm2)
Buckets
Cutting width mm 700 8003) 900 1050 1200 1350 1500 1650 1650 18001)
Capacity ISO 7451 m3 0,70 0,60 0,90 1,10 1,30 1,50 1,75 1,95 2,20 2,60
Max. possible material weight t/m3 1,80 1,80 1,80 1,80 1,80 1,80 1,80 1,80 1,50 1,20
Weight with Liebherr teeth Z 20 kg 965 1380 1070 1185 1270 1390 1435 1575 1635 1650
Weight of HD-bucket
with Liebherr teeth Z 202) kg 1040 – 1150 1260 1360 1445 1525 1670 – –
Max. stick length for machine stability per ISO 10567:
with V-undercarriage m 4,10 4,10 4,10 4,10 4,10 4,10 3,30 2,60 2,60 2,60
Note
Optional side cutters with teeth 20 increase cutting width by approx. 140 mm.
Backhoe Attachment
with 6,80 m Straight Gooseneck Boom
10
with stick 2,10 m with stick 2,60 m
Height Radius of load from centerline of machine in m Height Radius of load from centerline of machine in m
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0
10,5 10,5
9,0 9,0# ( 9,0#) 9,0 7,4# ( 7,4#)
7,5 9,8# ( 9,8#) 8,4# (8,4#) 7,5 8,5# ( 8,5#) 7,2# (7,2#)
6,0 13,2# (13,2#) 10,4# (10,4#) 8,8# (8,8#) 6,0 10,6# (10,6#) 9,9# ( 9,9#) 8,4# (8,4#) 5,3# (5,3#)
4,5 15,3# (15,3#) 11,3# (11,3#) 8,5 (9,1#) 6,3 (7,7#) 4,5 14,6# (14,6#) 10,9# (10,9#) 8,6 (8,9#) 6,4 (7,5#)
3,0 11,3 (12,1#) 8,2 (9,5#) 6,2 (7,8#) 3,0 16,6# (16,6#) 11,5 (11,8#) 8,2 (9,3#) 6,2 (7,7#)
1,5 10,7 (12,3#) 7,8 (9,5#) 6,0 (7,6#) 1,5 12,1# (12,1#) 10,9 (12,3#) 7,9 (9,5#) 6,0 (7,7#)
0 11,9# (11,9#) 10,5 (11,7#) 7,6 (9,2#) 5,9 (7,1#) 0 13,2# (13,2#) 10,6 (12,0#) 7,7 (9,3#) 5,9 (7,4#)
– 1,5 12,5# (12,5#) 10,4# (10,4#) 7,6 (8,2#) – 1,5 13,9# (13,9#) 10,5 (11,0#) 7,6 (8,6#) 5,9 (6,5#)
– 3,0 9,6# ( 9,6#) 8,2# ( 8,2#) 6,3# (6,3#) – 3,0 11,1# (11,1#) 9,1# ( 9,1#) 7,0# (7,0#)
– 4,5 – 4,5 7,3# ( 7,3#) 6,1# ( 6,1#)
– 6,0 – 6,0
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0
10,5 5,0# ( 5,0#) 10,5 3,3# (3,3#)
9,0 5,0# (5,0#) 9,0 4,8# (4,8#) 2,7# (2,7#)
7,5 6,6# ( 6,6#) 6,3# (6,3#) 3,9# (3,9#) 7,5 5,2# (5,2#) 4,5# (4,5#)
6,0 7,5# ( 7,5#) 7,3# (7,3#) 5,9# (5,9#) 6,0 5,5# ( 5,5#) 5,7# (5,7#) 5,3# (5,3#) 3,1# (3,1#)
4,5 13,2# (13,2#) 10,1# (10,1#) 8,4# (8,4#) 6,4 (7,2#) 4,5 7,0# ( 7,0#) 7,2# ( 7,2#) 6,9# (6,9#) 6,2# (6,2#) 4,3# (4,3#)
3,0 15,7# (15,7#) 11,3# (11,3#) 8,3 (8,9#) 6,2 (7,4#) 4,0# (4,0#) 3,0 14,3# (14,3#) 10,5# (10,5#) 8,5# (8,5#) 6,3 (7,1#) 4,8 (5,2#)
1,5 16,3# (16,3#) 11,0 (12,0#) 7,9 (9,3#) 6,0 (7,5#) 4,5# (4,5#) 1,5 16,4# (16,4#) 11,3 (11,6#) 8,0 (9,0#) 6,0 (7,4#) 4,7 (5,9#)
