Académique Documents
Professionnel Documents
Culture Documents
contents
SBB Beam
(Standard Bridge Beam) profile span range (in metres)
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
p 4-5
typical applications:
Ideal for short span bridges and commercial developments.
advantages:
Provides a closely assembled soffit and less insitu concrete. No need for formwork. Can be readily designed for continuity.
T Beam
typical applications:
Short and medium span bridges and commercial developments.
advantages:
Provides a closely assembled soffit. No need for formwork.
TY Beam
typical applications:
Short and medium span bridges, commercial developments, jetties and marine decks.
advantages:
Provides a closely assembled soffit with lower number of beams required and less insitu concrete. No need for formwork.
TYE Beam
typical applications:
Complementary edge beam to the TY beam.
advantages:
Can be used for a solid infill deck. Increased section properties to support parapet loading.
advantages:
The beams are spaced apart, facilitating easy access to the underside of the structure.
advantages:
Can be used for beam and slab construction. Increased section properties to support parapet loading.
2
Y Beam
typical applications:
Medium and long span bridges and commercial developments.
advantages:
The beams are spaced apart, facilitating easy access to the underside of the structure.
YE Beam
typical applications:
Complementary edge beam to the Y beam.
advantages:
Can be used for either a solid infill deck or beam and slab construction. Increased section properties to support parapet loading.
M Beam
typical applications:
Provides voided bridge deck for medium and long span road bridge construction.
advantages:
Closed soffit to underside ideal for pseudo-box type construction.
UM Beam
typical applications:
Complementary edge beam to the M beam.
advantages:
Provides a clean vertical face with a variety of finishes along with a channel void for incorporation of services.
advantages:
Provides a quick, safe working platform.
U Beam
typical applications:
Medium and long span bridges.
advantages:
Suitable for skew decks where torsion is high. Provides a ready made edge detail and easy provision for services.
SY Beam
typical applications:
Longer spans. Major motorway schemes.
advantages:
Provides a practical and economical solution for spans up to 40 metres.
SBB Beam
T Beam
TY Beam
TYE Beam
10
12
14
Y Beam
16
YE Beam
18
M Beam
20
UM Beam
22
24
U Beam
26
SY Beam
28
For additional information on Tarmacs precast products please contact us on the number below. Other technical information for each individual precast unit is available for the following products: retaining walls, bulk storage units and safety barriers box culverts double tee beams tunnel segments thermocast Literature covering our full range of products for specific industry sectors is available on request. rail roads sports and leisure water commercial
Tarmac and the T mark are registered trademarks of the Tarmac Group.
Although Tarmac Limited does its best to ensure that any advice, recommendations or information it may give is accurate, no liability or responsibility of any kind (including liability for negligence) is accepted in this respect by Tarmac Limited, its staff or agents. Claims and statements made by Tarmac Limited regarding its products refer to those which have been properly handled on site. Tarmac Limited cannot accept any liability or responsibility of any kind (including liability for negligence) for problems caused by the acts or omissions of third parties or by poor site practices.
30 30