Académique Documents
Professionnel Documents
Culture Documents
AIR POLLUTION
It is an atmospheric condition in which certain substances (including the normal constituents in excess) are present in concentrations which can cause undesirable effects on man and his environment. These substances include gases, particulate matter, radioactive substances etc. Gaseous pollutants include oxides of sulphur (mostly SO2, SO3) oxides of nitrogen (mostly NO and NO2 or NOx), carbon monoxide (CO), volatile organic compounds (mostly hydrocarbons) etc. Particulate pollutants include smoke, dust, soot, fumes, aerosols, liquid droplets, pollen grains etc. Radioactive pollutants include radon222, iodine-131, strontium- 90, plutonium-239 etc. WHAT CAUSES AIR POLLUTION? Air pollution may be caused by various natural and anthropogenic processes. Below are listed some of the main air pollution causes. NATURAL: Volcanic activities volcanic eruptions emit a serious of toxic gases (including sulfur and chlorine) as well as particulate matter (ash particles) but are usually restricted to localized areas; Winds and air currents can mobilize pollutants from the ground and transport them over large areas; Wildfires add to the atmosphere smoke, carbon monoxide as well as particulate matter (containing organic contaminants such as PAHs) and could affect significant areas although in general are restricted and may be contained; Microbial decaying processes microorganisms which are present in any environment have a major role in natural decaying processes of living organisms as well as environmental contaminants; this activity results in the natural release of gases especially methane gas; Radioactive decay processes for example radon gas is emitted due to natural decay processes of Earths crust which as potential to accumulate in enclosed spaces such as basements; Increasing temperatures contribute to an increase in the amounts of contaminants volatilizing from pollution soil and water into air.
ANTHROPOGENIC: Mining and smelting emit into the air a variety of metals adsorbed on particulate matter that is suspended in the air due to crushing & processing of mineralogical deposits;
Mine tailing disposal due to their fine particulate nature (resulting after crushing and processing mineral ores) constitute a source of metals to ambient air which could be spread by wind over large areas; Foundry activities emit into the air a variety of metals adsorbed on particulate matter that is suspended in the air due to processing of metallic raw materials (including the use of furnaces); Various industrial processes may emit both organic and inorganic contaminants through the following mechanisms: Accidental spills and leaks of stored chemicals Handling and storage of chemicals especially of volatile inorganic chemicals Transportation emits a series of air pollutants (gases including carbon monoxide, sulfur oxides and nitrogen odides - and particulate matter) through the tailpipe gases due to internal combustion of various fuels (usually gases such as opxides of carbons, of sulfur, of nitrogen, as well as organic chemicals as PAHs) Construction and Demolition activities pollute the air with various construction materials. Of special threat is the demolishion of old buildings which may contain a series of banned chemicals such as PCBs, PBDEs, asbestos. Coal Power Plants by burning coal they may emit a series of gases as well as particulate matter with metals (such as As, Pb, Hg) and organic compounds (especially PAHs); Heating of buildings emits a series of gases and particulate matters due to burning of fossil fuels; Waste Incineration depending on waste composition, various toxic gases and particulate matter is emitted into the atmosphere; Agriculture pollute the air usually through emissions of ammonia gas and the application of pesticides/herbicdes/insecticides which contain toxic volatile organic compounds; Military activities may introduce toxic gases through practices and training; Smoking emits a series of toxic chemicals including a series of organic and inorganic chemicals, some of which are carcinogenic;
Effects of air pollution: Air pollution has adverse effects on living organisms and
materials. Effects on Human Health: Human respiratory system has a number of mechanisms for protection from air pollution. Bigger particles (> 10 m) can be trapped by the hairs and sticky mucus in the lining of the nose. Smaller particles can reach tracheobronchial system and there get trapped in mucus. They are sent back to throat by beating of hair like cilia from where they can be removed by spitting or swallowing. Years of exposure to air pollutants (including cigarette smoke) adversely affect these natural defenses and can result in lung cancer, asthma, chronic bronchitis and emphysema (damage to air sacs leading to loss of lung elasticity and acute shortness of breath). Suspended particulates can