0 14,0# (14,0#) 10,6 (12,1#) 7,6 (9,3#) 5,8 (7,4#) 0 15,7# (15,7#) 10,7 (12,1#) 7,7 (9,3#) 5,8 (7,4#) 4,6 (6,0#)
– 1,5 15,1# (15,1#) 10,4 (11,4#) 7,5 (8,9#) 5,7 (6,9#) – 1,5 15,8# (15,8#) 10,3 (11,8#) 7,4 (9,1#) 5,7 (7,2#) 4,5 (5,2#)
– 3,0 12,7# (12,7#) 10,0# (10,0#) 7,5 (7,7#) 5,6# (5,6#) – 3,0 14,2# (14,2#) 10,2 (10,7#) 7,4 (8,3#) 5,6 (6,4#)
– 4,5 9,3# ( 9,3#) 7,5# ( 7,5#) 5,5# (5,5#) – 4,5 11,4# (11,4#) 8,8# ( 8,8#) 6,7# (6,7#) 4,6# (4,6#)
– 6,0 – 6,0 7,3# ( 7,3#) 5,7# ( 5,7#) 3,8# (3,8#)
The lift capacities are stated in metric tonnes (t) on the backhoe bucket’s load hook, and can be lifted 360h on firm, level
supporting surface.
Values quoted in brackets are valid for the undercarriage when in longitudinal position.
Capacities are valid for 600 mm wide triple grouser pads.
Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated
via #).
Maximum load for the backhoe bucket’s lifting eye is 20 t.
Without bucket (1,10 m3), the lift capacities will increase by 1185 kg, without bucket cylinder, link and lever they increase
by an additional 490 kg.
Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and over-
load warning device according to European Standard, EN 474-5.
Lift Capacities
with 6,80 m Straight Gooseneck Boom
11
with stick 2,10 m with stick 2,60 m
Height Radius of load from centerline of machine in m Height Radius of load from centerline of machine in m
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0
10,5 10,5
9,0 9,0
7,5 7,5 4,2# (4,2#)
6,0 8,5# ( 8,5#) 7,7# (7,7#) 6,0 7,2# (7,2#)
4,5 12,4# (12,4#) 9,6# ( 9,6#) 8,2# (8,2#) 4,5 11,3# (11,3#) 9,0# ( 9,0#) 7,8# (7,8#)
3,0 15,3# (15,3#) 10,9# (10,9#) 8,8# (8,8#) 3,0 14,4# (14,4#) 10,4# (10,4#) 8,5# (8,5#) 6,3# (6,3#)
1,5 17,0# (17,0#) 12,0# (12,0#) 8,9 (9,4#) 1,5 16,6# (16,6#) 11,7# (11,7#) 9,0 (9,2#) 6,8 (7,3#)
0 17,1# (17,1#) 11,9 (12,4#) 8,7 (9,6#) 0 17,2# (17,2#) 12,0 (12,3#) 8,7 (9,6#) 6,4# (6,4#)
– 1,5 16,1# (16,1#) 11,8 (12,1#) 8,6 (9,3#) – 1,5 16,7# (16,7#) 11,8 (12,3#) 8,6 (9,5#)
– 3,0 14,3# (14,3#) 10,9# (10,9#) – 3,0 15,2# (15,2#) 11,4# (11,4#) 8,6# (8,6#)
– 4,5 10,9# (10,9#) – 4,5 12,3# (12,3#) 9,1# ( 9,1#)
– 6,0 – 6,0
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0
10,5 10,5
9,0 9,0
7,5 5,1# (5,1#) 7,5 2,8# (2,8#)
6,0 6,4# (6,4#) 3,5# (3,5#) 6,0 4,3# (4,3#)
4,5 8,0# ( 8,0#) 7,1# (7,1#) 5,5# (5,5#) 4,5 6,3# (6,3#) 5,4# (5,4#)
