Académique Documents
Professionnel Documents
Culture Documents
Fletcher Easysteel is a division of Fletcher Building Limited. The company prides itself on its
position as a leading steel distributor in New Zealand providing a comprehensive range of
products and services to meet the needs of this market.
The Steel Book is a directory of products and services available from Fletcher Easysteel and is provided as a
guide to assist customers when determining their requirements.
It is by no means an exhaustive list of the companys service portfolio. For in this dynamic environment,
operating within a more prevalent global economy, the range of products and services that Fletcher Easysteel
offers is ever changing.
The Steel Book is an indication of the companys commitment to informing customers of what is available
from your steel supplier. Supplementary product catalogues are;
Structural Steel Properties and Design Charts Catalogue
Pipe and Pipe Fittings Catalogue
The Special Steel Book
Steel & Wire Book
Every care has been taken by staff in producing this catalogue. Fletcher Easysteel have endeavoured to
ensure accuracy of the information contained herein, however Fletcher Easysteel cannot and does not accept
responsibility for any loss or damage sustained by any party through use of this information.
Introduction:>
Quality
Fletcher Easysteel continues to maintain a strong commitment to the principles which have become total
quality management. This results in minimum waste, improved efficiencies and a service promise which
meets customer requirements. Fletcher Easysteel has a philosophy of continuous improvement in all areas
of its business.
Technical Advice
Fletcher Easysteel provides technical expertise on all products and services it markets. Specialist advice
is available on product properties, product selection and specific end use application. Any advice given
should subsequently be authorised by a qualified engineer.
Information Systems
Fletcher Easysteel operates an ERP system across its business. This includes handling front-line customer
enquiries and orders, to back-office automatic stock replenishment in line with customer forecasts.
Supporting this is a forecasting system which captures historic sales information, combining it with future
market intelligence to provide the best possible forecast. This enables us to have the right product on hand
at the right time to meet customer requirements and to ensure excellent service for our customers.
Fletcher Easysteel is continually researching the new opportunities information technology offers in making
business easier with customers and suppliers alike.
Suppliers
Fletcher Easysteel has a centrally based supply chain which leverages its strong relationship with suppliers
to provide highly competitive offers to its customers. These offers are sourced globally from quality steel
mills and suppliers which enables its customers to compete in both domestic and export markets.
Health & Safety
At Fletcher Easysteel, our safety goal is zero harm. Health and Safety is our highest priority, not only for all
employees, but also for our customers, suppliers, contractors and visitors. We take a pro-active approach
in regards to Health, Safety & Environment, and we are continually developing and implementing systems
to ensure our workplace is a safe one. At Fletcher Easysteel, everyone is responsible for ensuring that we
are working in a safe manner -
Contents:>
Merchant Bar
Mild Steel Flats
Mild Steel Squares
Mild Steel Engineering Rounds
Mild Steel Angles
Duragal Flats
Duragal Angles
Duragal Channels
Reinforcing Rounds Deformed
Tie Wire
Reinforcing Mesh
7
8
8
9
10
11
12
13
13
14
Structural Sections
Mild Steel Channels
Cold Formed Channel Lipped
Cold Formed Channel Plain
Universal Beams
Universal Columns
Rolled Steel Joists
Plain Carbon Rail
H Bearing Piles
16
17
17
18
19
20
20
20
Plate
Mild Steel Plate
Mild Steel Chequer Plate
Atmospheric Corrosion Resistant Steel Plates (Corten)
Medium Strength Plate
Boiler Quality Plate
High Strength Plate Grade 80
Wear Resistant Plate Grade 400, Grade 500
International Steel Plate Comparison
22
23
24
25
25
26
27
28
Hollow Sections
Rectangular Hollow Sections
SupaGal RHS
Cattle Rail, Unirail, Silo Section
31
32
33
Pipe
General Purpose Pipe - Grade 250
High Strength/Light Wall Pipe
Olympia Range ERW Pipe
Seamless Line Pipe
Common Pip Sizes
Seamless Line Pipe (Imperial Sizes and Weights)
Seamless Line Pipe (Metric Sizes and Weights)
ERW Line Pipe
UltraPipe
Boiler Tube Carbon Steel
Heat-Exchanger Tubes Carbon Steel
Superheater Tubes
Precision Tube ERW
35
36
37
38
40
42
43
45
46
47
48
48
49
Contents:>
Formers
Dawn Former, TruForm Bender
Bramley Former
52
53
Pipe Fittings
Masterklamp
Butt Weld Fittings
Malleable Iron Pipe Fittings
Wrought Steel Fittings
Flanges and Flange Tables
Tees
Crosses, Adjustable Corner
Postcaps - Round & Square
55
57
58
59
60
62
63
64
66
67
68
70
71
72
Manufactured Products
Grid Mesh
Expanded Metals
Grating
Perforated Sheet
Plank
Stud Plank
Safe-T-Plank
Handrail System
74
76
78
79
80
81
82
83
Welding Products
84
Consumables
91
96
97
98
Other information
Conversion Tables Useful Tables Weights - Kg/Metre 99
Approx. Comparison of Tensile Strength 100
Metric to Gauge 100
Approx. Equivalent Hardness Numbers and Tensile Strength for Brinell Hardness for Steel 101
Special Purpose Steels 102
Appendix 103
Indent 104
Merchant Bar:>
Merchant Bar:>
W
Product Shortname: FL
Specifications:
NZ/Australia
Japan/Korea
Mass per
Metre
(kg/m)
0.31
0.38
0.47
0.79
0.94
1.57
0.59
0.98
1.96
2.36
1.18
2.36
0.75
1.51
2.01
2.51
0.94
1.57
1.88
2.51
3.14
3.77
5.02
1.18
AS3679-300
AS3679-350 (on indent only)
JIS G3101-SS400
Size Designation:
Cross Sectional Area = width x thickness
= mm2
Mass per Metre
= w (mm) x t (mm) x 0.00785 = kg/m
Metres per Tonne
= 1000
= metres
kg/m
Size
(mm)
50 x 5
50 x 6
50 x 8
50 x 10
50 x 12
50 x 16
50 x 20
50 x 25
60 x 6
60 x 10
60 x12
65 x 3
65 x 5
65 x 16
65 x 25
75 x 3
75 x 5
75 x 8
75 x 10
75 x 12
75 x 16
75 x 20
75 x 25
75 x 40
Mass per
Metre
(kg/m)
1.96
2.36
3.14
3.93
4.71
6.28
7.86
9.82
2.83
4.71
5.66
1.53
2.55
8.17
12.76
1.77
2.95
4.71
5.89
7.07
9.43
11.78
14.73
23.57
Size
(mm)
80 x 6
80 x 10
80 x 12
100 x 3
100 x 5
100 x 6
100 x 8
100 x 10
100 x 12
100 x 16
100 x 20
100 x 25
130 x 6
130 x 10
130 x 12
130 x 16
130 x 20
130 x 25
150 x 3
150 x 5
150 x 6
150 x 8
150 x 10
150 x 12
Mass per
Metre
(kg/m)
3.77
6.28
7.54
2.36
3.93
4.71
6.28
7.86
9.43
12.57
15.71
19.64
6.15
10.21
12.25
16.34
20.42
25.53
3.53
5.89
7.07
9.42
11.78
14.14
Size
(mm)
150 x 16
150 x 20
150 x 25
180 x 6
180 x 10
180 x 12
200 x 3
200 x 6
200 x 8
200 x 10
200 x 12
200 x 16
200 x 20
200 x 25
250 x 3
250 x 6
250 x 10
250 x 12
250 x 16
250 x 20
300 x 3
300 x 6
300 x 12
300 x 12
Mass per
Metre
(kg/m)
18.85
23.57
29.46
8.48
14.14
16.97
4.71
9.42
12.56
15.71
18.85
25.14
31.42
39.28
5.89
11.78
19.64
37.28
31.40
39.25
7.07
14.14
23.57
28.28
Standard stock length is 6 metres, except for small 3mm flats which are often stocked in lengths shorter than 6 metres.
2mm per metre. Other sizes, grades and lengths available on indent.
Merchant Bar:>
Mild Steel Squares
Product Shortname: FL
Specifications:
NZ/Australia AS 3679-300
UK
BS 4360-43A
Japan
JIS G3101-SS400
Size Designations:
Size Range Available:
= mm2
= kg/m
= metres
Size
(mm)
Mass per
Metre (kg/m)
Size
(mm)
Mass per
Metre (kg/m)
10 x 10
12 x 12
16 x 16
20 x 20
25 x 25
32 x 32
0.79
1.13
2.01
3.14
4.91
8.04
40 x 40
45 x 45
50 x 50
65 x 65
75 x 75
12.57
15.91
19.64
33.19
44.18
Size Designations:
By diameter
AS 3679-300
AS/NZS 4671-300
AS/NZS 4671-500
BS 4360-43A
JIS G3101-SS400
= (Diameter D (mm))2 x 0.006165
= 1000
kg/m
D
= kg/m
= metres
Mass per
Metre (kg/m)
0.222
0.395
0.617
0.888
1.578
2.466
3.551
3.853
4.834
6.714
Size
(mm)
36
40
45
50
56
60
65
70
75
80
Size
(mm)
90
100
110
120
130
140
150
160
200
Available on indent.
Standard stock length is 6 metres. Engineering rounds can be cut to length on request. Straightness Tolerance The standards have a
straightness tolerance of 3mm per metre. See special steel book for more information. A large range is stocked in grade 1045
Merchant Bar:>
Mild Steel Angles
Product Shortname: ANG
Specifications:
NZ/Australia
Japan/Korea
Size Designations: Mass per Metre
Metres per Tonne
AS3679-300
AS 3679-350 (on indent only)
JIS G3101-SS400
= area of section (m2) x 0.00785 = kg/m
= 1000
= metres
kg/m
Size
(mm)
Size
(mm)
20 x 20 x 3
25 x 25 x 3
25 x 25 x 5
30 x 30 x 3
30 x 30 x 5
0.88
1.19
1.77
1.35
2.18
60 x 60 x 6
65 x 65 x 6
65 x 65 x 8
65 x 65 x 10
75 x 75 x 6
5.42
5.87
7.51
9.02
6.81
90 x 90 x 6
90 x 90 x 10
100 x 100 x 6
100 x 100 x 8
100 x 100 x 10
8.22
12.70
9.16
12.20
15.00
40 x 40 x 3
1.83
75 x 75 x 8
8.73
100 x 100 x 12
17.70
40 x 40 x 5
50 x 50 x 3
50 x 50 x 5
50 x 50 x 6
50 x 50 x 8
2.97
2.31
3.77
4.47
5.82
75 x 75 x 10
80 x 80 x 6
80 x 80 x 8
10.50
7.34
9.63
125 x 125 x 10
150 x 150 x 10
150 x 150 x 12
18.00
21.90
27.30
UNEqual Angles
Size
(mm)
Size
(mm)
Size
(mm)
65 x 50 x 6
75 x 50 x 5
75 x 50 x 6
100 x 75 x 6
100 x 75 x 8
5.16
4.37
5.63
7.98
10.30
100 x 75 x 10
125 x 75 x 6
125 x 75 x 8
125 x 75 x 10
125 x 75 x 12
12.40
9.16
11.80
14.20
17.70
150 x 90 x 10
150 x 90 x 12
150 x 100 x 10
150 x 100 x 12
17.30
21.60
18.00
22.50
Standard stock length is 6m, 9m for larger angles. Straightness Tolerance AS 3679-1990 2mm per metre. Other sizes and
lengths available on indent.
Merchant Bar:>
Duragal Flats
Product Shortname: GFL
Specifications: TS100
Grade
Minimum
Yield
Stress
MPa
Minimum
Tensile
Strength
MPa
t 6.0
t > 6.0
C400LO
C350LO
400
350
450
400
Mass
per Metre
(kg/m)
Size
Mass
per Metre
(kg/m)
50 x 4.0
50 x 5.0
65 x 4.0
65 x 5.0
75 x 4.0
75 x 5.0
90 x 6.0
100 x 4.0
1.49
1.84
1.94
2.40
2.24
2.77
4.24
2.98
100 x 5.0
100 x 6.0
100 x 8.0
130 x 5.0
150 x 5.0
150 x 6.0
150 x 8.0
200 x 5.0
3.69
4.71
6.28
4.80
5.53
7.07
9.42
7.38
Available on indent
Standard stock length is 6m. Other lengths available on indent
Size
Mass
per Metre
(kg/m)
200 x 6.0
200 x 8.0
250 x 5.0
250 x 8.0
300 x 5.0
300 x 8.0
9.42
12.60
9.22
15.70
11.10
18.80
Merchant Bar:>
Duragal Angles
Product Shortname: GANG
Specifications: TS100
Grade and Mechanical Properties:
Actual
Thickness
t
mm
Grade
t 6.0
t > 6.0
C450LO
C400LO
Minimum
Yield
Stress
MPa
450
400
Minimum
Tensile
Strength
MPa
500
450
Mass per
Metre
(kg/m)
Size
(mm)
Mass per
Metre
(kg/m)
30 x 30 x 2.5
40 x 40 x 2.5
40 x 40 x 4.0
45 x 45 x 2.5
45 x 45 x 4.0
50 x 50 x 2.5
50 x 50 x 4.0
50 x 50 x 5.0
50 x 50 x 6.0
1.06
1.43
2.20
1.62
2.50
1.81
2.79
3.42
4.21
65 x 65 x 4.0
65 x 65 x 5.0
65 x 65 x 6.0
75 x 75 x 4.0
75 x 75 x 5.0
75 x 75 x 6.0
75 x 75 x 8.0
90 x 90 x 5.0
90 x 90 x 8.0
3.69
4.52
5.62
4.29
5.26
6.56
8.59
6.37
10.50
Size
(mm)
Mass per
Metre
(kg/m)
Size
(mm)
Mass per
Metre
(kg/m)
75 x 50 x 4.0
75 x 50 x 5.0
100 x 75 x 6.0
3.54
4.34
7.74
100 x 75 x 8.0
125 x 75 x 6.0
125 x 75 x 8.0
10.20
8.92
11.70
Size
(mm)
Mass per
Metre
(kg/m)
8.92
11.70
7.27
8.95
14.90
10.80
18.00
Size
(mm)
Mass per
Metre
(kg/m)
11.30
14.90
UNEqual Angles
Available on indent
Standard stock length is 6m. Other lengths available on indent. For further information and area of section details, please refer
to Fletcher Easysteels Structural Steel Properties and Design Charts Catalogue.
Merchant Bar:>
Duragal Channels
Product Shortname: GCH
Specifications:
TS100
Grade
C450LO
C400LO
Thickness
4.0
4.0
4.0
5.0
Length
6m, 9m
9m
9m
12m
Available on indent
Standard stock lengths listed.
Not all lengths listed available in all branches.
Other lengths are available on indent.
