Académique Documents
Professionnel Documents
Culture Documents
COPY
COPY
COPY
COPY
COPY
COPY
COPY
COPY
COPY
COPY
MOLY MINES LIMITED SPINIFEX RIDGE MOLYBDENUM PROJECT SPECIFICATION - SEMI-MOBILE CRUSHING PLANT
Page 1
COPY
MOLY MINES LIMITED SPINIFEX RIDGE MOLYBDENUM PROJECT SPECIFICATION - SEMI-MOBILE CRUSHING PLANT
Parameter Crusher Operating Time: Days per year Hours per day Shifts per day Operating hours per year Average Crusher Throughput Rate Design Life of Mine
Units
Value
t/h years
Feed to the crusher will be ROM ore, produced by open pit drill and blast methods with loading to the crusher by direct tipping from rear dump mine trucks. The expected particle size distribution of the feed to the crusher is as follows:
Size
Percent Passing
100 99 98 97 97 86 68 52 30 16
Page 2
COPY
MOLY MINES LIMITED SPINIFEX RIDGE MOLYBDENUM PROJECT SPECIFICATION - SEMI-MOBILE CRUSHING PLANT
Units mm mm mm
Page 3
COPY
MOLY MINES LIMITED SPINIFEX RIDGE MOLYBDENUM PROJECT SPECIFICATION - SEMI-MOBILE CRUSHING PLANT
Page 4
COPY
MOLY MINES LIMITED SPINIFEX RIDGE MOLYBDENUM PROJECT SPECIFICATION - SEMI-MOBILE CRUSHING PLANT
Equipment Data
Pant Dimensions:
appr. 21 m (without discharge belt conveyor) appr. 16.6 m (without truck bridges) appr. 37.5 m (incl. service crane) appr. 21.0 m (above ground level crushing plant)
Feed Hopper:
Hopper capacity: Hopper width at each tipping point: Base plates: Wear plates:
Truck Bridges:
Length of the bridge: Width of the drive lane of bridge: Dumping level above the:
Discharge Conveyor:
Width of belt: Centre distance (length): Conveying inclination: Nominal conveying speed: Maximal conveying speed: Rubber belt quality: Idler spacing upper strand: Idler spacing lower strand:
appr. 2,400 mm appr. 47 m appr. 6 appr. 1.0 m/ s appr. 1.5 m/ s EP 1250/ 4, 25:10 350 mm for the feed area 1,000 mm for the conveying area 2,500 mm
Page 5
COPY
MOLY MINES LIMITED SPINIFEX RIDGE MOLYBDENUM PROJECT SPECIFICATION - SEMI-MOBILE CRUSHING PLANT
Belt troughing angle upper strand: Belt troughing angle lower strand: Drive power: Speed adjustment: Material skirting:
Service Crane:
Main hoist Capacity max. radius: Min. Radius: Lifting height: Empty hook: Slewing range: Slewing: Manufacturer:
Aux. hoist
80 t 10.5 m 20 t 12.5 m 3m appr. 20 m 0 - 4 m/ min 360 0 0.5 Rpm TBA 3.5 m appr. 20 m 0 25 m/ min
Rock Breaker:
Dimensions: max. horizontal radius: min horizontal radius: max. vertical radius: boom length: handle length: slewing angle: Manufacturer: appr. 13,200 mm appr. 11,100 mm appr. 8,700 mm 6,600 mm 5,600 mm 180 TBA
Page 6
COPY
MOLY MINES LIMITED SPINIFEX RIDGE MOLYBDENUM PROJECT SPECIFICATION - SEMI-MOBILE CRUSHING PLANT
Hammer: Type: Impact rate: Working tool diameter: Control: Type: electro-hydraulic remote system with portable control box Atlas Copco MB 2200 (or equivalent) 280 - 550 1/min 150 mm
Discharger Bin:
appr. 270m
Electrical Equipment:
Medium Voltage: Medium Voltage (for motors): Low voltage: Protection system: Lighting: Sockets:
22 kV, 50Hz 3.3 kV or 6.6 kV, 50 Hz 400 V and 690V, 50 Hz (included) acc. to VDE 0100 230 V 400 V for 3 phase, neutral and earth 230 V for single phase, neutral and earth
Page 7
COPY