3,0 12,8# (12,8#) 9,5# ( 9,5#) 7,9# (7,9#) 6,9# (6,9#) 3,0 11,0# (11,0#) 8,5# ( 8,5#) 7,2# (7,2#) 6,4# (6,4#) 3,0# (3,0#)
1,5 15,6# (15,6#) 11,0# (11,0#) 8,7# (8,7#) 6,8 (7,3#) 1,5 14,2# (14,2#) 10,2# (10,2#) 8,1# (8,1#) 6,9 (6,9#) 3,4# (3,4#)
0 16,9# (16,9#) 12,0# (12,0#) 8,7 (9,3#) 6,6 (7,6#) 0 16,3# (16,3#) 11,4# (11,4#) 8,7 (8,9#) 6,6 (7,3#) 2,8# (2,8#)
– 1,5 17,0# (17,0#) 11,7 (12,3#) 8,5 (9,4#) 6,5 (7,2#) – 1,5 17,0# (17,0#) 11,8 (12,1#) 8,5 (9,3#) 6,5 (7,5#)
– 3,0 16,0# (16,0#) 11,7 (11,8#) 8,5 (9,0#) – 3,0 16,6# (16,6#) 11,6 (12,0#) 8,4 (9,2#) 6,4 (7,2#)
– 4,5 13,8# (13,8#) 10,2# (10,2#) – 4,5 15,1# (15,1#) 11,1# (11,1#) 8,4# (8,4#)
– 6,0 9,6# ( 9,6#) – 6,0 12,1# (12,1#) 8,8# ( 8,8#)
The lift capacities are stated in metric tonnes (t) on the backhoe bucket’s load hook, and can be lifted 360h on firm, level
supporting surface.
Values quoted in brackets are valid for the undercarriage when in longitudinal position.
Capacities are valid for 600 mm wide triple grouser pads.
Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated
via #).
Maximum load for the backhoe bucket’s lifting eye is 20 t.
Without bucket (1,10 m3), the lift capacities will increase by 1185 kg, without bucket cylinder, link and lever they increase
by an additional 490 kg.
Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and over-
load warning device according to European Standard, EN 474-5.
Lift Capacities
with 6,30 m Gooseneck Boom
and Heavy Counterweight
with stick 2,10 m with stick 2,60 m
Height Radius of load from centerline of machine in m Height Radius of load from centerline of machine in m
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0
10,5 9,3# ( 9,3#) 10,5 7,6# ( 7,6#)
9,0 10,6# (10,6#) 9,8# ( 9,8#) 9,0 8,2# ( 8,2#) 7,8# ( 7,8#) 4,9# (4,9#)
7,5 11,7# (11,7#) 10,5# (10,5#) 8,7# (8,7#) 7,5 9,0# ( 9,0#) 9,1# ( 9,1#) 8,0# (8,0#)
6,0 14,6# (14,6#) 10,9# (10,9#) 8,8# (8,8#) 6,8 (7,3#) 6,0 13,4# (13,4#) 10,6# (10,6#) 8,6# (8,6#) 6,9# (6,9#)
4,5 15,8# (15,8#) 11,4# (11,4#) 8,9 (8,9#) 6,8 (7,3#) 4,5 15,5# (15,5#) 11,2# (11,2#) 8,8# (8,8#) 6,9# (7,2#)
3,0 15,6# (15,6#) 11,5# (11,5#) 8,7# (8,9#) 6,7 (7,2#) 3,0 15,9# (15,9#) 11,6# (11,6#) 8,7 (8,9#) 6,8 (7,2#)
1,5 15,8# (15,8#) 11,4# (11,4#) 8,7# (8,8#) 6,5 (7,2#) 1,5 15,9# (15,9#) 11,4# (11,4#) 8,6# (8,8#) 6,7 (7,1#)
0 16,1# (16,1#) 11,5# (11,5#) 8,9 (9,0#) 6,3 (6,8#) 0 16,0# (16,0#) 11,4# (11,4#) 8,7# (8,8#) 6,4 (7,1#)