Size
180 x 75
200 x 75
200 x 75
230 x 75
Thickness
5.0
5.0
6.0
6.0
Length
12m
12m
12m
12m
Size
250 x 90
300 x 90
300 x 90
Thickness
6.0
6.0
8.0
Length
12m
12m
12m
Merchant Bar:>
Reinforcing Rounds Deformed
Product Shortname:
REIDBAR
10
12
16
20
25
32
40
0.617
0.888
1.578
2.466
3.853
6.313
9.864
Available on indent
Grade 300
Grade 500
Reid Bar
Tie Wire
Merchant Bar:>
Reinforcing Mesh
Product Shortname: MESH
Specification:
Size Designation:
Hole size
Sheet size
Net Cover
(approx)
Weight
kg/sheet
4.35 x 1.07m
3.40
11.40
4.65 x 1.97m
4.65 x 1.97m
4.65 x 1.97m
4.65 x 1.97m
4.65 x 2.05m
4.65 x 2.05m
4.65 x 2.05m
7.52
7.52
7.52
7.52
7.98
7.98
7.98
12.44
21.85
30.87
43.76
25.34
44.51
62.89
6.15 x 2.42m
6.15 x 2.42m
12.76
12.76
35.29
49.86
4.90 x 2.20m
4.90 x 2.20m
10.08
10.08
15.85
27.98
50 x 50 x 5.30mm
50 x 50 x 4.00mm
2.40 x 1.20m
2.40 x 1.20m
17.61
17.31
6.00 x 2.70m
6.00 x 2.70m
13.68
13.68
34.44
49.59
Structural Sections:>
Structural Sections:>
Mild Steel Channels
Product Shortname: CH
Specifications:
Australia (PF)
UK (TF)
Size Designation:
AS 3679-300
BS4360-43A
kg/m
TF 50 x 25
PF 75 x 40
PF 100 x 50
PF 125 x 65
PF 150 x 75
PF 180 x 75
PF 200 x 75
PF 230 x 75
PF 250 x 90
PF 300 x 90
PF 380 x 100
2.92
5.92
8.33
11.9
17.7
20.9
22.9
25.1
35.5
40.1
55.2
= kg/m
= metres
3.8
4.2
4.7
6
6
6
6.5
8
8
10
754
1060
1520
2250
2660
2920
3200
4520
5110
7030
Standard stock lengths available are 6, 9, 12, 15 metres. Mild Steel Channels are available on an ex-stock and indent basis.
1.15mm
100mm x 50mm
1.52mm
125mm x 65mm
1.95mm
150mm x 75mm
2.25mm
For more detailed information and additional properties, please refer Fletcher Easysteels Structural Steel Properties and
Design Charts catalogue.
Structural Sections:>
Cold Formed
Channel-Lipped
Product Shortname: CRCH
Specifications:
Size Designation:
Actual Dimensions
50 x 25
76 x 38
102 x 51
Cold Formed
Channel-Plain
Product Shortname: CRCH
Specifications:
Size Designation:
Actual Dimensions
50 x 25
76 x 38
102 x 51
Structural Sections:>
Universal Beams
Product Shortname: uB
Specifications:
Australia AS3679-300
Size Designation:
Depth of Section
A
Width of Section
B
Flange Thickness
T
Web Thickness
t
150 x 14
150 x 18
180 x 18
180 x 22
200 x 18
200 x 22
200 x 25
200 x 30
250 x 26
250 x 31
250 x 37
310 x 32
310 x 40
310 x 46
360 x 45
360 x 51
360 x 57
410 x 54
410 x 60
460 x 67
460 x 75
460 x 82
530 x 82
530 x 92
610 x 101
610 x 113
610 x 125
14.0
18.0
18.1
22.2
18.2
22.3
25.4
29.8
25.7
31.4
37.3
32.0
40.4
46.2
44.7
50.7
56.7
53.7
59.7
67.1
74.6
82.1
82.0
92.4
101
113
125
150
155
175
179
198
202
203
207
248
252
256
298
304
307
352
356
359
403
406
454
457
460
528
533
602
607
612
75
75
90
90
99
133
133
134
124
146
146
149
165
166
171
172
172
178
178
190
190
191
209
209
228
228
229
7
9.5
8
10
7
7
7.8
9.6
8
8.6
10.9
8
10.2
11.8
9.7
11.5
13
10.9
12.8
12.7
14.5
16
13.2
15.6
14.8
17.3
19.6
5
6
5
6
4.5
5
5.8
6.3
5
6.1
6.4
5.5
6.1
6.7
6.9
7.3
8.0
7.6
7.8
8.5
9.1
9.9
9.6
10.2
10.6
11.2
11.9
Stock lengths vary according to the size of the beam. Length range is 6, 9, 10.5, 12, 13.5, 15, 16.5, 18 metres. Other lengths
available on indent. Other sizes of sections are also available on an indent basis. For more detailed information and additional
properties, please refer Fletcher Easysteels Structural Properties and Design Charts catalogue.
Welded Steltech beams, available on indent ex Auckland mill.
Available on indent
Structural Sections:>
Universal Columns
Product Shortname: UC
Specifications:
Size Designation:
Australia AS3679300
Flange Width B (mm) x Mass per metre (kg/m)
kg/m
Depth of
Section
A
Width of
Section
B
Flange
Thickness
T
Web
Thickness
t
100 x 15
150 x 23
150 x 30
150 x 37
200 x 46
200 x 52
200 x 60
250 x 73
250 x 90
310 x 97
310 x 118
310 x 137
310 x 158
14.8
23.4
30
37.2
46.2
52.2
59.5
72.9
89.5
96.8
118
137
158
97
152
158
162
203
206
210
254
260
308
315
320
327
99
152
153
154
203
204
205
254
256
305
307
309
311
7
6.83
9.37
11.5
11
12.5
14.2
14.2
17.3
15.4
18.7
21.7
25.0
5
6.1
6.55
8.13
7.32
8
9.27
8.64
10.5
9.91
11.9
13.8
15.7
Stock lengths vary according to the size of the column. Length range is 6, 9, 12, 15, 18 metre.
Other lengths available on indent. For more detailed information and additional properties, please refer Fletcher
Easysteels Structural Steel Properties and Design Charts catalogue.
Available on indent
Structural Sections:>
Rolled Steel Joists
Product Shortname:
RSJ
Specifications:
Australia AS3679300
Size Designation:
Mass /metre
Depth of
Width of
(Kg/m)
Section A (mm) Section B (mm)
7.2
13.1
102
125
44.5
60
Flange
thickness T
(mm)
6.07
8
Web thickness
t (mm)
Length
4.32
6
6m, 9m
6m, 9m
Available by request.
15
22
30
41
50
53
60
Australia AS3679-300
BS 4360 43A/50B
EN10025 S355JR
Size Range:
For a full range of sizes available on indent, refer to Easysteels Structural Properties and
Design Charts catalogue.
Plate:>
Plate:>
Mild Steel Plate
Product Shortname: PL
Specifications:
NZ/Australia
Japan
Size Designation:
AS1594-HA250
AS1594-HA300
AS3678-250
AS1594-HU300
JIS G3101-SS400
Sizes:
Length x width
(mm)
2400 x 1220
2700 x 2400
3000 x 1520
3100 x 2400
3400 x 2400
3600 x 1520
3600 x 1800
4000 x 2400
5200 x 2400
6000 x 1520
6000 x 1800
6000 x 2400
7600 x 2400
9000 x 2400
50
60
65
Weight Calculation: kilograms per square metre = plate thickness (mm) x 7.85
Other sizes available on indent.
* Refer to page 97 for Easycut Profiling Service.
Plate:>
Mild Steel Chequer Plate
Product Shortname: CHEQ
NZ/Australia AS1594-HA250
Specifications:
AS3678-250
Japan
JIS G3101-SS400
Size Designation:
Plate Pattern:
Bluescope Steel
(1800mm or 2100mm wide)
Length x width
(mm)
2400 x 1220
3600 x 1520
Thickness (mm)
6
10
Weight Calculation:
Plate:>
Atmospheric Corrosion
Resistant Steel Plates (corten)
Product Shortname: PLME
Specifications:
Size Designation:
Length x width
(mm)
2500 x 1250
3600 x 1520
Korea
Australia
Thickness (mm)
4
Atmospheric corrosion resistant steel plates are available on an ex-stock and indent basis.
Weight Calculation: kilograms per square metre = plate thickness (mm) x 7.85
* Note: Not all thicknesses are available in all widths and lengths.
* Refer to page 97 for Easycut Profiling Service.
Plate:>
Medium Strength Plate
Product Shortname: PLME
Specifications:
NZ/Australia
Japan
UK
Korea
AS1594-HA350 AS3678-350
JIS G3106-SM50YA JIS G3101 SS490
EN10025 Grade FE510B (355JR)
JISG 3125 SPAH (Corten)
Supplied Conditions: Tensile Strength: 490 ~ 620 MPa, 350MPa Yield Strength
Size Designation:
Length x width
(mm)
6000 x 2400
6000 x 2500
10
12
16
20
25
32
40
50
Weight Calculation: kilograms per square metre = plate thickness (mm) x 7.85.
Medium strength plate is available on an ex-stock and indent basis.
We offer a cut to size service through our service centres.
* Note: Not all thicknesses are available in all widths and lengths.
* Refer to page 97 for Easycut Profiling Service.
10
12
16
Thickness (mm)
20
25
32
40
50
60
80
100
* Note: Not all thicknesses are available in all widths and lengths.
Other grades available on indent.
Plate:>
High Strength Plate Grade 80
Product Shortname: PLHI
Description:
A high strength quenched and tempered plate, Grade 80 is approximately three times
stronger than mild steel.
Supplied Conditions:
Domex 700
Bisalloy 80
JFE HI780S
Sumiten 780S
Yield Strength
700
690
685
686
Tensile Strength
750 - 950
790 - 930
780 - 930
785 - 932
Elongation (16mm)
12% min
18%
24%
24%
Size Designation:
1500mm to 2500mm
Length
6000mm
Weight Calculation: kilograms per square metre = plate thickness (mm) x 7.85
Note: When fabricating high strength and wear resistant plate special procedures must be followed.
Please contact your local Fletcher Easysteel branch for further information.
* Refer to page 97 for Easycut Profiling Service.
Plate:>
Wear Resistant Plate
Grade 400, Grade 500
Product Shortname: PLWE
Description:
Abrasion resistant steel plate which has a longer life expectancy than mild steel. Abrasion
resistant plate offers high resistance to both wear and impact applications. This can be a
cost effective choice for equipment subjected to high levels of impact wear.
Supplied Conditions:
GRADE 400
Bisalloy 400
JFE EH400
Sumihard K400
Tensile
1320
1316
1325
Elongation
14%
19.8%
25%
Hardness (HB)
360 - 430
401 min
360 -440
GRADE 500
Bisalloy 500
JFE EH500
Sumihard K500
Tensile
1640
1449
1552
Elongation
10%
17.7%
21%
Hardness (HB)
477 - 534
477 min
450 - 550
Size Designation:
Thickness:
Widths:
Length:
6mm to 80mm
1500mm to 2500mm
6000mm
Weight Calculation: kilograms per square metre = plate thickness (mm) x 7.85
Note: When fabricating high strength and wear resistant plate special procedures must be followed. Please contact your local
Fletcher Easysteel branch for further information.
* Refer to page 97 for Easycut Profiling Service.
Plate:>
Structural Steel Plate INTERNATIONAL STANDARDS COMPARISON
AUSTRALIAN
AS 3678
EUROPEAN*
EN10025
BRITISH*
BS 4360
GERMAN*
DIN
17100
JAPANESE
JIS
AMERICAN
ASTM
INTERNATIONAL
ISO 630
Tensile
Strength
(MPa)
290
200
St33
300
A283A
Fe310-0
G3101-SS330
S235JR
40A,B
C,D
St37-2
St37-3
330
A2383B
Fe360
A, B, C, D
A283C
G3101-SS400
G3106-SM400
A, B, C
250
250L15
300, 300L15
St44-2
S275JR
S275JO
S275J2G3
S275J254
Fe430B, C, D1, D2
43A, B, C, D
400
A36
A573-400
A633A
350
410
Fe430A, B, C, D
350L15
A573-485
50A, B, C, D
S355JR
S355JO
S355J2G3
S355J2G4
St52-3
430
450
A573-450
A572-345
400, 400L15
360
380
A283D
A284C
A529
A572-290
St44-3
310
480
G3101-SS490
490
G3106-SM490
A, B, C
Fe510
B, C, D
G3106-SM490
YA, YB
450
450L15
G3106-SM520 B,C
G3101-SS540
1. This table indicates the approximate relationship between Australian grades and their international
counterparts.
2. Grades are shown in their increasing tensile strength order. In the case of American ASTM
Standards some grades are also shown in the increasing yield strength (YS) order, as their
position in the hierarchy is different when based on the yield strength compare to tensile
strength (TS).
* EN10025 has replaced BS4360 and DIN17100 Standards.
A572-415
Fe510
B,C,D
520
540
3. For grades with BOLD suffix letters C, D on British, European and International Standards, B,
C on Japanese Standards and suffix numbers 2 and 3 on German Standards, the appropriate
Australian alternative is the nearest L15 grade of the equivalent strength level (ie High or
Medium).
4. Grades readily available are highlighted in black.
5. The grade/s within the same colour band show generally acceptable alternatives, provided
relevant design factors are considered. Refer to your Fletcher EasySteel representative.
Plate:>
Boiler Quality Plate INTERNATIONAL STANDARDS COMPARISON
Tensile
Strength
(MPa)
AUSTRALIAN
AS 1548
JAPANESE
JIS
310
340
360
EUROPEAN
EN 10028
2-P235GH
3-P275N
400
G3115-SPV235
G3126-SLA235
410
G3103-SB410
A662-A
2P265GH
G3118-SGV410
P265
A515-60
A516-60
415
7-430
440
G3126-SLA325
450
G3108-SB450
G3118-SGC450
7-460
A515-65
A516-65
2-P295GH
A662-B
P290
3-P355N
A515-70
A516-70
A662-C
A537-C11
A737-B
A841
P315
G3103-SB480
G3118-SGV480
480
7-490TL20
G3115-SPV315
G3126-SLA360
490
5-490N
510
520
P235
A285-C
A516-55
390
460
INTERNATIONAL
ISO 9328.2
A285-A
A285-B
380
430
AMERICAN
ASTM
2-P355GH
G3115-SPV355
1. This table indicates the approximate relationship between Australian grades and their
international counterparts. More detailed comparisons of these Standards/grades can
be obtained by contacting your Fletcher Steel representative.
2. Grades are shown in their increasing tensile strength order. AS1548-5-490 and
equivalent grades have a higher minimum yield strength requirement than the
corresponding AS1548-7-490 and equivalent grades.