cause damage to lung tissues and diseases like asthma, bronchitis and cancer especially when they bring with them cancer causing or toxic pollutants attached on their surface. Sulphur dioxide (SO2) causes constriction of respiratory passage and can cause bronchitis like conditions. In the presence of suspended particulates, SO2 can form acid sulphate particles, which can go deep into the lungs and affect them severely. Oxides of nitrogen especially NO2 can irritate the lungs and cause conditions like chronic bronchitis and emphysema. Carbon monoxide (CO) reaches lungs and combines with haemoglobin of blood to form carboxyhaemoglobin. CO has affinity for haemoglobin 210 times more than oxygen. Haemoglobin is, therefore, unable to transport oxygen to various parts of the body. This causes suffocation. Long exposure to CO may cause dizziness, unconsciousness and even death. Many other air pollutants like benzene (from unleaded petrol), formaldehyde and particulates like polychlorinated biphenyls (PCBs) toxic metals and dioxins (from burning of polythene) can cause mutations, reproductive problems or even cancer. Effects on Plants: Air pollutants affect plants by entering through stomata (leaf pores through which gases diffuse), destroy chlorophyll and affect photosynthesis. Pollutants also erode waxy coating of the leaves called cuticle. Cuticle prevents excessive water loss and damage from diseases, pests, drought and frost. Damage to leaf structure causes necrosis (dead areas of leaf), chlorosis (loss or reduction of chlorophyll causing yellowing of leaf) or epinasty (downward curling of leaf), and abscission (dropping of leaves). Particulates deposited on leaves can form encrustations and plug the stomata. The damage can result in death of the plant. Effects on aquatic life: Air pollutants mixing up with rain can cause high acidity (lower pH) in fresh water lakes. This affects aquatic life especially fish. Some of the freshwater lakes have experienced total fish death. Effects on materials: Because of their corrosiveness, particulates can cause damage to exposed surfaces. Presence of SO2 and moisture can accelerate corrosion of metallic surfaces. SO2 can affect fabric, leather, paint, paper, marble and limestone. Ozone in the atmosphere can cause cracking of rubber. Oxides of nitrogen can also cause fading of cotton and rayon fibres.
Control of Air Pollution: - Air pollution can be minimized by the following methods:
1. 2. 3. 4. 5. Siting of industries after proper Environmental Impact Assessment studies. Using low sulphur coal in industries Removing sulphur from coal (by washing or with the help of bacteria) Removing NOx during the combustion process. Removing particulate from stack exhaust gases by employing electrostatic precipitators, bag-house filters, cyclone separators, scrubbers etc. 6. Vehicular pollution can be checked by regular tune-up of engines ; replacement of more polluting old vehicles; installing catalytic converters ; by engine modification to have fuel efficient (lean) mixtures to reduce CO and
hydrocarbon emissions; and slow and cooler burning of emission (Honda Technology). 7. Using mass transport system, bicycles etc. 8. Shifting to less polluting fuels (hydrogen gas). 9. Using non-conventional sources of energy. 10. Using biological filters and bio-scrubbers. 11. Planting more trees
Greenhouse effect:The greenhouse effect is an increase in the temperature of a planet as heat energy from sunlight is trapped by the gaseous atmosphere. Excess carbon dioxide and water vapor increase this global warming effect. Solar Energy (sunlight) is short-wavelength radiation which easily penetrates the Earth's atmosphere and warms the Earth; only about one quarter of incoming sunlight is reflected by the atmosphere. The warmed Earth emits longwavelength radiation (infrared waves or heat energy) back into space; these longer waves are mostly reflected back to Earth by the atmosphere. The size of the atmosphere in the illustration above is greatly exaggerated in order to show the greenhouse effect. Most of the Earth's atmosphere is within 10 miles (16 km) of the Earth's surface). Much of these harmful gases are produced either naturally or by various human activities; which we should reduce. Brief description and effects of six important greenhouse gases are given below: 1. Carbon dioxide (CO2) A naturally occurring gas produced by living organisms and fermentation. It is a normal component of the breath we exhale; it is hazardous in concentrated volumes. Large quantity of carbon dioxide is produced by the combustion of carbonaceous fuels. Carbon dioxide emissions from fuel burning, responsible for about 87 percent of global warming, have increased by about 27 percent since the industrial revolution. 2. Nitrogen oxides (NOx) Nitrogen oxides are naturally occurring from microbial action in soil. NOx is also produced by fuel burning. Scientists say its production is increased by the use of nitrogen based fertilizers in agriculture, as well as by the use of catalytic converters in automobiles. 3. Methane (CH4) Methane is a naturally occurring, in-flammable gas. Methane is produced by geological coal formations and by the decomposition of organic matters. Leading man-related sources of methane are landfills; livestock digestive processes and waste, especially ruminants (cud-chewing animals); and wetland rice cultivation. 4. Hydroflurocarbon gasses (HFCs) Chlorofluorocarbons (CFC), the coolant, cleaning, and propellant gases were blacklisted internationally due to its ozone-eating characteristics. HFCs do contribute to global warming. Global warming potential of HFCs is 4,000 to 10,000 times that of CO2.