– 1,5 16,6# (16,6#) 11,9# (11,9#) 8,5 (9,0#) 5,0# (5,0#) – 1,5 16,4# (16,4#) 11,7# (11,7#) 8,6 (9,1#) 6,2 (6,3#)
– 3,0 16,3# (16,3#) 11,3# (11,3#) 6,7# (6,7#) – 3,0 16,6# (16,6#) 11,9# (11,9#) 8,0# (8,0#)
– 4,5 12,5# (12,5#) 6,4# ( 6,4#) – 4,5 14,8# (14,8#) 9,0# ( 9,0#) 3,2# (3,2#)
– 6,0 – 6,0
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0 3,5# ( 3,5#)
10,5 5,5# ( 5,5#) 10,5 5,0# ( 5,0#) 3,9# (3,9#)
9,0 6,4# ( 6,4#) 5,5# (5,5#) 9,0 5,1# ( 5,1#) 4,9# (4,9#) 3,6# (3,6#)
7,5 7,0# ( 7,0#) 6,7# (6,7#) 4,9# (4,9#) 7,5 5,3# ( 5,3#) 5,4# (5,4#) 4,8# (4,8#)
6,0 8,4# ( 8,4#) 8,5# ( 8,5#) 8,0# (8,0#) 6,6# (6,6#) 6,0 6,1# ( 6,1#) 6,2# (6,2#) 5,7# (5,7#) 4,0# (4,0#)
4,5 14,6# (14,6#) 10,7# (10,7#) 8,5# (8,5#) 6,9 (7,0#) 4,4# (4,4#) 4,5 9,8# ( 9,8#) 8,7# ( 8,7#) 7,9# (7,9#) 6,8# (6,8#) 5,1# (5,1#)
3,0 15,9# (15,9#) 11,3# (11,3#) 8,7 (8,7#) 6,7# (7,0#) 5,0 (5,7#) 3,0 15,2# (15,2#) 10,9# (10,9#) 8,5# (8,5#) 6,7 (6,9#) 5,2 (5,7#)
1,5 15,8# (15,8#) 11,3# (11,3#) 8,5 (8,7#) 6,7# (7,0#) 4,9 (5,5#) 1,5 15,8# (15,8#) 11,3# (11,3#) 8,5 (8,7#) 6,6 (6,9#) 5,1 (5,6#)
0 15,8# (15,8#) 11,3# (11,3#) 8,5# (8,6#) 6,5 (7,0#) 4,8 (5,1#) 0 15,6# (15,6#) 11,2# (11,2#) 8,4 (8,6#) 6,6# (6,8#) 4,9 (5,6#)
– 1,5 16,1# (16,1#) 11,4# (11,4#) 8,7 (8,8#) 6,3 (6,9#) – 1,5 15,8# (15,8#) 11,2# (11,2#) 8,5# (8,6#) 6,4 (6,9#) 4,8 (5,0#)
– 3,0 16,5# (16,5#) 11,8# (11,8#) 8,3 (8,8#) 5,4# (5,4#) – 3,0 16,2# (16,2#) 11,5# (11,5#) 8,5 (8,9#) 6,2 (6,6#) 3,2# (3,2#)
– 4,5 15,9# (15,9#) 10,8# (10,8#) 6,3# (6,3#) – 4,5 16,3# (16,3#) 11,7# (11,7#) 8,2 (8,2#) 4,4# (4,4#)
– 6,0 10,3# (10,3#) 4,8# ( 4,8#) – 6,0 14,5# (14,5#) 8,9# ( 8,9#) 4,0# (4,0#)
The lift capacities are stated in metric tonnes (t) on the backhoe bucket’s load hook, and can be lifted 360h on firm, level
supporting surface.
Values quoted in brackets are valid for the undercarriage when in longitudinal position.
Capacities are valid for 600 mm wide triple grouser pads with adjusting cylinder in optimal position.
Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated
via #).
Maximum load for the backhoe bucket’s lifting eye is 20 t.
Without bucket (1,10 m3), the lift capacities will increase by 1185 kg, without bucket cylinder, link and lever they increase
by an additional 490 kg.
Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and over-
load warning device according to European Standard, EN 474-5.