3. Grade equivalence shown is based on room temperature tensile properties only.
4. Grades readily available are highlighted in black.
A299
A738-A
Hollow Sections:>
Hollow Sections:>
Rectangular Hollow Sections
Product Shortname: RHS
Specifications:
NZ & Australia
USA & Japan
Mill Finish:
easyKOTE:
Mass (kg/m)
11.60
14.20
16.70
21.40
23.50
25.60
14.80
18.20
21.40
27.70
30.60
10.00
22.10
26.20
33.90
37.70
41.30
29.90
35.60
46.50
51.80
57.00
69.40
85.50
45.00
59.10
65.90
72.70
89.00
111.00
71.60
88.40
109.00
136.00
84.20
104.00
128.00
161.00
120.00
148.00
186.00
Size
50 x 25 x 1.6
50 x 25 x 2.0
50 x 25 x 2.5
50 x 25 x 3.0
65 x 35 x 2.0
65 x 35 x 2.5
65 x 35 x 3.0
65 x 35 x 4.0
75 x 25 x 1.6
75 x 25 x 2.0
75 x 25 x 2.5
75 x 50 x 2.0
75 x 50 x 2.5
75 x 50 x 3.0
75 x 50 x 4.0
75 x 50 x 5.0
75 x 50 x 6.0
76 x 38 x 2.5
76 x 38 x 3.0
76 x 38 x 4.0
100 x 50 x 2.0
100 x 50 x 2.5
100 x 50 x 3.0
100 x 50 x 3.5
100 x 50 x 4.0
100 x 50 x 5.0
100 x 50 x 6.0
102 x 76 x 3.5
102 x 76 x 5.0
102 x 76 x 6.0
125 x 75 x 3.0
125 x 75 x 4.0
125 x 75 x 5.0
125 x 75 x 6.0
127 x 51 x 3.5
127 x 51 x 5.0
127 x 51 x 6.0
150 x 50 x 3.0
150 x 50 x 4.0
150 x 50 x 5.0
Mass (kg/m)
27.60
14.80
18.20
21.40
27.70
30.60
33.40
16.40
19.40
17.90
22.10
26.20
33.90
37.70
41.30
29.90
35.60
46.50
51.80
57.00
69.40
85.50
45.00
59.10
72.70
89.00
111.00
54.40
71.60
88.40
109.00
136.00
71.60
88.40
109.00
136.00
84.20
104.00
128.00
161.00
Available on indent
Standard length available is 8.0m. 12.0m lengths available in some larger sizes. Other sizes and lengths are available on indent.
Standard finishes are easyKOTE and Mill finish (uncoated or lightly oiled).
Hollow Sections:>
PreGal RHS
Product Shortname:
GRHS
A uniform coating of zinc, with a minimum mass of
100g/m2 on BOTH the outside and the inside gives
protection for many applications.
Specifications:
Rectangle
Size
Mass
(kg/m)
Square
Size
Mass
(kg/m)
Square
Size
Mass
(kg/m)
50 x 25 x 1.6
50 x 25 x 2.0
50 x 25 x 2.5
50 x 25 x 3.0
65 x 35 x 2.0
65 x 35 x 2.5
65 x 35 x 3.0
75 x 25 x 1.6
75 x 25 x 2.0
75 x 25 x 2.5
75 x 50 x 2.0
75 x 50 x 2.5
75 x 50 x 3.0
75 x 50 x 4.0
75 x 50 x 5.0
100 x 50 x 2.0
100 x 50 x 2.5
100 x 50 x 3.0
100 x 50 x 3.5
100 x 50 x 4.0
100 x 50 x 5.0
102 x 76 x 3.5
125 x 75 x 3.0
125 x 75 x 4.0
125 x 75 x 5.0
150 x 50 x 3.0
150 x 50 x 4.0
150 x 50 x 5.0
1.75
2.15
2.62
3.07
2.93
3.60
4.25
2.38
2.93
3.60
3.72
4.58
5.42
6.92
8.35
4.50
5.56
6.60
7.53
8.49
10.3
9.06
8.96
11.6
14.2
8.96
11.6
14.2
20 x 20 x 1.6
0.87
20 x 20 x 2.0
25 x 25 x 1.6
25 x 25 x 2.0
25 x 25 x 2.5
25 x 25 x 3.0
30 x 30 x 1.6
30 x 30 x 2.0
30 x 30 x 2.5
30 x 30 x 3.0
35 x 35 x 1.6
35 x 35 x 2.0
35 x 35 x 2.5
35 x 35 x 3.0
40 x 40 x 1.6
40 x 40 x 2.0
40 x 40 x 2.5
40 x 40 x 3.0
40 x 40 x 4.0
50 x 50 x 1.6
50 x 50 x 2.0
50 x 50 x 2.5
50 x 50 x 3.0
1.05
1.12
1.36
1.64
1.89
1.38
1.68
2.03
2.36
1.63
1.99
2.42
2.83
1.88
2.31
2.82
3.30
4.09
2.38
2.93
3.60
4.25
50 x 50 x 4.0
50 x 50 x 5.0
65 x 65 x 1.6
65 x 65 x 2.0
65 x 65 x 2.5
65 x 65 x 3.0
65 x 65 x 5.0
65 x 65 x 6.0
75 x 75 x 2.0
75 x 75 x 2.5
75 x 75 x 3.0
75 x 75 x 3.5
75 x 75 x 4.0
75 x 75 x 5.0
89 x 89 x 2.0
89 x 89 x 3.5
89 x 89 x 5.0
100 x 100 x 3.0
100 x 100 x 4.0
100 x 100 x 5.0
5.35
6.39
3.13
3.88
4.78
5.66
8.75
10.2
4.50
5.56
6.60
7.53
8.49
10.3
5.38
9.07
12.5
8.96
11.6
14.2
SupaGals carbon equivalent of not greater than 0.39 allows it to be welded without preheat.
Hollow Sections:>
Cattle Rail
Product Shortname: CATR
Product Description:
Cattle rail, a high strength, light weight solution for stockyards and fencing.
Cattle Rail provides the inherent strength of tubular steel in a unique rounded
profile which significantly reduces the risk of damage to stock during handling.
Specifications:
Standard length is 6.1 metres.
Available in easyKOTE, no coat
or Supagal finish.
Only available on an
indent basis.
Dimensions (d x b) (mm)
53 x 35
97 x 40
97 x 40
115 x 42
115 x 42
1.6
1.6
2.0
2.0
2.5
1.84
2.95
3.65
4.29
5.30
Unirail
Product Description: UNI
Short for universal application rail, Unirail has flat surfaces for better connectivity and
rounded surfaces for aesthetics. Unirail is ideal for various end use applications including
signage, posts, fence rails, handrails, seating and structural elements in vehicle frames.
Specifications:
AS 1163 C350LO
Dimensions (d x b) (mm)
60 x 48
60 x 48
2.0
2.5
2.65
3.56
Silo Section
Product Description: SILO
Ideal for silos, bins and various structural and mechanical applications.
Specifications:
AS 1163 C350L0/C450LO
Dimensions (d x b) (mm)
75 x 64
75 x 64
2.5
3.0
4.75
5.62
Pipe:>
Pipe:>
General Purpose Pipe
Australia
Size Designation:
Supplied Condition:
AS 1074-1989
AS 1163-1991 Grade C250 (MD and HV w/t)
AS 1163-1991 Grade C350 (SL and LT w/t)
Nominal Bore (mm) x Wall Thickness (mm) x End (PE or SS) x Length (m)
SL super light
MD medium
PE plain end
LT light
HV heavy
SS screwed & socketed end
Super light
Mass per
Nominal Outside
Wall
Availability
Bore
Diameter Thickness Metre (kg/m)
(mm)
(mm)
(mm)
Black Galv. Black Galv.
15
21.3
N/A
20
26.9
2.0
1.22 1.28
25
33.7
2.0
1.56 1.62
32
42.4
2.0
1.99 2.07
40
48.3
2.3
2.61 2.70
50
60.3
2.3
3.29 3.40
65
76.1
2.3
4.19 4.33
80
88.9
2.6
5.53 5.70
100
114.3
3.2
8.77 8.98
125
139.7
3.0
10.10 11.80
150
165.1
3.0
12.00 12.30
Light
Mass per
Nominal Outside
Wall
Availability
Bore Diameter Thickness Metre (kg/m)
(mm)
(mm)
(mm)
Black Galv. Black Galv.
15
21.3
2.0
0.95 1.00
20
26.9
2.3
1.39 1.44
25
33.7
2.6
1.99 2.05
32
42.4
2.6
2.54 2.63
40
48.3
2.9
3.24 3.33
50
60.3
2.9
4.09 4.21
65
76.1
3.2
5.74 5.89
80
88.9
3.2
6.75 6.92
100
114.3
3.6
9.81 10.00
125
139.7
3.5
11.80 12.00
150
165.1
3.5
13.90 14.30
MEDIUM
Mass per
Nominal Outside
Wall
Availability
Bore
Diameter Thickness Metre (kg/m)
(mm)
(mm)
(mm)
Black Galv. Black Galv.
15
21.2
2.6
1.21 1.25
20
26.9
2.6
1.55 1.60
25
33.7
3.2
2.40 2.46
32
42.4
3.2
3.08 3.17
40
48.3
3.2
3.55 3.64
50
60.3
3.6
5.02 5.14
65
76.1
3.6
6.42 6.57
80
88.9
4.0
8.36 8.54
100
114.3
4.5
12.10 12.40
125
139.7
5.0
16.60 16.90
150
165.1
5.0
19.70 20.00
HEAVY
Mass per
Nominal Outside
Wall
Availability
Bore Diameter Thickness Metre (kg/m)
(mm)
(mm)
(mm)
Black Galv. Black Galv.
15
21.2
3.2
1.44 1.48
20
26.9
3.2
1.86 1.92
25
33.7
4.0
2.92 2.99
32
42.4
4.0
3.78 3.86
40
48.3
4.0
4.36 4.45
50
60.3
4.5
6.18 6.30
65
76.1
4.5
7.93 8.08
80
88.9
5.0
10.35 10.50
100
5.4
114.3
14.40 14.70
125
139.7
5.4
17.90 18.10
150
165.1
21.30 21.60
5.4
Standard stocked length is 6.5m. Other sizes and lengths are available on indent.
In stock
Pipe:>
High Strength/Light Wall Pipe
Product Shortname: GPIP
Plain End
Specifications:
Size Designation:
Nominal Bore (mm) x Wall Thickness (mm) x End (PE or SWG) x Length (m)
Plain end
15 x 2.0
20 x 2.3
25 x 2.6
25 x 2.0
32 x 2.0
32 x 2.6
40 x 2.9
50 x 2.9
1.00
1.44
2.05
1.64
2.10
2.63
3.33
4.21
Pipe:>
Olympia Range ERW Pipe
Specifications:
AS1163-C350LO
Surface Finishes:
Mass
(kg/m)
Size
O/D x W/T
Mass
(kg/m)
Length
p/bundle
168.3 x 4.0
168.3 x 5.0
168.3 x 6.0
168.3 x 8.0
168.3 x 10.0
193.7 x 5.0
193.7 x 6.0
193.7 x 8.0
193.7 x 10.0
219.1 x 5.0
16.2
20.1
24.0
31.6
39.0
23.3
27.8
36.6
45.3
26.4
219.1 x 6.0
219.1 x 8.0
219.1 x 10.0
219.1 x 12.5
273.1 x 5.0
273.1 x 6.0
273.1 x 8.0
273.1 x 10.0
273.1 x 12.5
323.9 x 6.0
31.5
41.6
51.6
63.7
33.1
39.5
52.3
64.9
80.3
47.0
3
3
1
1
3
3
3
1
1
3
Size
O/D x W/T
Mass
(kg/m)
Size
O/D x W/T
Mass
(kg/m)
Length
p/bundle
323.9 x 8.0
323.9 x 10.0
323.9 x 12.5
355.6 x 8.0
355.6 x 10.0
355.6 x 12.5
355.6 x 16.0
406.4 x 8.0
406.4 x 10.0
62.3
77.4
96.0
68.6
85.2
106.0
134.0
78.6
97.8
406.4 x 12.5
406.4 x 16.0
457.0 x 10.0
457.0 x 12.5
457.0 x 16.0
508.0 x 10.0
508.0 x 12.5
508.0 x 16.0
121
154
110
137
174
123
153
194
1
1
1
1
1
1
1
1
Pipe:>
Seamless Line Pipe
Product Shortname: API
Tensile Requirements:
Yield Strength
psi (min.)
kg/cm22 (min.)
Tensile Strength
psi (min.)
kg/cm22 (min.)
Standard
Grade
API 5L
A25
A
B
25,000
30,000
35,000
1,760
2,110
2,460
45,000
48,000
60,000
3,160
3,370
4,220
API 5LX
X42
X46
X52
42,000
46,000
52,000
2,950
3,230
3,660
60,000
63,000
66,000
4,220
4,430
4,640
ASTM 106
A
B
C
30,000
35,000
40,000
2,110
2,460
2,810
48,000
60,000
70,000
3,370
4,220
4,920
mm
17.10
21.30
26.70
33.40
42.20
48.30
60.30
73.00
88.90
101.60
114.30
141.30
168.30
219.10
273.05
323.45
355.60
406.40
Wall
Thickness
in.
0.091
0.109
0.113
0.133
0.140
0.145
0.154
0.203
0.216
0.226
0.237
0.258
0.280
0.322
0.365
0.375
0.375
0.375
mm
2.31
2.77
2.87
3.39
3.56
3.68
3.91
5.16
5.49
5.74
6.02
6.55
7.11
8.18
9.27
9.53
9.53
9.53
Mill Test
Pressure
psi
700
700
700
700
1,300
1,300
2,500
2,500
2,500
2,370
2,210
1,950
1,780
1,570
1,430
1,240
1,120
980
kg/cm22
49
49
49
49
91
91
175
176
176
167
155
137
125
110
101
87
79
69
Internal Pressure
at 85% Min. Yield
psi
8,020
7,720
6,400
6,020
5,020
4,540
3,860
4,200
3,670
3,360
3,130
2,760
2,510
2,220
2,020
1,750
1,590
1,390
kg/cm22
564
543
450
423
353
319
371
295
258
236
220
194
176
156
142
123
112
98
Internal Pressure at
Min. Yield based on
Nominal Wall
psi
9,440
9,080
7,530
7,080
5,900
5,340
4,540
4,940
4,320
3,960
3,690
3,250
2,960
2,610
2,380
2,060
1,880
1,640
kg/cm22
664
638
529
498
415
375
319
347
304
278
259
228
208
183
167
145
132
115
Pipe:>
Seamless Line Pipe
Product Shortname: API
Specifications:
Standard
Grade
C (max)
Mn
Si
API 5L
A25 class 1
A25 class 2
A
B
0.21
0.21
0.22
0.27
0.30 - 0.60
0.30 - 0.60
0.90 max
1.15 max
0.045 max
0.045 - 0.080
0.04 max
0.04 max
0.06 max
0.06 max
0.05 max
0.05 max
Non-expanded X42
Non-expanded
X46 and X52
Cold-expanded*
X42, X46 and X52
Grade A
Grade B
Grade C
0.29
0.31
1.25 max
1.35 max
0.04 max
0.04 max
0.05 max
0.05 max
0.31
0.29
0.25
0.30
0.35
1.25 max
0.04 max
0.05 max
0.27 - 0.93
0.29 - 1.06
0.29 - 1.06
0.048 max
0.048 max
0.048 max
0.058 min
0.058 min
0.058 min
0.10
0.10
0.10
API 5LX
ASTM A106**
* Either columbium, vandium, or a combination thereof, shall be used at the discretion of the manufacturer.
** Fletcher Steel normally stock A106, Grade B. Others are available on request.
(Fletcher Steel stock a max. carbon content of 0.23%.)
Note: For grade X60 pipe, the maximum manganese may be in the range of 1.36 to 1.40% provided the maximum carbon
content does not exceed 0.25%.