5. Perfluorocarbons (PFC), or perflurocompounds Man-made replacement gases for CFCs but result also as a by-product of aluminium smelting. PFCs also used as a purging agent for semi-conductor manufacture and small amounts are produced during uranium enrichment processes. Global warming potential of Perfluorocarbons (PFC), or perflurocompounds is 6,000 to 10,000 that of CO2. 6. Sulfur hexafluoride (SF6) - Very low atmospheric concentration makes it an ideal test gas for gas concentration monitors. Principle uses: insulating material for highvoltage equipment like circuit breakers at utilities. Also used in water leak detection for cable cooling systems. SF6 is a man-made gas. Impacts of Enhanced Greenhouse Effect The enhanced greenhouse effect will not only cause global warming but will also affect various other climatic and natural processes. 1. Global temperature increase: It is estimated that the earth.s mean temperature will rise between 1.5 to 5.5C by 2050 if input of greenhouse gases continues to rise at the present rate. Even at the lower value, earth would be warmer than it has been for 10,000 years. 2. Rise in Sea Level: With the increase in global temperature sea water will expand. Heating will melt the polar ice sheets and glaciers resulting in further rise in sea level. Current models indicate that an increase in the average atmospheric temperature of 3C would raise the average global sea level by 0.2.1.5 meters over the next 50.100 years. One meter rise in sea level will inundate low lying areas of cities like Shanghai, Cairo, Bangkok, Sydney, Hamburg and Venice as well as agricultural lowlands and deltas in Egypt, Bangladesh, India, China and will affect rice productivity. This will also disturb many commercially important spawning grounds, and would probably increase the frequency of storm damage to lagoons, estuaries and coral reefs. In India, the Lakshadweep Islands with a maximum height of 4 meters above the level may be vulnerable. Some of the most beautiful cities like Mumbai may be saved by heavy investment on embankment to prevent inundation. Life of millions of people will be affected, by the sea level rise who have built homes in the deltas of the Ganges, the Nile, the Mekong, the Yangtze and the Mississippi rivers. 3. Effects on Human Health: The global warming will lead to changes in the rainfall pattern in many areas, thereby affecting the distribution of vector-borne diseases like malaria, filariasis, elephantiasis etc. Areas which are presently free from diseases like malaria, schistosomiasis etc. may become the breeding grounds for the vectors of such diseases. The areas likely to be affected in this manner are Ethiopia, Kenya and Indonesia. Warmer temperature and more water stagnation would favour the breeding of mosquitoes, snails and some insects, which are the vectors of
such diseases. Higher temperature and humidity will increase/aggravate respiratory and skin diseases. 4. Effects on Agriculture: There are different views regarding the effect of global warming on agriculture. It may show positive or negative effects on various types of crops in different regions of the world. Tropical and subtropical regions will be more affected since the average temperature in these regions is already on the higher side. Even a rise of 2C may be quite harmful to crops. Soil moisture will decrease and evapo-transpiration will increase, which may drastically affect wheat and maize production. Increase in temperature and humidity will increase pest growth like the growth of vectors for various diseases. Pests will adapt to such changes better than the crops. To cope up with the changing situation drought resistant, heat resistant and pest resistant varieties of crops have to be developed. Measures to Check Global Warming To slow down enhanced global warming the following steps will be important: 1. Cut down the current rate of use of CFCs and fossil fuel. 2. Use energy more efficiently. 3. Shift to renewable energy resources. 4. Increase Nuclear Power Plants for electricity production. 5. Shift from coal to natural gas. 6. Trap and use methane as a fuel. 7. Reduce beef production 8. Adopt sustainable agriculture. 9. Stabilize population growth. 10. Efficiently remove CO2 from smoke stacks. 11. Plant more trees. 12. Remove atmospheric CO2 by utilizing photosynthetic algae.