Lift Capacities
with 4,50 m Hydr. Adjustable Boom
and Heavy Counterweight 13
with stick 2,10 m with stick 2,60 m
Height Radius of load from centerline of machine in m Height Radius of load from centerline of machine in m
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0
10,5 10,5
9,0 9,0# ( 9,0#) 9,0 7,4# ( 7,4#)
7,5 9,8# ( 9,8#) 8,4# (8,4#) 7,5 8,5# ( 8,5#) 7,2# (7,2#)
6,0 13,2# (13,2#) 10,4# (10,4#) 8,8# (8,8#) 6,0 10,6# (10,6#) 9,9# ( 9,9#) 8,4# (8,4#) 5,3# (5,3#)
4,5 15,3# (15,3#) 11,3# (11,3#) 9,1# (9,1#) 6,9 (7,7#) 4,5 14,6# (14,6#) 10,9# (10,9#) 8,9# (8,9#) 7,0 (7,5#)
3,0 12,1# (12,1#) 8,9 (9,5#) 6,8 (7,8#) 3,0 16,6# (16,6#) 11,8# (11,8#) 9,0 (9,3#) 6,8 (7,7#)
1,5 11,8 (12,3#) 8,6 (9,5#) 6,6 (7,6#) 1,5 12,1# (12,1#) 11,9 (12,3#) 8,7 (9,5#) 6,6 (7,7#)
0 11,9# (11,9#) 11,5 (11,7#) 8,4 (9,2#) 6,5 (7,1#) 0 13,2# (13,2#) 11,6 (12,0#) 8,4 (9,3#) 6,5 (7,4#)
– 1,5 12,5# (12,5#) 10,4# (10,4#) 8,2# (8,2#) – 1,5 13,9# (13,9#) 11,0# (11,0#) 8,3 (8,6#) 6,5 (6,5#)
– 3,0 9,6# ( 9,6#) 8,2# ( 8,2#) 6,3# (6,3#) – 3,0 11,1# (11,1#) 9,1# ( 9,1#) 7,0# (7,0#)
– 4,5 – 4,5 7,3# ( 7,3#) 6,1# ( 6,1#)
– 6,0 – 6,0
in m 4,5 6,0 7,5 9,0 10,5 in m 4,5 6,0 7,5 9,0 10,5
12,0 12,0
10,5 5,0# ( 5,0#) 10,5 3,3# (3,3#)
9,0 5,0# (5,0#) 9,0 4,8# (4,8#) 2,7# (2,7#)
7,5 6,6# ( 6,6#) 6,3# (6,3#) 3,9# (3,9#) 7,5 5,2# (5,2#) 4,5# (4,5#)
6,0 7,5# ( 7,5#) 7,3# (7,3#) 5,9# (5,9#) 6,0 5,5# ( 5,5#) 5,7# (5,7#) 5,3# (5,3#) 3,1# (3,1#)
4,5 13,2# (13,2#) 10,1# (10,1#) 8,4# (8,4#) 7,0 (7,2#) 4,5 7,0# ( 7,0#) 7,2# ( 7,2#) 6,9# (6,9#) 6,2# (6,2#) 4,3# (4,3#)
3,0 15,7# (15,7#) 11,3# (11,3#) 8,9# (8,9#) 6,8 (7,4#) 4,0# (4,0#) 3,0 14,3# (14,3#) 10,5# (10,5#) 8,5# (8,5#) 6,9 (7,1#) 5,2# (5,2#)
1,5 16,3# (16,3#) 12,0 (12,0#) 8,7 (9,3#) 6,6 (7,5#) 4,5# (4,5#) 1,5 16,4# (16,4#) 11,6# (11,6#) 8,8 (9,0#) 6,6 (7,4#) 5,2 (5,9#)
0 14,0# (14,0#) 11,6 (12,1#) 8,4 (9,3#) 6,4 (7,4#) 0 15,7# (15,7#) 11,7 (12,1#) 8,4 (9,3#) 6,4 (7,4#) 5,1 (6,0#)
– 1,5 15,1# (15,1#) 11,4 (11,4#) 8,2 (8,9#) 6,3 (6,9#) – 1,5 15,8# (15,8#) 11,4 (11,8#) 8,2 (9,1#) 6,3 (7,2#) 5,0 (5,2#)
– 3,0 12,7# (12,7#) 10,0# (10,0#) 7,7# (7,7#) 5,6# (5,6#) – 3,0 14,2# (14,2#) 10,7# (10,7#) 8,1 (8,3#) 6,2 (6,4#)
– 4,5 9,3# ( 9,3#) 7,5# ( 7,5#) 5,5# (5,5#) – 4,5 11,4# (11,4#) 8,8# ( 8,8#) 6,7# (6,7#) 4,6# (4,6#)
– 6,0 – 6,0 7,3# ( 7,3#) 5,7# ( 5,7#) 3,8# (3,8#)
The lift capacities are stated in metric tonnes (t) on the backhoe bucket’s load hook, and can be lifted 360h on firm, level
supporting surface.