NB
(mm)
OD
(mm)
Wall
(mm)
Weight
(mm)
NB
Inch
NB
(mm)
OD
(mm)
Wall
(mm)
Weight
(mm)
NB
Inch
NB
(mm)
OD
(mm)
/8
10.3
1.7
0.357
3 1/2
90
101.6
5.7
13.6
10
250
273.0
/8
10.3
2.4
0.461
3 1/2
90
101.6
8.1
18.6
10
250
273.0
/4
13.7
2.2
0.625
3 1/2
90
101.6
13.0
22.0
10
250
273.0
/4
13.7
3.0
0.804
100
114.3
4.8
12.0
10
250
273.0
/8
10
17.1
2.3
0.848
100
114.3
6.0
16.1
10
250
273.0
/8
10
17.1
3.2
1.100
100
114.3
8.6
22.3
12
300
323.9
/2
15
21.3
2.8
1.2
100
114.3
11.1
28.2
12
300
323.9
/2
15
21.3
3.7
1.6
100
114.3
13.5
33.5
12
300
323.9
/2
15
21.3
4.8
1.9
100
114.3
17.1
41.0
12
300
323.9
/2
15
21.3
7.5
2.5
125
141.3
4.8
16.0
12
300
323.9
/4
20
26.7
2.9
1.6
125
141.3
6.6
21.8
12
300
323.9
/4
20
26.7
3.9
2.1
125
141.3
9.5
30.9
12
300
323.9
/4
20
26.7
5.6
2.9
125
141.3
12.7
40.2
12
300
323.9
/4
20
26.7
7.8
3.6
125
141.3
15.9
49.0
12
300
323.9
25
33.4
3.4
2.5
125
141.3
19.0
57.4
12
300
323.9
25
33.4
4.5
3.2
150
168.3
4.8
19.0
12
300
323.9
25
33.4
6.4
4.2
150
168.3
6.4
22.0
12
300
323.9
25
33.4
9.1
5.4
150
168.3
7.1
28.2
14
350
355.6
1 1/4
32
42.2
3.6
3.3
150
168.3
11.0
42.5
14
350
355.6
1 1/4
32
42.2
4.9
4.4
150
168.3
14.3
54.2
14
350
355.6
1 1/4
32
42.2
6.4
5.6
150
168.3
18.3
67.5
14
350
355.6
1 1/4
32
42.2
9.7
7.7
150
168.3
21.9
79.1
14
350
355.6
1 1/2
40
48.3
3.7
4.0
200
219.1
4.8
25.0
14
350
355.6
1 1/2
40
48.3
5.1
5.4
200
219.1
6.4
33.3
14
350
355.6
1 1/2
40
48.3
7.1
7.2
200
219.1
7.0
36.6
14
350
355.6
1 1/2
40
48.3
10.2
9.5
200
219.1
8.2
42.5
14
350
355.6
50
60.3
3.9
5.4
200
219.1
10.3
53.1
14
350
355.6
50
60.3
5.5
7.4
200
219.1
12.7
64.6
14
350
355.6
50
60.3
8.7
11.1
200
219.1
15.1
75.8
16
400
406.4
50
60.3
11.1
13.4
200
219.1
18.3
90.3
16
400
406.4
2 1/2
65
73.0
5.2
8.6
200
219.1
26.6
101.0
16
400
406.4
2 1/2
65
73.0
70.0
11.4
200
219.1
22.2
108.0
16
400
406.4
2 1/2
65
73.0
9.5
14.9
200
219.1
23.0
111.0
16
400
406.4
2 1/2
65
73.0
14.0
20.4
10
250
273.0
4.8
31.0
16
400
406.4
80
88.9
5.5
11.3
10
250
273.0
6.4
41.7
16
400
406.4
80
88.9
7.6
15.3
10
250
273.0
7.8
51.0
16
400
406.4
80
88.9
11.1
21.3
10
250
273.0
9.3
60.2
16
400
406.4
80
88.9
15.2
27.6
10
250
273.0
12.7
81.5
16
400
406.4
Wall
(mm)
Weight
(mm)
NB
Inch
NB
(mm)
OD
(mm)
Wall
(mm)
Weight
(mm)
NB
Inch
NB
(mm)
OD
(mm)
Wall
(mm)
Weight
(mm)
15.1
95.8
18
450
457.0
6.4
70.5
24
600
610.0
38.9
547.0
18.3
115.0
18
450
457.0
7.9
87.8
24
600
610.0
46.0
639.0
21.4
133.0
18
450
457.0
9.5
105.0
24
600
610.0
52.4
719.0
25.4
155.0
18
450
457.0
11.1
122.0
24
600
610.0
59.5
807.0
28.6
172.0
18
450
457.0
12.7
139.0
26
650
660.0
7.9
128.0
4.8
40.0
18
450
457.0
14.3
156.0
26
650
660.0
9.5
153.0
6.4
49.7
18
450
457.0
19.0
206.0
26
650
660.0
12.7
203.0
8.4
64.1
18
450
457.0
23.8
254.0
28
700
711.0
7.9
138.0
9.5
73.8
18
450
457.0
29.4
310.0
28
700
711.0
9.5
165.0
10.3
79.7
18
450
457.0
34.9
363.0
28
700
711.0
12.7
219.0
12.7
97.4
18
450
457.0
39.7
408.0
28
700
711.0
15.9
272.0
14.3
109.0
18
450
457.0
45.2
459.0
30
750
762.0
7.9
138.0
17.5
132.0
20
500
508.0
6.4
78.5
30
750
762.0
9.5
165.0
21.4
160.0
20
500
508.0
9.5
117.0
30
750
762.0
12.7
219.0
750
762.0
15.9
272.0
25.4
187.0
20
500
508.0
12.7
155.0
30
28.6
208.9
20
500
508.0
15.1
183.0
30
750
762.0
25.0
382.0
33.3
239.0
20
500
508.0
20.6
248.0
32
800
813.0
7.9
157.0
6.4
54.6
20
500
508.0
26.2
311.0
32
800
813.0
9.5
188.0
7.9
68.0
20
500
508.0
32.5
381.0
32
800
813.0
12.7
250.0
9.5
81.2
20
500
508.0
38.1
441.0
32
800
813.0
15.9
312.0
11.1
94.3
20
500
508.0
44.4
508.0
32
800
813.0
17.5
342.0
12.7
107.0
20
500
508.0
50.0
564.0
34
850
864.0
7.9
167.0
15.1
127.0
22
550
559.0
6.4
86.4
34
850
864.0
9.5
200.0
19.0
158.0
22
550
559.0
9.5
129.0
34
850
864.0
12.7
266.0
23.8
195.0
22
550
559.0
12.7
171.0
34
850
864.0
15.9
332.0
27.8
224.0
22
550
559.0
22.2
294.0
34
850
864.0
17.5
364.0
31.8
253.0
22
550
559.0
28.6
373.0
36
900
914.0
7.9
177.0
35.7
281.0
22
550
559.0
34.9
451.0
36
900
914.0
9.5
212.0
900
914.0
12.7
282.0
6.4
62.6
22
550
559.0
41.3
526.0
36
7.9
77.9
22
550
559.0
47.6
600.0
36
900
914.0
15.9
351.0
9.5
93.1
22
550
559.0
54.0
671.0
36
900
914.0
19.0
420.0
12.7
123.0
24
600
610.0
6.4
94.4
40
1000
1067.0
12.0
312.0
16.7
160.0
24
600
610.0
9.5
141.0
48
1200
1219.0
12.0
357.0
21.4
203.0
24
600
610.0
12.7
187.0
26.2
245.0
24
600
610.0
14.3
210.0
31.0
286.0
24
600
610.0
17.5
255.0
36.5
333.0
24
600
610.0
24.6
355.0
40.5
365.0
24
600
610.0
31.0
441.0
Pipe:>
Seamless Line Pipe
Product Shortname: API Sizes and Weights Imperial
0.405
1/4
0.540
3/8
0.675
1/2
0.840
3/4
1.050
OD
in.
1.315
1 1/4
1.660
1 1/2
1.900
2.375
2 1/2
2.875
3.500
3 1/2
4.000
4.500
5.563
6.625
8.625
10
10.750
12
12.750
14
14.000
16
16.000
18
18.000
20
20.000
22
22.000
24
24.000
26
26.000
28
28.000
30
30.000
32
32.000
34
34.000
36
36.000
38
38.000
40
40.000
42
42.000
44
44.000
46
46.000
48
48.000
5S
10S
0.0650
0.55
0.0650
0.70
0.0650
0.89
0.0650
1.13
0.0650
1.31
0.0650
1.64
0.0830
2.53
0.0830
3.09
0.0830
3.55
0.0830
4.00
0.109
6.49
0.109
7.75
0.109
10.13
0.134
15.49
0.156
21.40
0.156
23.53
0.165
28.46
0.165
32.06
0.188
40.58
0.188
44.68
0.218
56.48
0.0490
0.19
0.0650
0.34
0.0650
0.43
0.0830
0.68
0.830
0.88
0.109
1.43
0.109
1.85
0.109
2.13
0.109
2.69
0.120
3.60
0.120
4.42
0.120
5.07
0.120
5.72
0.134
7.93
0.134
9.48
0.148
13.67
0.165
19.02
0.180
24.65
0.188
28.28
0.188
32.39
0.188
36.48
0.218
46.98
0.218
51.72
0.250
64.68
0.250
81.02
0.312
100.91
0.312
10
0.250
36.71
0.250
42.05
0.250
47.39
0.250
52.73
0.250
58.07
0.250
63.41
0.312
85.60
0.312
92.26
0.312
98.93
0.500
0.312
112.25
0.312
118.92
20
0.250
22.36
0.250
28.04
0.250
33.38
0.312
45.61
0.312
52.27
0.312
58.94
0.375
78.60
0.375
86.61
0.375
94.62
0.500
136.17
0.500
146.85
0.500
157.53
0.625
105.59
0.500
178.89
0.500
189.57
30
0.277
24.70
0.307
34.24
0.330
43.77
0.375
54.57
0.375
62.58
0.438
82.15
0.500
104.13
0.500
114.81
0.562
140.68
0.625
182.73
0.625
196.08
0.375
168.21
0.625
222.78
0.625
236.13
STD
40S
40
0.0680
0.24
0.0880
0.42
0.0910
0.57
0.109
0.85
0.113
1.13
0.133
1.68
0.140
2.27
0.145
2.72
0.154
3.65
0.203
5.79
0.216
7.58
0.226
9.11
0.237
10.79
0.258
14.62
0.280
18.97
0.322
28.55
0.365
40.48
0.375
49.56
0.375
54.57
0.375
62.58
0.375
70.59
0.375
78.60
0.375
86.61
0.375
94.62
0.375
102.63
0.375
110.64
0.375
118.65
0.0680
0.24
0.0880
0.43
0.0910
0.58
0.109
0.87
0.113
1.15
0.133
1.71
0.140
2.32
0.145
2.77
0.154
3.72
0.203
5.91
0.216
7.73
0.226
9.29
0.237
11.01
0.258
14.91
0.278
19.35
0.322
29.12
0.365
41.29
0.375
50.55
0.0680
0.24
0.0880
0.42
0.0910
0.57
0.109
0.85
0.113
1.13
0.133
1.68
0.140
2.27
0.145
2.72
0.154
3.65
0.203
5.79
0.216
7.58
0.226
9.11
0.237
10.79
0.258
14.62
0.280
18.97
0.322
28.55
0.365
40.48
0.406
53.52
0.438
63.44
0.500
82.77
0.562
104.67
0.594
123.11
209.43
0.375
134.67
0.375
142.68
0.375
150.69
0.375
158.70
0.375
166.71
0.375
174.72
0.375
182.73
0.375
190.74
0.688
171.29
0.688
126.66
0.688
244.77
0.750
282.35
60
0.406
35.64
0.500
54.74
0.562
73.15
0.594
85.05
0.656
107.50
0.750
138.17
0.812
166.40
0.875
197.41
0.969
238.35
0.500
230.08
XS
80S
80
0.0950
0.31
0.119
0.54
0.126
0.74
0.147
1.09
0.154
1.47
0.179
2.17
0.191
3.00
0.200
3.63
0.218
5.02
0.276
7.66
0.300
10.25
0.318
12.50
0.337
14.98
0.375
20.78
0.432
28.57
0.500
43.39
0.500
54.74
0.500
65.42
0.500
72.09
0.500
82.77
0.500
93.45
0.500
104.13
0.500
114.81
0.500
125.49
0.500
136.17
0.500
146.85
0.500
157.53
0.0950
0.32
0.119
0.55
0.126
0.75
0.147
1.11
0.154
1.50
0.179
2.21
0.191
3.06
0.200
3.70
0.218
5.12
0.276
7.81
0.300
10.46
0.318
12.76
0.337
15.28
0.375
21.20
0.432
29.14
0.500
44.26
0.500
55.83
0.500
66.73
0.0950
0.31
0.119
0.54
0.126
0.74
0.147
1.09
0.154
1.47
0.179
2.17
0.191
3.00
0.200
3.63
0.218
5.02
0.276
7.66
0.300
10.25
0.318
12.50
0.337
14.98
0.375
20.78
0.432
28.57
0.500
43.39
0.594
64.43
0.688
88.63
0.750
106.13
0.844
136.61
0.938
170.92
1.031
208.87
1.125
250.81
1.219
296.58
0.500
178.89
0.500
189.57
0.500
200.25
0.500
210.93
0.500
221.61
0.500
232.29
0.500
242.97
0.500
253.65
100
0.534
50.95
0.719
77.03
0.844
107.32
0.938
130.85
1.031
164.82
1.156
207.96
1.281
256.10
1.375
302.88
1.531
367.39
120
0.438
19.00
0.500
27.04
0.562
36.39
0.719
60.71
0.844
89.29
1.000
125.49
1.094
150.79
1.219
192.43
1.375
244.14
1.500
296.37
1.625
353.61
1.812
429.39
140
0.812
67.76
1.000
104.13
1.125
139.67
1.250
170.21
1.438
223.64
1.562
274.22
1.750
341.09
1.875
403.00
2.062
483.12
160
XXS
0.188
1.31
0.219
1.94
0.250
2.84
0.250
3.76
0.281
4.86
0.344
7.46
0.375
10.01
0.438
14.32
0.294
1.71
0.308
2.44
0.358
3.66
0.382
5.21
0.400
6.41
0.436
9.03
0.552
13.69
0.600
18.58
0.531
22.51
0.625
32.96
0.719
45.35
0.906
74.69
1.125
115.64
1.312
160.27
1.406
189.11
1.594
245.25
1.781
308.50
1.969
379.17
2.125
451.06
2.344
542.13
0.674
27.54
0.750
38.55
0.864
53.16
0.875
72.42
1.000
104.13
1.000
125.49
168.21
Pipe:>
Seamless Line Pipe
Product Shortname: API Sizes and Weights Metric
10.3
OD
mm
13.7
10
17.1
15
21.3
20
26.7
25
33.4
32
42.2
40
48.3
50
60.3
65
73.0
80
88.9
90
101.6
100
114.3
125
141.3
150
168.3
200
219.1
250
273.1
300
323.9
350
355.6
400
406.4
450
457.2
500
508.0
550
558.8
600
609.6
650
660.4
700
711.2
750
762.0
800
812.8
850
863.6
900
914.4
950
965.2
1000
1016.0
1050
1066.8
1100
1117.6
1150
1168.4
1200
1219.2
5S
10S
1.65
0.82
1.65
1.04
1.65
1.33
1.65
1.68
1.65
1.95
1.65
2.44
2.11
3.77
2.11
4.60
2.11
5.29
2.11
5.96
2.77
9.67
2.77
11.55
2.77
15.09
3.40
23.08
3.96
31.89
3.96
35.06
4.19
42.41
4.19
47.77
4.78
60.46
4.78
66.57
5.54
84.16
1.24
0.28
1.65
0.51
1.65
0.64
2.11
1.01
2.11
1.31
2.77
2.13
2.77
2.76
2.77
3.17
2.77
4.01
3.05
5.36
3.05
6.59
3.05
7.55
3.05
8.52
