Académique Documents
Professionnel Documents
Culture Documents
Eagle/Eagle Light
According to statutory and oil companies requirements, modern drilling rigs are required to operate without manual intervention. Based on Robotic Motion Control (RMC), the Eagle/Eagle Light horizontal to vertical (HTV) equipment is fully automated and can be operated either from a separate control panel, or from the drillers cabin (DC). The system has been designed with safety as a priority and the Eagle/Eagle Light is regarded as a highly reliable system. The Eagle/Eagle Light machines are used for transfer of tubulars from a horizontal position at the catwalk, or angled at the pipe ramp. Tubulars are transferred to a vertical position in the derrick directly over the rotary centre line, or into the Mousehole and vice versa. A slewing function can be implemented on jib/yoke. (Adjust pipe in well center/stand building). The Eagle System is designed for stabbing casing & tubing and for building stands while drilling, and can assist in handling various tools. Eagle
Technical data Clearance between vertical guide rails Tubular length Tubular diameter Lifting capacity with gripper head Typical outreach Lifting capacity without gripper head Hydraulic power consumption Typical 3m (10 ft) Max. 14.5m (47.5 ft) 2 7/8" - 20" (30") 3500kg (7770lb) 11 m (36 ft) 5000kg (11100lb) 205 bar, 600 l/min. (3000 psi/160 gl/min)
Eagle on Gullfaks picking up pipe from pipe deck
Eagle Light
Technical data Clearance between vertical guide rails Tubular length Tubular diameter Lifting capacity with gripper head Capacity Hydraulic power consumption Typical 3m (10 ft) Max. 14.5m (47.5 ft) 2 7/8" - 20" (30") Max. 4500kg (9920lb) 35 joints per hour 205 bar, 300 l/min. (3000 psi/80 gl/min)
Eagle Grip Heads The Eagle light grip yoke is capable of handling tubulars of all sizes from 2 7/8" - 30". The yoke has various configurations:
Grip Heads Size 1: 2 7/8 in. - 9 5/8 in. Size 2: 10 3/4 in. - 20 in. Size 3: 22 in. - 30 in. Guide Heads Size 1: 2 7/8 in. - 20 in. Size 2: 20 in. - 30 in.
The tubular size is adjusted manually in accordance with a table at the back up die before any operation may start. The tubular centre will be at the same place each time, which is vital in order to reach stick-up within the tolerances. The grip heads are equipped with dies at the two moveable grip arms and at the back up die, to maintain proper grip.
Eagle Light gripper yoke with soft stab function
34
maritime hydraulics
www.marhyd.com
Gantry Crane
Pipedeck Pipehandler
The Pipedeck Pipehandler is designed for safe handling of drilling tubulars from the piperack to the catwalk machine and vice versa. The crane is controlled either from a remote station or a mounted cabin. To simplify the operation, the control system is computerized.
Option: RMC. (See page 39 for further information.)
Pipedeck pipehandler is an excellent alternative on rigs with restricted area for rails, and where the elevation between pipe deck and tubular feeding machine is relatively high.
Technical data Lifting capacity (SWL) - Claws from 2 7/8 to 30 - Pad eye twist gripper yoke - Lifting equipment exl. yoke Maximum load eccentricity Working radius
Pipedeck Pipehandler
0.8 - 9.0 mT (0.9 - 10 tons) 9.0 mT (10 tons) 12.0 mT (13 tons) (+/- 0.5m) (+/- 1.6 ft) max. 23.0m - min. 3.5m (max. 76 ft - min. 15 ft)
www.marhyd.com
maritime hydraulics
35
Piperack Crane
30 m/min (98 ft/min) 20 m/min (65 ft/min) 20 m/min (65 ft/min) 41.3 m (135 ft/min) 4.6 m (15 ft/min) 6.0 mT x 11.4 m (+/- 0.5 m eccentric) (6.6 tons x 37.4 ft +/- 1.6 ft eccentric) 2.5 mT x 16.0 m (+/- 3m eccentric) (2.8 tons x 52 ft +/- 10 ft eccentric) (Distance from center jib) 3.5 - 14.6 m (11.5 - 48 ft) 2 7/8 - 30 2 7/8 - 30 approx. 30 mT (incl. rail, gripper)(33 tons)
2 7/8" - 30" 40-60 joints/hour 210 bar (3045 psi) Depends on speed and operational requirements. Typical 150-300 l/min (40-80 gallon/min) Typical 1500x4000x15000[mm] (5x13x49 ft) Varying 20 30 mT (22 - 33 tons)
Catwalk Machine delivering drill pipe
36
maritime hydraulics
www.marhyd.com
Technical data Tubular range Racking capacity Lifting capacity Lifting height Hydraulic power cons.
2 7/8 to 9 3/4 470 stands within a 40x40ft Derrrick Max. 11,500 kg (25,353 lb) Up to 5000 mm (196 in) 210 bar/180 l/min - 250 l/min (3000psi/4866 gallon/min)
Fingerboards
The DP/DC fingerboards with pneumatically operated locking fingers are designed to safely lock tubulars in the derrick. This can either be pneumatically or electrically remote controlled. The locking fingers are bolted assemblies accessible from the top with the actuating cylinder protected within the fingerboard structure. Each fingerboard is individually fitted according to customer requirement and available space.
Air Pressure 7 barg (min) 10 barg (max.) (100 - 145 psi) Free Air Consumption 35 Nm3/h (intermittent) (1200 ft3/h)
www.marhyd.com
maritime hydraulics
37