Académique Documents
Professionnel Documents
Culture Documents
Plug-in content Plug-in content Plug-in content Plug-in content Plug-in content Plug-in content
Page 1
Connection Types
Limcon checks the following connections, producing a report and a detail diagram and optionally, a virtual reality view and a DXF.
Plug-in content Simple (Shear) Connections Plug-in content Plug-in Plug-in content WSP Single Plate /Shear Tab / Fin Plate / Web Side Plate
FEP
ACLT
Angle Cleat
BAS
WAS
BPAD
Bearing Pad
Moment Connections
WBC
Welded Beam-Column Beam on one or both sides of column. With or without stiffeners or column web doubler plate.
BMEP A
Bolted Moment End Plate Beam on one or both sides of column. With or without stiffeners or column web doubler plate.
BMEP B
Bolted Moment End Plate Beam on one or both sides of column. With or without stiffeners or column web doubler plate.
BMEP C
Bolted Moment End Plate Matching mitred end plates or apex connection in rigid frame.
http://www.steel-connections.com/lmc_types.htm
12/20/2011 4:10:16 PM
Connection Types
Page 2
HBEP
Haunched Beam End Plate Rafter horizontal or inclined. Beam on one or both sides of column. With or without stiffeners or column web doubler plate.
MEPC F
Flush Moment End Plate One or two rows of bolts inside tension flange. Available for restricted range of I sections. May be used as splice.
MEPC E
Extended Moment End Plate One, two, or three rows of bolts inside tension flange stiffeners available with one and three interior rows. May be used as splice. Seismic checking available for 4E and 4ES connections.
WFP
Welded Flange Plate Shear tab welded or bolted. Seismic checking available for fully welded connection.
BFP
FPC
Flange Plate Connection to Column Web Flange plates welded to column flanges and web. Backup plate optional. (Available only with maintenance contract.)
Splices
WSPL
Welded Splice Allocation of bending moment between flanges and web determined by analysis method, either elastic, plastic, or simplified.
BSPL
Bolted Splice Allocation of bending moment between flanges and web determined by analysis method, either elastic, plastic, or simplified.
BMEP S
Base Plates
BASE
http://www.steel-connections.com/lmc_types.htm
12/20/2011 4:10:16 PM
Connection Types
Page 3
BASE M
Bracing Connections
BRAC
Single Brace 20 types of bracing connection. Bracing member may be single or double angle, rod, flattened CHS, hollow section with cleat or tee plate, or rolled section.
TCAP
KNEE
Mitred Knee For RHS or SHS with width of both members the same. With or without stiffening plate.
TYT
Y/T Connection Chord may be RHS, SHS, CHS, or rolled section; brace may be RHS, SHS or CHS.
TX
X Connection Chord may be RHS, SHS, CHS, or rolled section; brace may be RHS, SHS or CHS.
TKNG
K/N Gap Connection Chord may be RHS, SHS, CHS, or rolled section; brace may be RHS, SHS or CHS.
TKNO
K/N Overlap Connection Chord may be RHS, SHS, CHS, or rolled section; brace may be RHS, SHS or CHS.
TMEP 4
Moment End Plate Connections for RHS/SHS For compact RHS or SHS only.
http://www.steel-connections.com/lmc_types.htm
12/20/2011 4:10:16 PM
Connection Types
Page 4
TMEP 8
Moment End Plate Connections for RHS/SHS For compact RHS or SHS only.
Miscellaneous Connections
SEAT
Stiff Seat End or internal support. With or without seat plate. With or without stiffeners.
BGP
Bolt Group Rectangular array of bolts in gusset of specified grade and thickness. May be analysed by either elastic or instantaneous center method.
WGP
Weld Groups Many different configurations of fillet weld with inplane and out of plane loading. Analysed by elastic method.
http://www.steel-connections.com/lmc_types.htm
12/20/2011 4:10:16 PM