3.40
11.82
3.40
14.13
3.76
20.37
4.19
28.34
4.57
36.73
4.78
42.14
4.78
48.26
4.78
54.36
5.54
70.00
5.54
77.06
6.35
96.37
6.35
120.72
7.92
150.36
10
6.35
54.69
6.35
62.64
6.35
70.57
6.35
78.55
6.35
86.54
6.35
94.53
7.92
127.36
7.92
137.32
7.92
147.28
7.92
157.24
7.92
167.20
7.92
176.96
20
6.35
33.31
6.35
41.77
6.35
49.73
7.92
67.90
7.92
77.83
7.92
87.71
9.53
117.15
9.53
129.13
9.53
141.12
12.70
202.72
12.70
218.69
12.70
234.67
12.70
250.64
12.70
266.61
12.70
282.27
30
7.04
36.81
7.80
51.03
8.38
65.20
9.53
81.33
9.53
93.27
11.13
122.38
12.70
155.12
12.70
171.09
14.27
209.64
15.88
271.21
15.88
292.18
15.88
312.15
15.88
332.12
15.88
351.70
STD
40S
40
1.73
0.37
2.24
0.63
2.31
0.84
2.77
1.27
2.87
1.69
3.38
2.50
3.56
3.39
3.68
4.05
3.91
5.44
5.16
8.63
5.49
11.29
5.74
13.57
6.02
16.07
6.55
21.77
7.11
28.26
8.18
42.55
9.27
60.31
9.53
73.88
9.53
81.33
9.53
93.27
9.53
105.16
9.53
117.15
9.53
129.13
9.53
141.12
9.53
152.87
9.53
164.85
9.53
176.84
9.53
188.82
9.53
200.31
9.53
212.56
9.53
224.54
9.53
236.53
9.53
248.52
9.53
260.50
9.53
272.25
9.53
284.24
1.73
0.36
2.24
0.64
2.31
0.86
2.77
1.30
2.87
1.71
3.38
2.55
3.56
3.46
3.68
4.13
3.91
5.54
5.16
8.81
5.49
11.52
5.74
13.84
6.02
16.4
6.55
22.2
7.11
28.83
8.18
43.39
9.27
61.52
9.52
75.32
1.73
0.37
2.24
0.63
2.31
0.84
2.77
1.27
2.87
1.69
3.38
2.50
3.56
3.39
3.68
4.05
3.91
5.44
5.16
8.63
5.49
11.29
5.74
13.57
6.02
16.07
6.55
21.77
7.11
28.26
8.18
42.55
9.27
60.31
10.31
79.73
11.13
94.55
12.70
123.3
14.27
155.8
15.09
183.42
17.48
255.41
17.48
342.91
17.48
364.90
19.05
420.42
60
10.31
53.08
12.70
81.55
14.27
108.96
15.09
126.71
16.66
160.12
19.05
205.74
20.62
247.83
22.23
294.25
24.61
355.26
XS
80S
80
2.41
0.47
3.02
0.80
3.20
1.10
3.73
1.62
3.91
2.20
4.55
3.24
4.85
4.47
5.08
5.41
5.54
7.48
7.01
11.41
7.62
15.27
8.08
18.63
8.56
22.32
9.53
30.97
10.97
42.56
12.70
64.64
12.70
81.55
12.70
97.46
12.70
107.39
12.70
123.30
12.70
139.15
12.70
155.12
12.70
171.09
12.70
187.06
12.70
202.72
12.70
218.69
12.70
234.67
12.70
250.64
12.70
266.61
12.70
282.27
12.70
298.24
12.70
314.22
12.70
330.19
12.70
346.16
12.70
351.82
12.70
377.79
2.41
0.48
3.02
0.82
3.20
1.12
3.73
1.65
3.91
2.24
4.55
3.29
4.85
4.56
5.08
5.51
5.54
7.63
7.01
11.64
7.62
15.59
8.08
19.01
8.56
22.77
9.53
31.59
10.97
43.42
12.70
65.95
12.70
83.19
12.70
99.43
2.41
0.47
3.02
0.80
3.20
1.10
3.73
1.62
3.91
2.20
4.55
3.24
4.85
4.47
5.08
5.41
5.54
7.48
7.01
11.41
7.62
15.27
8.08
18.63
8.56
22.32
9.53
30.97
10.97
42.56
12.70
64.64
15.09
96.01
17.48
132.08
19.05
158.10
21.44
203.53
23.88
254.55
26.19
311.17
28.58
373.83
30.96
442.08
100
15.09
75.92
18.26
114.75
21.44
159.91
23.83
194.96
26.19
245.56
29.36
309.62
32.54
381.53
34.93
451.42
38.89
547.71
120
11.13
28.32
12.70
40.28
14.27
54.20
18.26
90.44
21.44
133.06
25.4
186.97
27.79
224.65
30.96
286.64
34.93
363.56
38.10
441.49
41.28
527.02
46.02
640.03
140
20.62
100.92
25.40
155.15
28.58
208.14
31.75
253.56
36.53
333.19
39.67
408.26
44.45
508.11
47.63
600.63
52.37
720.15
160
XXS
4.78
1.95
5.56
2.90
6.35
4.24
6.35
5.61
7.14
7.25
8.74
11.11
9.53
14.92
11.13
21.35
7.47
2.55
7.82
3.64
9.09
5.45
9.7
7.77
10.15
9.56
11.07
13.44
14.02
20.39
15.24
27.68
13.49
33.54
15.88
49.11
18.26
67.56
23.01
111.27
28.58
172.33
33.32
238.76
35.71
281.70
40.49
365.35
45.24
459.37
50.01
564.81
53.98
672.26
59.54
808.22
17.12
41.03
19.05
57.43
21.95
79.22
22.23
107.92
25.40
155.15
25.40
186.97
Wall Thickness = mm
Weight = kg/m (plain end mass)
5S,10S, 40S, 80S ANSI B36.19
Pipe:>
Carbon Steel Comparison Chart:
uSA
uK
GERMANY
ASTM A 53
BS3601
DIN 1629
Grade A SMLS
St 35
SIS 1233-05
GRADE B SMLS
St 45
SIS 1434-05
ASTM A 53
BS3601
DIN 1626
Grade A ERW
ERW 22
Grade B ERW
ERW 27
ASTM A 53
BS 3601
DIN 1626
FBW
BW 22
ASTM A 106
BS3602
DIN 171752)
Grade A
HFS 23
St 35-8
SIS 1233-06
Grade B
HFS 27
St 45-8
SIS 1435-05
Grade C
HFS 35
ASTM A 134
BS3601
DIN 1626
EFW
Blatt 2 EFW
ASTM A 135
BS3601
DIN 1626
Grade A
ERW 22
SIS 1233-06
Grade B
ERW 27
SIS 1434-06*
ASTM a 139
BS3601
DIN 1626
Grade A
EFW 22
Blatt 2 St 37
Grade B
EFW 27
Blatt 2 St 42
BS3602
C45
St 34-2
C50
St 37-2
C55
KC55
St 42-2
EFW 28
KC60
KC65
API 5L
2)
St 42-22
St 42-22
EFW 28S
St 52-2
DIN 1629
KC70
1)
SWEDEN
St 52-2
Grade A EFW
ERW 22
Blatt 3 St 34-2 FW
Grade B EFE
ERW 27 1)
Blatt 4 St 37-2 FW
API 5L
BS3601
DIN 1626
FBW
BW 22
Pipe:>
ERW Line Pipe
Product Shortname: API
Specifications: API 5L Grade B PSL1
Applications: Pressure piping for flammable, toxic, high pressure or lethal fluids and
gases. Pipelines for gas and liquid petroleum.
kg/m
kg/m
16.07
42.55
22.32
64.64
21.77
41.77
30.97
60.31
25.60
49.73
28.26
73.88
42.56
81.33
33.31
Pipe:>
UltraPipe
Product Shortname: API
Specifications:
Surface Finishes:
Welding Information:
UltraPipe is easily welded and is generally preheat-free. It has good arc flow characteristics
with manual arc welding, and can be welded using most methods such as MMaw, TIG, MiG,
GMAM, oxy-acetylene, SAW and resistance welding.
Applications:
Pressure piping for flammable, toxic, high pressure or lethal fluids and gases. Pipelines
for gas and liquid petroleum. Casings for well drilling or form work for concrete poles.
Structural and Architectural uses such as columns, chords and webs of trusses and braces
in buildings, bridges, towers and poles.
Mass
(kg/m)
Size
O/D x W/T
Mass
(kg/m)
Size
O/D x W/T
Mass
(kg/m)
Size
O/D x W/T
Mass
(kg/m)
168.3 x 4.8
168.3 x 6.4
168.3 x 7.1
219.1 x 4.8
219.1 x 6.4
219.1 x 8.2
19.35
25.55
28.22
25.37
33.57
42.65
273.1 x 4.8
273.1 x 6.4
273.1 x 9.3
273.1 x 12.7
323.9 x 6.4
323.9 x 9.5
31.76
42.09
60.50
81.55
50.11
73.65
323.9 x 12.7
355.6 x 6.4
355.6 x 9.5
355.6 x 12.7
406.4 x 6.4
406.4 x 9.5
97.46
55.11
81.08
107.4
63.13
92.98
406.4 x 12.7
457 x 6.4
457 x 9.5
457 x 12.7
123.3
71.12
104.8
139.2
Pipe:>
Boiler Tube Carbon Steel
Product Shortname: BT
Outside
Dia.
Wall
Thickness
Specifications:
Kg/
metre
Outside
Dia.
Wall
Thickness
Kg/
metre
Outside
Dia.
Wall
Thickness
Kg/
metre
21.30
2.90
1.32
48.30
5.00
5.34
63.50
6.30
8.89
25.00
2.90
1.58
48.30
8.00
7.95
70.00
3.20
5.27
29.00
3.00
1.92
50.80
3.20
3.76
70.00
3.60
5.90
31.80
3.20
2.26
50.80
3.60
4.19
70.00
4.00
6.51
31.80
3.60
2.50
50.80
4.00
4.62
70.00
5.00
8.01
33.70
3.60
2.67
50.80
4.50
5.14
70.00
6.30
9.90
12.23
38.10
3.20
2.75
50.80
5.00
5.65
70.00
8.00
38.10
3.60
3.06
50.80
6.30
6.91
76.10
3.20
5.75
38.10
4.00
3.36
50.80
8.00
8.44
76.10
3.60
6.44
38.10
5.00
4.08
54.00
3.60
4.47
76.10
4.00
7.11
38.10
6.30
4.94
54.00
8.00
9.08
76.10
4.50
7.95
42.40
3.20
3.09
57.10
3.20
4.25
76.10
5.00
8.77
42.40
3.60
3.44
57.10
3.60
4.75
76.10
6.30
10.84
13.44
42.40
4.00
3.79
57.10
4.00
5.24
76.10
8.00
42.40
5.00
4.61
57.10
5.00
6.42
88.90
3.60
7.57
42.40
6.30
5.61
57.10
6.30
7.89
88.90
4.00
8.38
42.40
8.00
6.79
57.10
8.00
9.69
88.90
5.00
10.35
44.50
3.20
3.26
60.30
3.20
4.51
88.90
6.30
12.83
15.96
44.50
3.60
3.63
60.30
3.60
5.03
88.90
8.00
44.50
4.00
4.00
60.30
4.00
5.55
101.60
3.60
8.70
44.50
4.50
4.44
60.30
5.00
6.82
101.60
4.00
9.63
44.50
5.00
4.87
60.30
6.30
8.39
101.60
4.50
10.78
44.50
6.30
5.94
60.30
8.00
10.32
101.60
5.00
11.91
44.50
8.00
7.20
63.50
3.20
4.76
101.60
6.30
14.81
48.30
3.20
3.56
63.50
3.60
5.32
101.60
8.00
18.47
48.30
3.60
3.97
63.50
4.00
5.87
114.30
4.00
10.88
48.30
4.00
4.37
63.50
4.50
6.55
114.30
6.30
16.78
48.30
4.50
4.86
63.50
5.00
7.21
Pipe:>
Heat Exchanger
Tubes Carbon Steel
Product Shortname:
BT
Specifications:
Length
Superheater Tubes
Product Shortname:
BT
Specifications:
Length
Pipe:>
Precision Tube (ERW)
Product Shortname: EWSS
Specifications:
Size Designation:
Wall Thickness
(mm)
Size (mm)
9.5 x 9.5
9.5 x 9.5
12.7 x 12.7
16.0 x 16.0
16.0 x 16.0
19.0 x 19.0
19.0 x 19.0
19.0 x 19.0
22.2 x 22.2
22.2 x 22.2
25.4 x 25.4
1.2
1.6
1.2
1.2
1.6
1.2
1.4
1.6
1.2
1.6
1.2
0.341
0.438
0.449
0.553
0.720
0.677
0.784
0.889
0.811
1.065
0.906
25.4 x 25.4
25.4 x 25.4
25.4 x 25.4
25.4 x 25.4
31.8 x 31.8
31.8 x 31.8
35.0 x 35.0
38.0 x 38.0
38.0 x 38.0
38.0 x 38.0
51.0 x 51.0
Size (mm)
Wall Thickness
(mm)
Size (mm)
25.4 x 12.7
31.8 x 16.0
35.0 x 19.0
35.0 x 19.0
35.0 x 19.0
1.6
1.6
1.2
1.6
2.0
0.889
1.192
0.966
1.273
1.573
51.0 x 25.4
51.0 x 25.4
51.0 x 25.4
63.5 x 38.0
63.5 x 38.0
1.050
1.192
1.894
1.873
1.531
1.520
1.636
1.373
1.815
2.249
2.443
RECTANGULAR
Wall Thickness Mass per Metre
(mm)
(kg/m)
1.2
1.6
2.0
1.6
2.0
1.373
1.815
2.249
2.443
3.034
Pipe:>
Precision Tube (ERW)
Product Shortname:
EWR
Specifications:
Wall
Thickness
(mm)
Weight
Per Metre
(kg/m)
Outside
Diameter
(mm)
Wall
Thickness
(mm)
Weight
Per Metre
(kg/m)
Outside
Diameter
(mm)
Wall
Thickness
(mm)
Weight
Per Metre
(kg/m)
9.5
1.2
0.246
25.4
2.0
1.154
47.6
1.6
1.815
9.5
1.6
0.312
28.6
1.2
1.066
51.0
1.6
1.949
12.7
1.2
0.341
28.6
1.6
1.065
51.0
2.0
2.417
12.7
1.4
0.390
28.6
2.0
1.312
54.0
1.6
2.068
12.7
1.6
0.438
31.8
1.2
0.906
57.0
1.6
2.186
16.0
1.2
0.438
31.8
1.4
1.050
57.0
2.0
2.713
16.0
1.4
0.504
31.8
1.6
1.192
57.0
2.6
3.488
16.0
1.6
0.568
31.8
2.0
1.470
63.5
1.6
2.443
16.0
2.0
0.691
35.0
1.2
1.000
63.5
2.0
3.034
19.0
1.2
0.527
35.0
1.6
1.318
76.2
1.6
2.940
19.0
1.4
0.608
35.0
2.6
2.018
76.2
2.0
3.655
19.0
1.6
0.687
38.0
1.2
1.089
76.2
2.6
4.713
19.0
2.0
0.839
38.0
1.4
1.264
88.9
1.6
3.445
22.2
1.2
0.622
38.0
1.6
1.436
101.6
1.6
3.946
22.2
1.4
0.718
38.0
2.0
1.776
101.6
2.0
4.913
22.2
1.6
0.813
38.0
2.6
2.270
22.2
2.0
0.997
41.3
1.6
1.567
25.4
1.2
0.716
44.5
1.2
1.282
25.4
1.4
0.829
44.5
1.6
1.693
25.4
1.6
0.939
44.5
2.6
2.687
Standard stock length is 5.5 metre. Note: Other sizes may be available on request.