Values quoted in brackets are valid for the undercarriage when in longitudinal position.
Capacities are valid for 600 mm wide triple grouser pads.
Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated
via #).
Maximum load for the backhoe bucket’s lifting eye is 20 t.
Without bucket (1,10 m3), the lift capacities will increase by 1185 kg, without bucket cylinder, link and lever they increase
by an additional 490 kg.
Lifting capacity of the excavator is limited by machine stability, hydraulic capacity and maximum permissible load of the
load hook.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and over-
load warning device according to European Standard, EN 474-5.
Lift Capacities
with 6,80 m Straight Gooseneck Boom
and Heavy Counterweight
Standard Equipment Optional Equipment
Undercarriage
x Two-speed travel x One additional track guide at each track frame
x Life time lubricated track rollers x Sprocket with dirt ejector
x Idler protection
x 3 Track guides at each track frame
x Tracks sealed and greased
Uppercarriage
x Engine hood with lift help x Electric fuel tank filler pump
x Lockable tool box x Foot pedal swing positioning brake
x Handrails, non slip surfaces x Extended tool kit
x Tool Kit x Customized colors
x Maintenance-free swing brake lock
x Maintenance-free HD-batteries
x Sound insulation
x Main switch for electric circuit
x Mechanical swing lock upper/lower
Hydraulics
x Electronic pump regulation x Additional hydraulic circuits
x Stepless work mode selector x Bio-degradable hydr. oil
x Pressure storage for controlled lowering of attachments x Filter for secondary circuit
with engine turned off
x Hydraulic tank shut-off valve
x Pressure compensation
x Flow compensation
x Filter with integrated fine filter area (5 mm)
x Pressure test ports
Engine
x Direct injection x Engine cold starting aid
x Turbo charger
x Dry-type air cleaner w/pre-cleaner, main and safety
element
x Sensor controlled engine idling
Operator’s Cab
x Deep drawn cab shell components x Removable lower section of front window
x All tinted windows x AM/FM stereo radio w/cassette
x Door with sliding, window x Air power seat adjustment with heating
x All-round adjustable roof flap x Warning beacon
x Rain protective shade for front window x Additional flood lights
x Washer and wiper x Ventilator
x 6-way adjustable cloth suspension seat x Armored glass
x Seat and consoles independently adjustable
x Removable handle for travel pedals
x Air conditioner
x Coat hook
x Dome light
x Sun visor
x Inside rear mirrors
x Radio installation prep-kit
x Cigar lighter and ashtray
x Removable custom floor mat
x Storage and Literature tray
x Digital instrumentation
x Digital instruments for oil temp. engine RPM and oil
pressure
x Digital hour meter visible from outside
Attachment
x Cylinders with shock absorbers x Safety check valves for hoist cylinder, high mounted
x Sealed pivots x Overload warning device
x Centralized lube points x Hydr. or mechanical quick change coupler
x SAE split flanges on all high pressure lines x Liebherr line of clams and grapples
x 18 t lifting eye on buckets x Quick disconnect hose couplers
x Two-way selector valve for bucket/clam x Special application buckets
x Ditch cleaning buckets w/rear cutting edge x Hydr. lines, on stick, for clam operation
x Work light on boom x Bucket link holder f’/clam application
x Y sealant between bucket and stick x Customized colors
Options and/or special attachments, supplied by vendors other than Liebherr, are only to be
installed with the knowledge and approval of Liebherr to retain warranty.
15
With compliments:
www.liebherr.com, E-Mail: info@lfr.liebherr.com
LIEBHERR-FRANCE S.A. 2, Avenue Joseph Rey, B.P. 287, F-68005 Colmar-Cedex, ç 03 89 21 35 10, Fax 03 89 21 37 93
LFR/SP 10010615-2-04.02 Printed in Germany by Typodruck Gagstatter. Illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 9248.