GLOBAL WARMING:Global Warming or Climate Change, measurable increases in the average temperature of Earths atmosphere, oceans, and landmasses. Scientists believe Earth is currently facing a period of rapid warming brought on by rising levels of heat-trapping gases, known as greenhouse gases, in the atmosphere. Greenhouse gases retain the radiant energy (heat) provided to Earth by the Sun in a process known as the greenhouse effect. Greenhouse gases retain the radiant energy (heat) provided to Earth by the Sun in a process known as the greenhouse effect. Greenhouse gases occur naturally, and without them the planet would be too cold to sustain life as we know it. Since the beginning of the Industrial Revolution in the mid-1700s, however, human activities have added more and
more of these gases into the atmosphere. For example, levels of carbon dioxide, a powerful greenhouse gas, have risen by 35 percent since 1750, largely from the burning of fossil fuels such as coal, oil, and natural gas. With more greenhouse gases in the mix, the atmosphere acts like a thickening blanket and traps more heat.
What is depleting the ozone layer? Chlorofluorocarbons (CFCs) account for approximately 80% of stratospheric ozone depletion. Other compounds that contribute to ozone depletion include: halons, carbon tetrachloride, methyl chloroform, hydrochlorofluorocarbons (HCFCs), and methyl bromide. These are known as industrial halocarbons. These compounds are used in refrigerators, furniture foam, fire extinguishers, etc. Human activities also contribute to the gradual disappearance of the ozone layer such as, deforestation, fertilizer use, and fossil fuel combustion. There are a couple of reasons why industrial halocarbons are very effective at ozone depletion. The first is the fact that they survive long enough to reach the stratosphere and second they help natural reactions that destroy ozone. Once in the stratosphere, UV-C radiation breaks up compounds releasing chlorine and bromine. Effects of Ozone Depletion Ozone depletion in the stratosphere will result in more UV radiation reaching the earth especially UV-B (290-320 nm). The UV-B radiations affect DNA and the photosynthetic chemicals. Any change in DNA can result in mutation and cancer.
Cases of skin cancer (basal and squamous cell carcinoma) which do not cause death but cause disfigurement will increase. Easy absorption of UV rays by the lens and cornea of eye will result in increase in incidents of cataract. Melanin producing cells of the epidermis (important for human immune system) will be destroyed by UV-rays resulting in immuno-suppression. Fair people (can.t produce enough melanin) will be at a greater risk of UV exposure. Phytoplanktons are sensitive to UV exposure. Ozone depletion will result in decrease in their population thereby affecting the population of zooplankton, fish, marine animals, in fact the whole aquatic food chain. Yield of vital crops like corn, rice, soybean, cotton, bean, pea, sorghum and wheat will decrease. Degradation of paints, plastics and other polymer material will result in economic loss due to effects of UV radiation resulting from ozone depletion.
Decrease in soil fertility and therefore decrease in the soil yield. How can one expect contaminated soil to produce healthy crops? Loss of soil and natural nutrients present in it. Plants also would not thrive in such soil, which would further result in soil erosion. Disturbance in the balance of flora and fauna residing in the soil. Increase in salinity of the soil, which therefore makes it unfit for vegetation, thus making it useless and barren. Generally crops cannot grow and flourish in polluted soil. Yet, if some crops manage to grow, they would be poisonous enough to cause serious health problems in people consuming them. Creation of toxic dust is another potential effect of soil pollution. Foul smell due to industrial chemicals and gases might result in headaches, fatigue, nausea, etc., in many people. Soil pollutants would bring in alteration in the soil structure, which would lead to death of many essential organisms in it. This would also affect the larger predators and compel them to move to other places, once they lose their food supply.
Reduce Toxic Waste: If one has to look at the soil pollution facts, it will be seen that toxic waste has a big role to play in soil pollution. Hence, industrial toxic waste should be treated to reduce its toxicity before it is disposed off. At the same time, responsible methods should be used for disposing off the waste. The best, however, is to avoid the use of harmful chemicals unless they are of extreme importance. Recycle Waste: Although a lot of propaganda has been carried out about recycling waste, not many measures have been taken about the same. If each family has to take it upon themselves to recycle waste, the land pollution caused due to landfills will be reduced considerably. The land so saved can be used constructively for a number of better tasks. Reuse: After plastic was invented, people thought it was convenient to opt for plastic containers, bags, etc., which could be disposed off after use. However, plastic is one of the main cause of soil pollution, as it takes a very long time to disintegrate. Therefore, people should consider shifting to reusable containers like glass, cotton bags, etc. Although paper does disintegrate faster, a lot of trees are cut for producing paper bags. Therefore, it is best to opt for cloth bags. Similarly, instead of using tissue papers in the kitchen, etc., one should opt using cloth napkins, handkerchief, etc. This will go a long way in reducing landfills. Opt for Organic Products: There is no doubt that the organic products are costly as opposed to the chemically grown products. But choosing the organic products will encourage more organic production. This will help in preventing soil pollution. Deforestation: To prevent soil pollution, deforestation measures have to be undertaken at rapid pace. Soil erosion is caused, when there are no trees to prevent the top layer of the soil from being transported by different agents of nature like water and air. At the same time, measures should be taken to avoid over cropping and over grazing, as it leads to flood and soil erosion and further deterioration of the soil layer.