Formers:>
Formers:>
Dawn Hydraulic Bender
Product Shortname: FORM
DAWN 50mm HYDRAuLIC PIPE BENDER
The Dawn Pipe Former is designed to bend from extra light to extra heavy pipes
and RHS with excellent results.
Applications:
Water services, gas services, hand rails, gates, fences, framework for buildings, etc.
Sizes:
Hydraulic Jack:
Complete with six formers: 15, 20, 25, 32, 40, and 50mm.
(Individual formers also available)
Size of former relates to nominal bore of pipe.
Formers are bored to suit 1-3/8 (35mm) ram
Material: S.G. (Ductile) Iron
The hydraulic jack has 10 ton capacity and 300mm (12) stroke.
Truform Bender
Product Shortname: FORM
The TruForm Bender has been developed to eliminate failure and wrinkling when bending
pipe of all gauges and strengths.
Applications:
Steel fencing, street sign posts, gates, handrails, sheep, cattle and horse stockyards,
exhaust systems, bull bar construction, trampolines, domestic and commercial furniture, fire
sprinkler systems, compressed air lines, playground equipment, box and boat trailers, ladder
racks, roll bars, sheds, glasshouses, bench frames, etc.
Sizes:
The TruForm Bender will bend steel, stainless steel and aluminium. It is able to bend pipe
from 15NB to 50NB. The bender has a hydraulic operation which allows the bend angle to
range from 10 to 180.
Available as a complete package or components are available individually.
* Pipe formers are available on an indent only basis.
Formers:>
Bramley Former
Product Shortname: form
HEAVY DUTY HYDRAULIC PIPE BENDER
Capacity:
This machine is designed to bend pipe of 1/2 to 2 capacity to a maximum angle of 90.
The Hydraulic Ram is easily removed from the frame and converts to a 12 ton jack.
Specifications:
Complete with 6 lightweight aluminium alloy formers with large angle of arc to support pipe
during bending which ensures bend of superior quality. Elliptical cross section of formers
to minimise flattening of bend. Solid frame fabrication and nose cone support eliminates
flexing during bending operation.
Sizes:
Round Formers
/2 Pipe Former
75mm
/4 Pipe Former
105mm
1 Pipe Former
140mm
175mm
1 /2 Pipe Former
200mm
2 Pipe Former
240mm
Shipping Dimensions:
60kg, 0.09m3
Available as a complete package or components are available individually.
* Bramley formers are available on an indent only basis.
Pipe Fittings:>
Pipe Fittings:>
Masterklamp outside pipe (mm). Product Shortname: CLIP
1.02
1.04
1.05
1.07
1.08
2.01
2.02
2.03
2.04
2.05
2.06
2.07
2.08
2.09
2.10
3.01
3.03
4.01
4.02
4.03
4.04
4.06
4.10
4.11
Pipe Fittings:>
Masterklamp outside pipe (mm). Product Shortname: CLIP
4.13
4.18
4.20
4.21
5.01
5.02
5.03
5.09
5.11
5.12
5.13
6.01
6.03
6.06
6.08
6.09
Pipe Information
O.D
N.B
N.B
Pipe Fittings:>
Butt Weld Fittings
Specifications:
Selection Guide
Cap BCAP
Tee BTEE
45 Elbow BLRE
Concentric Reducer
BCR
Pipe Fittings:>
Malleable Iron Pipe Fittings
Female/Female Elbow
MELB
Reducing Tee
MTEE
45 Female/Female
Elbow MELB
Socket
MSOC
Hex Nipple
MNIP
Reducing Socket
MSOC
Tee
MTEE
M&F Bend
MBEN
45 M&F Elbow
MELB
90 M&F Elbow
MELB
Mac Union
MUNI
Reducing Bush
MBUS
Cap
MCAP
Back Nut
METN
Plug
MPLU
Pipe Fittings:>
Wrought Steel Fittings
Specifications:
Selection Guide
Female Elbow
Long Bend
WELB
Tee
WTEE
M & F Elbow
WELB
Barrel Piece
WBEN
Plug
WNIP
Reducing Bush
WPLU
WBUS
Socket
WSOC
Hex Nipple
WNIP
Reducing Socket
WSOC
Barrel Nipple
WNIP
Pipe Fittings:>
Flanges and Flange Tables
Product Shortname: F150, F300, F600, FTD, FTE, FTF, FTH FTJ
THREADED (SCREWED) FLANGES
made of steel, are confined to special applications. Their chief merit is that they can be
assembled without welding: this explains their use in extremely high pressure services,
particularly at or near atmospheric temperature where alloy steel is essential for strength
and where the necessary postweld heat treatment is impractical. Screwed flanges are
unsuitable for conditions involving temperature or bending stresses of any magnitude,
particularly under cyclic conditions where leakage through the threads may occur in
relatively few cycles of heating or stress: seal welding is sometimes employed to overcome
this, but cannot be considered as entirely satisfactory.
SLIP ON FLANGES
continue to be preferred to welding neck flanges by many users due to their initially lower
cost, the reduced accuracy required in cutting pipe to length and the somewhat greater ease
of assembly alignment; however their final installed cost is probably not much, if any, less
than that of welding neck flanges. Their calculated strength under internal pressure is of
the order of twothirds that of welding neck flanges, while their life under fatigue is about
onethird. For these reasons slip on flanges are limited to sizes 1/2" to 2 1/2" in the 1500lb
standard, are not shown in the 2500lb standard and the ASME Boiler Construction Code
limits their use to the 4" size.
are distinguished from other types by their long tapered hub and gentle transition of
thickness in the region of the butt weld joining them to the pipe. The long tapered hub
provides an important reinforcement of the flange proper from the standpoint of strength
and resistance to dishing. The smooth transition from flange thickness to pipe wall
thickness effected by the taper is extremely beneficial under conditions of repeated bending,
caused by line expansion or other variable forces, and produces an endurance strength of
welding neck flanged assemblies equivalent to that of a butt welded pipe. Thus this type
of flange is preferred for every severe service condition, resulting from high pressure or
subzero/elevated temperatures, and whether loading conditions are substantially constant
or fluctuates between wide limits: welding neck flanges are particularly recommended for
handling high explosive, flammable or costly liquids, where loss of tightness or local failure
may be accompanied by disastrous consequences.
BLIND FLANGES
are used to blank off the ends of piping, valves and pressure vessel openings. From the
standpoint of internal pressure and bolt loadings, blind flanges, particularly in the larger
sizes, are the most highly stressed of all American Standard flange types; however,
since the maximum stresses in a blind flange are bending stresses at the centre, they
can safely be permitted to be higher than other types of flanges. Where temperature,
or repeated severe water hammer, is a service factor, consideration should be given to
closures made of welding neck flanges and caps.
D = BS.10
Table 'D'
E = BS.10
Table 'E'
F
= BS.10
Table 'F'
H = BS.10
Table 'H'
J = BS.10
Table 'J'
150 = BS.1560
Class 150
6 = BS.4504
Table 6 (6bar)
10 = BS.4504
Table 10 (10 bar)
16 = BS.4504
Table 16 (16 bar)
25 = BS.4504
Table 25 (25 bar)
*
13mm thickness may be used
** thickness includes raises face see Flange standard
Pipe Fittings:>
Fence Fittings:>
Tees
Dt
L
Db
Code
Thru
(mm)
Butt
(mm)
Dt
(mm)
Db
(mm)
L
(mm)
W
(mm)
Bolt (mm)
& Nut
T
(mm)
Weight
(g)
T2520
25
20
33.7
26.9
83
44
m8x50
2.5
190
T2025
20
25
26.9
33.7
75
45
m8x60
2.5
165
T2525
25
25
33.7
33.7
78
50
m8x60
3.0
250
T2532
25
32
33.7
42.4
86
61
m8x70
3.0
360
T3225
32
25
42.4
33.7
95
50
m8x60
3.0
335
T3232
32
32
42.4
42.4
100
60
m10x70
3.0
415
T3240
32
40
42.4
48.3
110
68
m10x75
3.0
465
T4032
40
32
48.3
42.4
117
63
m10x70
3.0
440
T4040
40
40
48.3
48.3
68
115
m10x75
3.0
510
T4050
40
50
48.3
60.3
120
78
m10x90
3.0
645
T5025
50
25
60.3
33.7
118
64
m10x60
3.0
485
T5032
50
32
60.3
42.4
125
63
m10x75
3.0
510
T5040
50
40
60.3
48.3
126
68
m10x85
3.0
590
T5050
50
50
60.3
603
130
77
m10x90
3.0
680
Fence Fittings:>
Crosses
Db
Dt
Code
Thru
(mm)
Butt
(mm)
Dt
(mm)
Db
(mm)
L
(mm)
W
(mm)
Bolt (mm)
& Nut
T
(mm)
Weight
(g)
X2520
25
20
33.7
26.9
115
45
m8x60
2.5
305
X2525
25
25
26.9
33.7
118
45
m8x60
2.5
340
X3225
32
25
42.4
33.7
148
49
m10x60
2.5
445
X3232
32
32
42.4
42.4
143
56
m10x70
3.0
520
X4032
40
32
48.3
42.4
165
60
m10x75
3.0
615
X4040
40
40
48.3
48.3
165
66
m10x75
3.0
645
X5025
50
25
60.3
33.7
172
64
m10x70
3.0
665
X5032
50
32
60.3
42.4
185
68
m10x75
3.0
785
X5040
50
40
60.3
48.3
194
67
m10x85
3.0
785
X5050
50
50
60.3
60.3
198
75
m12x100
3.0
905
Bolt (mm)
& Nut
T
(mm)
Weight
(g)
Adjustable Corners
18 0
Db
T
W
Dt
L
Code
Thru
(mm)
Butt
(mm)
Dt
(mm)
Db
(mm)
L
(mm)
W
(mm)
AC2525
25
25
33.7
33.7
155
54
m8x60
3.0
540
AC3225
32
25
42.4
33.7
165
54
m10x60
3.0
625
AC3232
32
32
42.4
42.4
183
65
m10x70
3.0
775
AC4032
40
32
48.3
42.4
183
65
m10x70
3.0
800
AC4040
40
40
48.3
48.3
188
71
m10x75
3.0
850
AC5025
50
25
60.3
33.7
180
53
m10x70
3.0
740
AC5032
50
32
60.3
42.4
m10x70
3.0
815
AC5040
50
40
60.3
48.3
176
71
m10x75
3.0
890
AC5050
50
50
60.3
60.3
200
83
m10x85
3.0
1145
H
T
To suit
To suit
NB (mm) OD (mm)
H
(mm)
D
(mm)
T
(mm)
Weight
(mm)
CR20
20
26.9
23
30.5
1.5
25
CR25
25
33.7
28
37.5
1.5
40
CR32
32
42.4
28
46
1.5
48
CR40
40
48.3
30
53
1.5
85
CR50
50
60.3
30
65
1.5
114
CR65
65
76.1
82
1.5
153
CR80
80
88.9
30
94
1.5
188
CR90
90
101.6
36
116
1.5
250
CR100
100
114.3
38
120
1.5
289
CR125
125
139.7
40
144
1.5
509
CR150
150
165.1
40
167
1.5
551
Code
To suit
Tube (mm)
H
(mm)
D
(mm)
T
(mm)
Weight
(mm)
CS40
40
22
44
1.5
33
CS50
50
27
56
1.5
50
CS65
65
70
1.5
80
CS75
75
29
80
1.5
105
CS100
100
31
106
1.5
159
NZ Steel
Australia
Japan
Size Designation:
Sheet:
Coil:
AS 1595 NZCC
AS 1595 CA-2SE
JIS G3141-SPCC SD
thickness (mm) x width (mm) x length (m)
width (mm) x thickness (mm)
Mechanical Properties
Longitudinal Tensile
Typical
Specification
190
160 - 240
340
290 - 365
% Elongation on GL = 50
45
34% min
HRB Hardness
52
40 - 60
Applications:
Excellent for bending and roll forming. Good for pressing, drawing and welding.
0.5
0.6
0.8
1.0
1.2
1.6
2.0
2.5
3.0
denotes sizes normally available. Contact your local branch for sizes outside this range. Other widths are stocked as
required.
Tolerances:
NZ Steel NZCC
Full coil sheeting, slitting, blanking and recoiling facilities available at Easysteels Service Centres.
Can we help reduce your wastage?
NZ/Australia
Japan
AS 1594
AS 1594
JIS G3131
Mechanical Properties
HA250
HA2
SPHC
Structural Grade
Commercial Grade
Commercial Quality
Minimum
275
250
380
350
Elongation on GL = 200
31
16
Thickness (mm)
1.6
STRUCTURAL GRADE
2400 X 1220
2.0
2.5
3.0
NZ
Japan
Australia
NZS/AS
JIS G3302
AS 1397
1397:2001 G250
SGHC or SGCC (Commercial Quality)
on application only
Zincform
Zinc-Hi-Ten
Galva-Bond
Mechanical Properties
Guaranteed Minimum
250
320
25
0t
NZ
Japan/Korea
Australia
grams/m2
symbol
grams/m2
symbol
grams/m2
symbol
150
Z150
COATING WEIGHTS
200
Z200
200
Z20
200
Z200
275
Z275
275
Z27
275
Z275
450
Z450
450
Z45
450
Z450
600
Z600
600
Z60
600
Z600
Thickness (mm)
0.30-3.0
Width (mm)
762-1829
Australia
0.55-3.0
610-1525
NZ
0.3-2.0
610-1220
Finishes Available:
Length x width
(mm)
2438 x 1219mm
0.4
0.55
0.75
0.95
1.15
1.55
2.0
2.5
3.0
Z06
Z08
Z10
Z12
Z18
Z20
Z22
Z25
Z27
Z35
Z45
Z60
Equivalent
coating
thickness
0.013
0.017
0.021
0.026
0.034
0.040
0.043
0.049
0.054
0.064
0.080
0.102
Coating
mass
symbol
F04
F06
F08
F10
F12
F18
Equivalent
coating
thickness
0.008
0.013
0.017
0.021
0.026
0.034
Japan/Korea
JIS G3313
RoHS compliant
SECC-SC
SECD-SD
SECEN
Guaranteed Minimum
270
Elongation %
> 37
Thickness (mm)
1.2
1.6
0.6
0.8
1.0
2.0
2.5
3.0
denotes sizes normally available. Contact your local branch for sizes outside this range. Other widths are stocked as required.