What is Forest?
the forest is a complex ecosystem consisting mainly of trees that buffer the earth and support a myriad of life forms. The trees help create a special environment which, in turn, affects the kinds of animals and plants that can exist in the forest. Trees are an important component of the environment. They clean the air, cool it on hot days, conserve heat at night, and act as excellent sound absorbers. Plants provide a protective canopy that lessens the impact of raindrops on the soil, thereby reducing soil erosion. The layer of leaves that fall around the tree prevents runoff and allows the water to percolate into the soil. Roots help to hold the soil in place. Dead plants decompose to form humus, organic matter that holds the water and provides nutrients to the soil. Plants provide habitat to different types of organisms. Birds build their nests on the branches of trees, animals and birds live in the hollows, insects and other organisms live in various parts of the plant. They produce large quantities of oxygen and take in carbon dioxide. Transpiration from the forests affects the relative humidity and precipitation in a place.
anthropogenically improve biodiversity. (In the UK, afforestation may mean converting the legal status of some land to "royal forest".) Special tools, e.g. tree planting bar, are used to make planting of trees easier and faster.
In areas of degraded soil: In some places, forests need help to reestablish themselves
because of environmental factors. For example, in arid zones, once forest cover is destroyed, the land may dry and become inhospitable to new tree growth. Other factors include overgrazing by livestock, especially animals such as goats, cows, and overharvesting of forest resources. Together these may lead to desertification and the loss of topsoil; without soil, forests cannot grow until the long process of soil creation has been completed - if erosion allows this. In some tropical areas, forest cover removal may result in a duricrust or duripan that effectively seal off the soil to water penetration and root growth. In many areas, reforestation is impossible because people are using the land. In other areas, mechanical breaking up of duripans or duricrusts is necessary, careful and continued watering may be essential, and special protection, such as fencing, may be needed.
A plantation:
is a long artificially established forest, farm or estate, where crops are grown for sale, often in distant markets rather than for local on-site consumption. The term plantation is informal and not precisely defined. Crops grown on plantations include fastgrowing trees (often conifers), cotton, coffee, tobacco, sugar cane, sisal, some oil seeds (notably oil palms) and rubber trees. Farms that produce alfalfa, Lespedeza, clover, and other forage crops are usually not called plantations. The term "plantation" has usually not included large orchards (except for banana plantations), but does include the planting of trees for lumber. A plantation is always a monoculture over a large area and does not include extensive naturally occurring stands of plants that have economic value. Because of its large size, a plantation takes advantage of economies of scale. Protectionist policies and natural comparative advantage have contributed to determining where plantations have been located. Among the earliest examples of plantations were the latifundia of the Roman Empire, which produced large quantities of wine and olive oil for export. Plantation agriculture grew rapidly with the increase in international trade and the development of a worldwide economy that followed the expansion of European colonial empires. Like every economic activity, it has changed over time. Earlier forms of plantation agriculture were associated with large disparities of wealth and income, foreign ownership and political influence, and exploitative social systems such as indentured labor and slavery.
and farmyard waste, all of which are potentially very harmful. Accidental milk spillage from dairies is a serious contaminant. Undiluted animal manure (slurry) is one hundred times more concentrated than domestic sewage, and can carry a parasite, Cryptosporidium, which is difficult to detect. Silage liquor (from fermented wet grass) is even stronger than slurry, with a low pH and very high BOD (Biological Oxygen Demand). With a low pH, silage liquor can be highly corrosive; it can attack synthetic materials, causing damage to storage equipment, and leading to accidental spillage. Milk spillage, silage liquor, cattle and pig slurry; these are all examples of point source pollution. Diffuse source pollution from agricultural fertilizers is more difficult to trace, monitor and control. High nitrate concentrations are found in groundwater and may reach 50mg/litre (the EU Directive limit). In ditches and river courses, nutrient pollution from fertilizers causes eutrophication. This is worse in winter, after autumn ploughing has released a surge of nitrates; winter rainfall is heavier increasing runoff and leaching, and there is lower plant uptake. Phytoplankton and algae thrive in the nutrient-rich water. Normally, blue-green algae are very important in the river ecosystem, photosynthesising sunlight energy, and liberating oxygen into the water. In large numbers, however, algae can become excessive, discolouring the water, giving an unpleasant smell and robbing the water of valuable oxygen as bacteria work overtime feeding on dead algae remains. Bluegreen algae can also produce toxins, which kill wildlife, cause skin rashes, and cause pains and stomach upsets. Eutrophication is thus depriving the river of oxygen (called "oxygen debt"). As algae dominate and turn the water green, the growth of other water plants is suppressed; these die first, disrupting the food chain. Death of invertebrates and fish follow on, and their dead remains in turn lead to excess bacterial activity during decomposition, reducing oxygen levels still further. Water with high BOD figures are badly polluted, lower figures are better.
Pesticide and fertilizer:Despite land degradation, agricultural yields continue to increase, in part thanks to synthetic fertilizers and pesticides that temporarily boost soil productivity. Fertilizer consumption has increased exponentially since the 1950s, so much so that 50% of all commercial fertilizer ever produced has been applied since 1984. While fertilizer application can increase short term crop yields or keep the grass on your lawn green through November, it comes with its share of detrimental environmental and health effects. Many of the problems stem from the inability of the soil to retain all of the fertilizer applied. In fact, it is estimated that about one half of every metric ton of fertilizer applied to fields never even makes it into plant tissue, but instead ends up evaporating or being washed into local waterways.
Nitrogen (N), phosphorus (P), and potassium (K) are the primary major nutrients required for plant growth and are the main components of most fertilizers. These chemicals are energy intensive to produce, create vast amounts of waste, and contribute to greenhouse gas emissions. Producing one unit of N requires 1.4 units of carbon and 3 units of carbon are required to manufacture, transport and apply 1 unit of P as P2O5 fertilizer. For every ton of phosphoric acid produced, five tons of phosphogypsum are generated. Over the past 50 years, more than 700 million metric tons of phosphogypsum have accumulated in Florida alone, huge stacks at times covering more than 300 hectares at more than 60 meters high with settling ponds that threaten local water sources. The production of nitric acid, the primary feedstock for synthetic commercial fertilizer, is also a source of nitrous oxide, a greenhouse gas 310 times more potent than carbon dioxide, and accounted for 15.9 Tg CO2E in 2005, the equivalent emissions of 2.9 million vehicles. According to the World Health Organization, some 3 million people a year suffer from severe pesticide poisoning. Pesticide exposure can lead to cancer, birth defects and damage to the nervous system. Drinking water contaminated by pesticide runoff is a main source of exposure. Excess fertilizer use and runoff causes eutrophication in waterways which threatens animal and plant health. The surplus nutrients stimulate excessive plant growth, such as algal blooms, which consume nearly all the available oxygen in the water and cause other plants and animals to suffocate. Surplus nitrogen and phosphorus from fertilizer runoff, animal manure, soil erosion and sewage have created a dead zone of more than 7000 square miles in the Gulf of Mexico near the mouth of the Mississippi River. These huge algal blooms are starving out shellfish and threatening commercial fisheries and area economies-the U.N. reported nearly 150 dead zones throughout the worlds oceans in 2007.
Runoff
Transfer of land water to the oceans Runoff is the movement of landwater to the oceans, chiefly in the form of rivers, lakes, and streams. Runoff consists of precipitation that neither evaporates, transpires nor penetrates the surface to become groundwater. Even the smallest streams are connected to larger rivers that carry billions of gallons of water into oceans worldwide. Excess runoff can lead to flooding, which occurs when there is too much precipitation. Two recent ev ents in the United States have caused major flooding.
What Is Desertification?
Desertification is a process in which more of our land is becoming desert. It is not becoming a major problem because the land is hot and dry, but it is becoming a problem because the
soil is useless for growing crops. Desertification is most likely to occur in areas where rainfall is scarce.
Concept and Definition:- The term wasteland designates various types of unutilized
land. It was used to indicate small pieces of common land usually on less fertile tract, which failed to yield a return to the medieval farmers. A lay man may define the wasteland which is lying uninhibited, uncultivated, land left after some use or land which is no longer serving any purpose. Partially or fully degraded land through some usages may be called "waste land" rather than wasteland. The most widely accepted definition of wasteland is the land presently lying unutilized due to any reason. it may be degraded or not degraded.