Note: Thickness refers to base metal thickness (BMT). Fletcher Steel offers a coil slitting and guillotining service for you to get
the most economic use of your material.
AS 1397:2001
Applications:
Mechanical Properties
Guaranteed Minimum
300
340
20
1t
Width Thickness
Gr 300
70 - 1000
70 - 1230
70 - 1230
Gr 550
70 - 1000
70 - 1230
70 - 1230
0.4
0.55
2438 x 1219mm
Japan/Korea
Applications:
Greater heat resistance than galvanised and cold reduced steel and
maintains finish at elevated temperatures.
0.6
0.8
1.0
1.2
1.6
Manufactured Products:>
Manufactured Products:>
Grid Mesh
Product Shortname: GRID
Gridmesh:
Gridmesh is a single sheet of steel that has been slit and expanded into a network of
uniformed shaped openings. As a result Gridmesh has a distinctive pattern that is both
decorative and strong. It is tough and durable with a high strength to weight ratio.
The GR series are relatively open meshes for general purpose jobs whilst the GM series have
smaller mesh apertures for heavy duty jobs.
The steel used in all cases is low carbon steel 3.2mm or 5mm thick. It is available black or
galvanised and can be readily welded.
Applications:
Walkways, ramps, stairtreads, work platforms, vehicle ramps, gratings and floorings.
On the farm it can be used for stock crates, sheep races and woolshed floorings. For
piggeries, it can be supplied in a flattened form for farrowing and weaner applications, along
with the standard Gridmesh for fully grown animals.
It can be attractive as well as functional when used for security and decorative grills,
sunscreens and dividers.
Important:
When ordering GRIDMESH, note that the LWM long way of mesh is at right angles to the
length of the sheet.
e.g. sheet size 3000 x 1200 LWM runs across the 1200 dimension.
Also note that when used on a ramp or a walkway, the mesh must span the gap in the LWM
direction. Only when laid in this way, will the mesh have maximum rigidity. It should also be
fastened every 4th mesh or approximately 150mm centres, and have at least 25mm overlap
onto the supports.
Manufactured Products:>
Grid Mesh
thickness
shortway
of mesh
(SWM)
bridge
strand width
Sizes Available:
MESH TYPE
GR300/WK4514
GR400/WK4519
GM450
AGRIMESH/FCAT
GM575/WK3028
WALKWAY
Unit
SWM
mm
Size
LWM
mm
Strand
Width
mm
Sheet
Thickness
mm
Mass
(10%)
kg/m2
Sheet Sizes
(nominal)
mm
42
45
25
25
30
25
135
135
75
75
75
75
8.00
11.00
7.50
7.00
10.50
7.00
5.00
5.00
5.00
3.20
5.00
3.20
14.60
19.50
22.00
11.20
28.10
11.20
Load
Distributed - 2.5kPa
Distributed - 5.0kPa
Concentrated - 1.1kN @ 1.2mCtrs.
* These meshes, whilst safe for the spans shown maybe springy underfoot.
support
span
weld to support
For more detailed information regarding Gridmesh contact your local Easysteel branch.
Manufactured Products:>
Expanded Metals
Product Shortname:
XPM
General Information:
Very similar to Gridmesh, expanded metals are also a single sheet of steel slit and expanded
into a network of uniformed shaped opening.
Applications:
Manufactured Products:>
Expanded Metals
Product Shortname: XPM
Sizes Available:
Mesh
Reference
10 x 6
12.5 x 6
20 x 6
30 x 12
30 x 12
30 x 12
30 x 12
40 x 18
40 x 18
50 x 24
50 x 24
50 x 24
50 x 24
75 x 36
75 x 36
200 x 75
Opening
mm
7x4
10 x 5
15 x 5
27 x 9
27 x 9
27 x 9
27 x 9
35 x 14
35 x 14
43 x 18
43 x 18
43 x 18
43 x 18
67 x 30
67 x 30
175 x 70
Thickness
mm
0.8
1.0
1.0
1.0
1.0
1.2
1.6
1.2
1.6
1.6
1.6
2.0
3.0
2.0
3.0
3.0
Strand
mm
1.2
1.2
1.7
1.7
2.5
2.2
3.0
2.0
3.0
2.0
3.0
3.0
3.5
3.0
4.0
7.5
Sheet Size
mm
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 1800
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
Weight
kg/sheet
7.4
9.2
13.0
6.5
7.2
10.1
18.4
6.1
12.3
6.1
9.2
11.5
22.0
7.7
15.4
15.0
% Open
Area
60
60
45
71
58
65
50
78
67
83
75
75
71
83
78
80
19 x 7
19 x 7
28 x 9
28 x 9
28 x 9
30 x 12
30 x 12
30 x 12
30 x 12
38 x 15
38 x 15
38 x 15
50 x 19
50 x 19
50 x 19
60 x 25
60 x 25
76 x 38
76 x 38
76 x 38
14 x 5
14 x 4
22 x 7
20 x 6
19 x 5
24 x 10
23 x 9
23 x9
22 x 9
31 x 14
30 x 13
29 x 12
40 x 20
40 x 18
37 x 16
50 x 21
48 x 19
62 x 28
62 x 28
60 x 25
0.8
1.0
1.0
1.6
1.6
1.0
1.2
1.6
2.0
1.0
1.6
2.0
1.6
2.0
3.0
1.6
2.0
2.0
3.0
3.0
1.0
1.7
1.5
1.6
2.2
1.5
2.2
2.2
2.2
2.0
2.0
2.7
2.1
2.7
3.9
2.2
2.8
2.9
3.5
4.5
1200 x 1200
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1200 x 2400
1.8
3.7
2.7
4.4
6.2
1.9
3.3
4.4
5.5
1.8
3.3
5.1
2.3
3.8
8.3
2.2
3.5
2.7
5.0
6.7
75-80
60-73
78-89
48-56
48-56
81-87
68-78
67-75
64-71
68-74
68-78
68-74
81-87
77-81
67-74
82-87
73-80
81-84
76-81
75-79
Manufactured Products:>
Grating
Product Shortname:
GRATE
Specifications:
Australia AS3679-250
British
BS4360-43A
American ASTM A36
General Information:
Grating is constructed of various size load bearings with 6mm square twisted cross rods
forge welded to the upper edge of the load bars. A strong forge weld is achieved by the
simultaneous application of electrical current and hydraulic pressure at the intersection
point of each load bar and cross rod. This process produces an open web of steel capable of
supporting loads. Because of its 80% open area, grating is easy to clean, allowing for other
structures to be directly added to it, and permitting free passage of light and maximum air
circulation.
Availability:
Grating is manufactured in numerous combinations of load bar depth and thickness, load bar
pith and cross rod pitch.
Plain
Supplied with plain load bearing bars and 6mm twisted cross rods.
Serrated
Available with most standard load bearing bars, the serrations are formed by placing
a series of notches along the upper edge of the load bar, thus enhancing the non-slip
characteristics of the grating.
Standard sheet size is 6100mm by 900mm.
Other sizes available on request.
Finishes Available:
For more detailed information regarding grating contact your local Easysteel branch.
Manufactured Products:>
Perforated Sheet
General Information:
Applications:
Sunscreens, balustrades, security screens, shopfitting and display, furniture, ceiling tiles,
filtration, silencers, heating and ventilating, airconditioning grills, electrical components, food
processing, agriculture and seed cleaning screens.
Sizes Available:
Standard sheet sizes are generally 2400 x 1200 and are available in a variety of thicknesses
ranging from 0.5mm to 6.0mm. Sheet thickness largely depends on the type of material and
perforation pattern.
Patterns Available:
A large range of standard perforations are available ex our suppliers stock. Non-standard
perforations may be manufactured to customer specification.
Manufactured Products:>
Plank
Plank has been designed to provide a non-skid surface and easy cleaning to meet
stringent hygienic conditions.
Main Attributes:
Rigidity
Maximum strength for minimum weight with fewer supporting members required
Hygiene
Round raised studded holes prevent dirt traps, flushing away of dirt and offal is made easy
Safety
Slipping in either direction is eliminated due to the raised holes
Applications:
Catwalks, stair treads, mezzanine floors, walkways, drain covers, loading platforms, freezing
works, dairy and paint factories.
Specifications:
Mild Steel
Stainless Steel
Aluminium
5.4
5.6
2.7
8.1
6.0
3.2
All dimensions in mm
C
r
56
29
56
29
56
28
47.5
28.5
47.5
29
47.5
28
t
2.0
2.0
3.0
2.5
2.0
3.0
10.2
300
47.5
3.0
Mass
kg/m
28
Manufactured Products:>
Stud Plank
Australian registered design No. 9265/84.
New Zealand registered design No. 19135.
(All measurements in mm)
General Information:
Stud plank is available in standard lengths of 3 metres. Non standard lengths can be
manufactured to order.
Stud plank stair treads are available in lengths of 618mm, 737mm and 916mm.
One stair tread unit consists of:2 end brackets; 4 coach bolts (M10 x 20);
4 flat washers; 4 spring washers; 4 nuts
Main Attributes:
Rigidity
Maximum strength for minimum weight with fewer supporting members required
Hygiene
Round raised studs and large drain holes prevent dirt traps and allow easy
flushing away of dirt and offal
Safety
Slipping in either direction is eliminated due to the raised holes
Comfort
Loads are easily distributed creating a live surface to cushion workers movements thereby
reducing muscular strain, conserving energy and increasing productivity.
Applications:
For applications in mining, timber mills, oil storage, fertiliser plants, power stations etc.
Where rigidity, ease of maintenance, safety and comfort are required.
Specifications:
Materials
2.0mm mild steel to AS1204.250 in pre-galvanised to Z275 zinc coating thickness. 2.5mm
mild steel to AS1204.250 in natural finish or Hot Dipped Galvanised to AS/NZS 4680-1999.
Manufactured Products:>
Safe-T-Perf
NON-SLIP SHEETS
General Information:
SAFE-T-PERFs precise configuration, flanged circular perforation ensures a reliable nonslip surface - non-slip in all directions - even when wet and greasy. Safe-T-Perf gives
confidence, minimises risk, ensures a dependable grip and promotes safety.
Can be made to customer requirements.
Main Attributes:
Rigidity
Maximum strength for minimum weight with fewer supporting members required
Hygiene
Round raised studded holes prevent dirt traps, flushing away of dirt and offal is made easy
Safety
Slipping in either direction is eliminated due to the raised holes
Applications:
The reliable, effective non-slip product for floors, platforms, ramps, cat-walks, stairways,
vehicle steps, scaffolding and livestock transport floors. Wherever safe walking is vital.
Specifications:
Mild Steel
Stainless Steel
Aluminium
Manufactured Products:>
Handrail System
Specifications:
General Information:
Finishes Available:
Untreated steel, stainless steel or powder coated finishes are available on request. Standard
product is hot dipped galvanised to AS 1650-1989, ensuring that after installation, the
monowills handrail system is maintenance-free.
Applications:
It has been designed to suit New Zealand conditions and specifications and can be used
anywhere railing is required on stairways, ramps, platforms, fire escapes, bridges, boats,
factories, marina and farms.
Welding Products:>
Welding Products:>
Mild Steel Electrodes
Product Shortname: GP
PH28 E4112-0, E6013, AC 50V / DC-
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
2.5
70-100
2.5
159
3.2
85-135
5.0
164
4.0
130-170
5.0
104
5.0
190-230
5.0
53
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
2.5
70-100
2.5
158
3.2
90-135
5.0
158
4.0
130-180
5.0
105
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
2.5
60-95
2.5
172
3.2
70-125
5.0
163
4.0
130-170
5.0
109
5.0
170-240
5.0
72
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
3.2
90-140
5.0
148
4.0
120-190
5.0
99
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
2.5
90-140
2.5
97
3.2
130-160
5.0
91
4.0
180-210
5.0
54
5.0
260-320
5.0
32
Welding Products:>
Low Hydrogen Electrodes
Product Shortname: LOHY
PH56S E4816-4H5, E7016-H8, AC 70V OR DC +/-
AuSTARC 16TC
E4816-4H10, E7016 H8, AC45(2.5, 3.2)
AC55 (4.0, 5.0, 6.0) DC+
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
2.5
60-100
2.2
131
3.2
85-140
5.0
151
4.0
100-180
5.0
99
5.0
180-230
5.0
56
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
2.5
60-90
2.5
147
3.2
90-135
5.0
148
4.0
140-190
5.0
90
5.0
190-240
5.0
49
6.0
250-310
5.0
35
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
2.5
60-105
2.2
107
3.2
90-145
5.0
126
4.0
140-200
5.0
87
5.0
180-300
5.0
48
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
4.0
200-230
5.0
42
5.0
260-340
5.0
28
6.0
360-440
5.0
20
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
3.2
90-140
5.0
122
4.0
110-180
5.0
86
5.0
170-240
5.0
45
PH118
E7618-N4M2-A H5, E11018G-H4, AC 70V OR DC+
Type PH118 is designed for welding low alloy high strength
steels with tensiles up to 120,000 psi, ie: Bisalloy 80, Sumiten
80S, TI, and 4140. In addition 118 is ideal for many repair
welds on high strength steels, ie: forklift prongs, axles shafts
etc. ABS Approved. These electrodes must be kept dry.
Welding Products:>
Hard Facing Electrodes
Product Shortname: phfa
ph400 1435-a4, e fe 2, AC 50V OR DC+/-
PH600
1855-A4, E fe 3, AC 50V or DC+/-
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
3.2
95-145
5.0
127
4.0
125-200
5.0
68
5.0
190-280
5.0
46
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
3.2
95-145
5.0
133
4.0
125-180
5.0
67
5.0
190-280
5.0
45
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
2.5
40-100
2.5
141
3.2
60-120
2.5
76
4.0
90-160
2.5
51
5.0
130-200
2.5
34
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
2.0
25-60
2.5
223
2.5
40-80
2.5
138
3.2
60-100
2.5
78
4.0
90-140
2.5
50
Welding Products:>
Elite Range for Repairs & Maintenance
Product Shortname: CAST
SuPERCAST NI
AWS A5. 15:ENi-Cl, AC 45 or DC-
SuPERCAST NI/FE
AWS A5. 15:ENiFe-Cl, AC 45 or DC-
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
3.2
50-100
2.5
92
4.0
80-130
2.5
60
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
3.2
50-100
2.5
97
4.0
80-130
2.5
62
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
151
2.5
40-75
2.5
3.2
75-125
2.5
81
4.0
90-140
2.5
54
Size
(mm)
Amps
Range
Pkt (kg)
Pkt/Ctn
Rods/Pkt
143
2.5
40-75
2.5
3.2
60-100
2.5
78
4.0
90-140
2.5
51
Welding Products:>
CO2 Mig Wire
Product Shortname: MIGW
ES PZ6000
AWS A5. 18:ER70S-6 - POLARITY DC+
ELITE
aws a5. 18:er70s-6 - Polarity dc+
Size (mm)
Sold per
Spools/
Pallet
0.8
15
spl
75
0.9
15
spl
75
1.0
15
spl
75
Size (mm)
Sold per
Spools/
Pallet
0.6
spl
0.8
spl
0.8
15
spl
72
0.9
spl
0.9
15
spl
72
1.0
15
spl
72
1.2
15
spl
72
1.6
15
spl
72
Size (mm)
Sold per
Spools/
Pallet
1.0
15
spl
72
1.2
15
spl
72
1.6
15
spl
72
Welding Products:>
Self Shielded Fluxcored Mig Wire
Product Shortname: SCWI
FABSHIELD 21B AWS A5.20, Class E71T-11
Size (mm)
Sold per
0.9
4.5
spl
1.2
4.5
spl
1.2
15
spl
1.7
15
spl
2.0
15
spl
Sold per
0.8
0.9
spl
0.8
4.54
spl
Available on indent
FABSHIELD 23
AWS A5. 20, Class E71T-GS
Size (mm)
0.9
0.9
spl
0.9
4.54
spl
0.9
15
spl
Size (mm)
Sold per
1.0
15
spl
1.2
15
spl
Available on indent
Consumables:>
Consumables:>
Cutting and Grinding Discs
Product Shortname: DISO, DISC
Fletcher Easysteel stocks the below range of Cutting and Grinding Discs. Hard wearing, durable and low cost, enquire at your
Fletcher Easysteel sales centre today.