Classification:-
The wastelands in general may be put under two categories: cultivable wasteland and uncultivable wasteland. Culturable Wasteland: The land which is capable or has potential for the development of vegetative cover and not being used due to different constraints of varying degrees such as erosion, water-logging and salt effects etc. Unculturable Land: The land can not be developed for vegetative cover for instance barren rockey areas, deserts and snow-covered glacial areas. Table 1 enumerates the various causes for the degradation of utilizable land.
Sr. No
Kinds wastelands
of
Causing agents Water 1. Sheet Erosion 2. Rill erosion 3. Gullied land 4. Ravinous land Wind Man Others 1. Shallow soil 2. Land slides
Utilizable waste 5. Water logging land 6. Salinity Sodicity 7. Diara land 8. Marshy land 9. Bouldery land 1. Bare rockey land 2. Glacier land 3. Deserts
3. Coastal 3. Industrial waste land land 4. Land affected by roads, kilns 5. Strip land
Appropriate measures based on these categories may be suggested to check runoff and soil loss. The measures include interalia cultural practices, bunding, terracing grassed water ways etc. Cultural practices used for checking runoff and soil loss include planting erosion-resistant crops, like legumes and grasses, adopting suitable cropping system, management and use of mulches B. Landslide Control The problem of landslides and landslips is common especially in the hilly areas posing threat to agricultural lands, highways and village habitants. The main causes for land-slides are weak geological formations, seismic disturbances, improper land use, deforestation, mining and glaciers. The Central Soil and Water Conservation Research and Training Institute, Dehradun has successfully demonstrated the control measures which include fencing to check biotic interference, diversion of water flow, construction of gabion wells and check dams, gully plugging and maintaining vegetation cover for stabilization and checking erosion. C. Erosion by Wind The Indian desert situated in the north-west states of Rajasthan, Gujarat, Haryana and Punjab. Nearly 70% of the desert region is covered by wind-worked sandy-soils, sands, loamy sand and sand dunes. The problems encountered in the area are wind erosion, deposition and movement of sand- dunes, low soil moisture storage, instability of soil structure and poor soil fertility etc. The following may be the suggested measures to overcome the problem. 1. Afforestation, plantation of windbreaks and shelter belts. The suitable plant species for this purpose are Prosopis chilensis (syn. P. juliflora),Azadirachta indica and Albizia libback. Soil removal in sheltered areas was only 3 tonnes/ha as against 72 tonnes/ha in unsheltered areas. 2. Grassland development. Grasses like Cenchrus ciliaris (Anjan grass and Lasiurus sindicus (wild peas) were found effective in arresting drifting of soil in April-June as suggesting that degraded lands in wind erosion prone areas may be kept under grasses. 3. Strip Cropping: The field strip cropping of grain legumes or cereals in grass strips developed at the Central Arid Zone Research Institute (CAZRI) is very effective tool for controlling wind erosion. 4. Mulching: Mulching is found very effective in reducing the wind erosion. 5. Fixing of Sand dunes. D. Riverine Land, Coastal and High altitude slopy lands The rivers carrying heavy sediment cause mendering action and bank erosion. The rivers originating from Himalayas causes greater effect. Depending on the velocity of flow, the fertile areas are eroded and large quantities of sediments are .deposited along the banks. Such riverine lands are called Khader in north India, diara in eastern Uttar Pradesh and Char in West Bengal.
In hilly areas, during rainy season many seasonal streams (chos) carry sediment load causing sever soil erosion. They diverge in different directions from the foot of the hills forming a net work of innumerable chos, some of them taking the shape of big rivers. With slowing of runoff, the transported sediment of sand and silt are deposited converting fertile land into sandy and bouldery degraded land. India has a long sea-coast in the states of Gujarat, Maharashtra, Kerala, Karnataka, Tamil Nadu, Andhra Pradesh and West Bengal, Goa, Andaman & Nicobar. In total we have 5600 km long coast sea line. During the monsoon and cyclonic periods, there is blowing and shifting of sand causing damage to the standing crops in the neighbouring areas. Hence, plantation of Casurina on the sandy foreshore backed by plantation of other suitable tree species further inland can minimize this problem. Keeping in view the environmental and ecological conditions in the region, land use planning requires proper choice of crop-forest pasture as suited to land and soil conditions. Grasslegume rotation is the best cropping system for soil conservation and providing nutritious fodder for the livestock. The over grazing pasture lands have to be restored and systematic and scientific grazing should be emphasized. E. Salt-affected Soils Salt affected soils may be classified into two categories : (i) saline soils (ii) alkaline soils. In table 2, some particulars of these kinds of soils are given in table 2. Table 2: Grouping of salt affected soils Sl.No Type of soil Type of salt pH present value 1 Saline soils Sodium chloride sulphate < 7.0 &
Environment
Arid & semi- High arid osmotic pressure/ toxic effect Semi-arid, semi-humid and humid Effect physical properties of soil
Alkali soils
1. Saline Soils Irrigation and high rainfall without provision of. drainage leads to salinization. The main factors of salinization are high salt content in the profile or salt layer, saline ground water, high water table, and seepage from canals and ingress of sea. The reclamation measure largely includes leaching with good quality .water and provision of drainage. So that the salts are kept well below
the root zone. Leaching requirement for each area has to be worked out and provided accordingly so that the salt do not rise above the normal root zone level of the commonly cultivated crops. The sodic or alkali soil occur in the Indo-Gangetic plain and parts of M.P. As these soils are saturated with sodium ions capable of alkaline hydrolysis (sodium-carbonate type salts), it will be necessary to replace the excess sodium in the exchange complex with calcium, gypsum, being relatively in expensive and abundanly available is the most commonly used amendment in the reclamation of sodic soils. Washing down with good quality of water is also necessary to leach down or remove the excess salt at the surface and the sodium released from the exchange complex. Drainage has to be provided to keep the salt well below the root zone. Once the soils are reclaimed, it may be preferable to take a green manure crop initially to improve the soil tilth. 2. Acidic soils The suggested process of reclamation for highly acidic soils which having pH < 5.5 and are totally unproductive. The measures are (i) use of lime rich industrial wastes like basic slog, papermill sludge and cement factory waste to reduce the cost, (ii) annual application of 3 to 5 qt/ha in rows for legumes rather than 2 to 2.4 tonnes, for a crop cycle of 5 years and (iii) application of rock phoshate of proper quality as a source of phosphorus supplemented by lime for amelioration and Ca nutrition of plants. F. Water logged Areas It is estimated that India is having approximately 6 m. ha water logged area. Water logging result in restriction of the normal circulation of air. The depth of water-table which is considered harmful depend upon crop, type of soil and quality of water. The remedial measures used are 1. Drainage either surface or sub surface or both to remove surplus water 2. Lining of canals to prevent seepage and rise of water table. 3. Sinking tubewell and utilizing water for irrigation thereby 0lowering water table. 4. Waterlogged lands contiguous to the sea coast may be ameliorated for crop cultivation or used for fish culture. G. Shifting Cultivation Shifting cultivation or jhuming is a primitive form of cultivation practised in north-eastern states of India or in regions where land is not a limiting factor. The dense forest and other vegetation on the slopping or other land is cleared .and crops raised without any management. As yields decreases, new forest is cleared for the purpose, leaving the old area to vagaries of nature causing erosion of soil and rendering soils shallow, unstable and degraded. For management of jhumed land the suitable land for intensive cultivation have to be identified. Depending upon the climatic factors, soil characteristics and associated features intensive system of land use and cropping pattern will have to be evolved for each specific site without being detrimental to environment. Careful soil and water conservation practices have to be
formulated. Training of the farmers in the scientific farming systems and management of resources is necessary H. Intercropping systems involving plantation crops Most of the plantations crops are obtained from small holdings, where it is customary to integrate crops and animal production with perennial crops. Most of such intensive land use systems consist of some form of crop combination, although there are other possibilities for intimate plant associations leading to more efficient use of land and other available resources. Some of the prominent examples of integrated plantation crop system include * Cocoa food crops like wheat & paddy * Multi-storey plantations like Coconut + papaya * Tea interplanted with Albizzia moluccana * Banana + Sugarcane + cucurbits I. Developing wasteland with animal Husbandry It is considered that animals are a big nuisance causing serious degradation to vegetation on the one hand and man himself by over harvesting of wood for ever increasing need of fuel and industry on the other hand. The problem of soil degradation by animals may be overcome by the proper management of increasing demand of fodder by developing silvi-pastoral system and growing fodder crops on wasteland and developing pastures on marginal and degraded land. On pastures the grazing should be systematic. Since most of the wasteland is owned by small and marginal farmers so animal husbandry is the best source of alternative income for them.