CuT OFF DISCS
OD
thickness
centre
115
2.0
22.23mm
125
2.0
22.23mm
180
2.5
22.23mm
230
2.5
22.23mm
300
3.0
25.4mm
350
3.0
25.4mm
400
3.0
25.4mm
GRINDING DISCS
OD
thickness
centre
100
5.0
16mm
115
6.0
22.23mm
125
6.0
22.23mm
180
6.0
22.23mm
230
6.0
22.23mm
Consumables:>
Wire Wheels
Product Shortname: WBRH
Spindle Mounted Wire Wheels
Wheel (mm)
Cup (mm)
50 x 6
50 x 6
75 x 6
75 x 6
100 x 6
Wire Brushes
Product Shortname: WBRH
Wire Cup Brushes
Crimped
T/Knot
75 x M10 x 1.5
75 x M10 x 1.5
75 x M10 x 1.25
75 x M10 x 1.25
75 x M14 x 2.0
75 x M14 x 2.0
Crimped
T/Knot
75 x 16 x 13
15 x 22
150 x 25 x 25
200 x 25 x 25
250 x 30 x 25
300 x 30 x 25
Twist Knot Wire Brushes
100 x M10 x 1.5
100 x M14 x 2
115 x M14 x 2
125 x M14 x 2
Consumables:>
Sanding Sheets
Waterproof Sheets 230 x 280mm
Grit (G)
80
100
120
150
180
220
240
Grit (G)
400
600
800
1000
1200
1500
2000
280
320
Fibre Discs
Product Shortname: DISF
Disc Size
(mm)
Grit (G)
16
24
36
50
60
80
100
120
100 x 16
115 x 22
127 x 22
178 x 22
240
320
Engineers Rolls
Product Shortname: ENGR
Engineers Rolls 38mm x 50m
Grit (G)
40
60
80
100
120
150
180
Service Centres:>
Service Centres:>
Service Centres
Company Organisation:
Sales
Centre
Distribution
Centre
Coil
Processing
Plate
Processing
Guillotining
North Island
Whangarei
Auckland
Hamilton
Tauranga
Rotorua
New Plymouth
Hawkes Bay
Palmerston
North
Wellington
Auckland
Auckland
Auckland
Auckland
South Island
Nelson
Christchurch
Dunedin
Invercargill
Christchurch
Christchurch
Christchurch
Service Centres:>
Plate Processing
Fletcher Easysteels Easycut Profiling operations
provide the largest and most efficient plate cutting
facilities in New Zealand. Whether your requirements
are for mild steel, boiler quality or high strength plate
we can cut your plate to meet your requirements. A
list of services are offered below:
The 260 amp top of the line high definition
Kinetic plasma machines in Auckland and
Christchurch can cut plate up to 40mm thick.
Fletcher Easysteel offer a range of services from
drilling and tapping through to beveling and weld
prep saving our customers time and money.
The Dycon 300 tonne numerically controlled press brake at our Auckland facility has a computer controlled automatic
backstop and can press up to nine different folds per plate, all with repetitive folds.
An integral part of the plate processing is the latest in software in our CAD department to quickly and efficiently nest your
designs and shapes at minimal cost and waste. All drawings are held in memory allowing repeat orders to be recalled
immediately.
Gas Cutting
Thicknesses
2mm - 40mm
10mm - 257mm
Grades
Beveling
Drilling
Tapping
Tolerances
Guillotining
300T Pressbrake
2.5mm - 12mm
up to 12mm
Service Centres:>
Metal Processing
Sheet and Coil
Processing:
In order to cater for specialist requirements of the New Zealand manufacturing industry
and expand services available, Fletcher Steel offers a Service Centre operation with some of
the latest metal processing technology and equipment available in New Zealand.
With Coil processing equipment in Auckland and Christchurch the facilities are available to
slit, sheet, blank and guillotine, both ferrous and
non-ferrous metals to exacting standards
Machine Capabilities:
AUCKLAND
CHRISTCHURCH
Maximum Width
1525mm
1350mm
Minimum Width
16mm
25mm
Thickness Range
0.4 - 2.3mm
Maximum Width
1828mm
1250mm
Minimum Width
76mm
<1mm 127mm
200mm
Thickness Range
Slitting
>
Guillotines
Minimum Width
28mm
Maximum Length
2400mm
Thickness Range
0.4 - 3.2mm
Conversion Tables:>
Useful Tables Weights - Kg/Metre
ROUND BARS:
Metric Size
mm
Imperial
Equivalent
Size inch
kg/m
Metric Size
mm
Imperial
Equivalent
Size inch
kg/m
3
3.175
4
4.762
5
6
6.350
7.937
8
9.525
10
11.112
12
12.700
13
14
14.287
15.875
16
17
17.462
19
19.050
20
20.637
22
22.225
0.1181
1
/8
0.1575
3
/16
0.1969
0.2362
1
/4
5
/16
0.3150
3
/8
0.3937
7
/16
0.4724
1
/2
0.5118
0.5512
9
/16
5
/8
0.6299
0.6693
11
/16
0.7480
3
/4
0.7874
13
/16
0.8661
7
/8
0.056
0.062
0.099
0.140
0.154
0.222
0.247
0.388
0.395
0.559
0.617
0.761
0.888
0.994
1.042
1.208
1.259
1.554
1.578
1.782
1.880
2.226
2.237
2.466
2.626
2.984
3.045
23.812
24
25
25.400
28
28.575
30
31.750
32
33
34.925
35
38.100
40
41.275
44.450
45
47.625
50
50.800
53.975
55
57.150
60
60.325
63.500
65
/16
0.9449
0.9843
1
1.1024
11/8
1.1811
11/4
1.2598
1.2992
13/8
1.3780
11/2
1.5748
15/8
13/4
1.7717
17/8
1.9685
2
21/8
2.1654
21/4
2.3622
23/8
21/2
2.559
0.274
0.428
0.616
0.840
1.096
1.388
1.712
19.05
20.64
20.83
22.22
23.37
25.40
26.99
/4
/16
0.820
7
/8
0.920
1
11/16
15
Metric Size
mm
Imperial
Equivalent
Size inch
kg/m
3.496
3.551
3.853
3.978
4.834
5.034
5.549
6.215
6.313
6.714
7.520
7.553
8.950
9.865
10.504
12.181
12.485
13.984
15.413
15.911
17.962
18.650
20.137
22.195
22.436
24.861
26.049
69.850
70
75
76.200
80
82.55
88.90
90
100
101.60
105
110
114.30
120
127.0
130
140
150
152.40
160
180
200
210
220
230
250
2 /4
2.756
2.953
3
3.149
31/4
31/2
3.543
3.937
4
4.134
4.331
41/2
4.724
5
5.118
5.512
5.905
6
6.299
7.086
7.874
8.267
8.661
9.055
9.842
30.081
30.120
34.680
35.799
39.458
42.013
48.726
49.939
61.654
63.642
67.973
74.601
80.547
88.781
99.441
104.19
120.84
138.72
143.19
157.83
199.75
246.61
271.89
298.40
326.14
385.33
2.466
2.894
2.948
3.358
3.711
4.386
4.946
28.57
31.75
34.92
38.10
47.24
52.07
11/8
11/4
13/8
11/2
1.860
2.050
5.550
6.853
8.292
9.868
15.166
18.379
HEXAGON BARS:
6.35
7.94
9.52
11.11
12.70
14.29
15.87
/4
/16
3
/8
7
/16
1
/2
9
/16
5
/8
1
13
To calculate the weights of Bright Steel Bars in kg/metre, use the following formulae:Hexagons - (size a/f in mm)2
x .006798
= weight per metre in kilograms
Squares
- (size a/f in mm)2
x .00785
= weight per metre in kilograms
x .006165
= weight per metre in kilograms
Rounds
- (Diameter in mm)2
Flats
- Width in mm x thickness in mm x .00785
= weight per metre in kilograms.
Conversion Tables:>
Approx. Comparison of Tensile Strength*
tons/in2
p.s.i
kg/mm2
N/mm2
or MPa
16
20
23
26
29
30
32
33
35
36
39
40
42
45
46
49
50
52
55
58
60
62
65
68
70
71
75
78
37,000
45,000
51,500
58,000
65,000
67,000
72,000
74,000
78,500
81,000
87,500
90,000
94,000
101,000
103,000
110,333
112,000
116,500
123,000
130,000
134,500
139,000
146,000
153,000
157,000
159,000
168,000
175,000
25.8
31.6
36.5
40.8
45.7
47.1
50.6
52.0
55.5
57.0
61.8
63.3
66.0
71.0
72.5
77.3
78.75
82.0
86.5
91.4
94.5
97.7
102.6
107.5
110.4
111.8
118.0
123.0
250
309
355
402
448
463
494
510
541
556
602
618
649
695
710
757
772
803
849
896
927
957.5
1004
1050
1081
1097
1158
1205
tons/in2
p.s.i
kg/mm2
N/mm2
or MPa
80
81
84
85
88
90
91
94
95
97
100
104
105
107
110
113
115
117
120
123
125
126
130
133
135
136
140
180,000
182,000
188,000
190,000
197,000
202,000
204,000
210,000
213,000
217,000
224,000
233,000
235,000
240,000
246,500
253,000
257,600
262,000
269,000
275,500
280,000
282,500
291,000
298,000
302,400
304,500
313,600
126.0
128.0
132.2
133.6
138.5
142.0
143.4
148.4
149.7
152.6
157.5
163.8
165.4
168.5
173.2
178.0
181.1
184.3
189.0
194.0
197.0
198.0
205.0
209.0
213.0
214.0
221.0
1236
1251
1297
1313
1359
1390
1405
1452
1467
1498
1544
1606
1622
1653
1699
1745
1776
1807
1853
1900
1931
1946
2000
2054
2085
2010
2162
*A Guide Only
Metric to Gauge
Gauge Number
10
12
14
16
18
20
22
24
26
28
3.50
3.00
2.50
2.00
1.60
1.20
1.00
0.80
0.60
0.50
0.40
3.45
2.95
2.45
1.95
1.55
1.15
0.95
0.75
0.55
0.45
0.35
Conversion Tables:>
2392
2261
2158
2058
1962
1893
1817
1738
1665
1586
1513
1461
1391
1330
1271
1220
1175
1133
1097
1062
1029
1001
975
949
923
896
873
*A Guide Only
Tensile
Strength
in MPa
Tensile
Strength
in MPa
68.0
65.3
63.3
61.7
60.0
58.7
57.3
56.0
54.7
53.5
52.1
51.0
49.6
48.5
47.1
45.7
44.5
43.1
41.8
40.4
39.1
37.9
36.6
35.5
34.3
33.1
32.1
30.9
29.9
28.8
27.6
26.6
Rockwell Hardness
No. C-Scale
150kg Load
Brale Penetrator
Rockwell Hardness
No. C-Scale
150kg Load
Brale Penetrator
(110.0)
(109.0)
(108.5)
(108.0)
(107.5)
(107.0)
(106.0)
(105.5)
(104.5)
(104.0)
(103.0)
B-Scale 100kg
Load 1/16
dia. Ball
B-Scale 100kg
Load 1/16
dia. Ball
940
840
780
737
697
667
640
615
591
569
547
528
508
491
472
455
440
424
410
396
383
372
360
349
339
328
319
309
301
292
284
276
Diamond Pyramid
Hardness No.
Diamond Pyramid
Hardness No.
682
653
627
601
578
555
534
514
495
477
461
444
429
415
401
388
375
363
352
341
331
321
311
302
293
285
277
269
262
Brinell Hardness
No. 10mm ball
3000kg Load
Brinell Hardness
No. 10mm ball
3000kg Load
255
248
241
235
229
223
217
212
207
201
197
192
187
183
179
174
170
167
163
159
156
152
149
146
143
140
137
134
131
128
126
269
261
253
247
241
234
228
222
218
212
207
202
196
192
188
182
178
175
171
167
163
159
156
153
150
146
143
140
137
134
132
(102.0)
(101.0)
100.0
99.0
98.2
97.3
96.4
95.5
94.6
93.8
92.9
91.8
90.7
90.0
89.0
87.8
86.8
86.0
85.0
83.8
82.9
81.7
80.8
79.8
78.7
77.6
76.4
75.2
74.0
72.7
72.0
25.4
24.2
22.8
21.7
20.5
(18.8)
(17.5)
(16.0)
(15.2)
(13.8)
(12.7)
(11.5)
(10.0)
(9.0)
(8.0)
(6.4)
(5.4)
(4.4)
(3.3)
(2.1)
(0.9)
-
849
826
803
783
764
742
722
706
691
672
658
642
625
612
599
583
570
560
546
535
526
514
504
495
485
475
464
455
446
437
431
Special Steels:>
Special Purpose Steels
Fletcher Easysteel stocks a wide range of specialist products to ensure we can offer the
most comprehensive range to all users.
Stocks include:
Free Cutting
High Tensile
Hard Chrome Bar
Case Hardening
Cast Iron
This list is only an indication of the stock available. The broad range and depth of products we are committed to stocking
requires a separate catalogue for this product group.
The SPECIAL STEEL BOOK is available from your local Fletcher Easysteel sales centre.
For all special steels, we offer a comprehensive cutting service. Fletcher Easysteel has the ability to quickly and accurately cut
your specific requirements within close limits of tolerance.
Indent service
Fletcher Easysteel also offers an indent service on all special purpose steels from a global network of traders, merchants and
mills, depending on your quality and delivery requirements.
Appendix:>
Appendix
conversion factors
General:
Services:>
Indent
Indent Sourcing
For products and quantities outside our stocking policy, Fletcher Easysteel has many
years of experience in sourcing a comprehensive range of steel and related products
for our customers. The resulting well established channels, relationships with suppliers,
and collective purchasing leverage means Fletcher Easysteel is well positioned to cater for
your indent requirements.
Further, our ability to co-ordinate indent orders in a centralised operation ensures excellent
service at all times.
Please contact your local Easysteel Sales Centre with your enquiry.