Académique Documents
Professionnel Documents
Culture Documents
19.0 %
*
190 W/m2
Antireflection glass
* For HIT-N240SE10
- Reducing reflection and scattering of incoming light - Improving generated electricity levels in morning and evening times
electrode
Special Features
normalized output power
SANYO HIT solar modules are 100% emission free, have no moving parts and produce no noise.The dimensions of the HIT modules allow space-saving installation and achievement of maximum output power possible on given roof area.
approx. 10%up
Module temp.75
HIT
0.5
c-Si
time
13
15
17
19
The HIT cell and module have very high conversion efficiency in mass production.
Cell E ciency Module E ciency Output / m2 21.6% 21.1% 20.7% 19.0% 18.6% 18.2% 190 W/m2 186 W/m2 182 W/m2
HIT-N230SE10
EN
Label
4-7
Connector MC3
(762)
Note: Standard Test Conditions: Air mass 1.5, Irradiance = 1000W/m2, cell temperature = 25C * All modules measured by SANYO facility have output with positive tolerance
Temperature characteristics
Temperature (NOCT) [C]
240 44.0
235 44.0
230 44.0
Temperature coe cient of Pmax [%/C] Temperature coe cient of Voc [V/C] Temperature coe cient of lsc [mA/C]
Front
side
Backside
35
At NOCT
Maximum power (Pmax) [W] Max. power voltage (Vmp) [V] Max. power current (Imp) [A] Open circuit voltage (Voc) [V] Short circuit current (Isc) [A]
(24)
Section A-A
Section B-B
Guarantee
Power output: 10 years (90% of Pmin) 25 years (80% of Pmin) Product workmanship: 5 years (Based on guarantee document)
Note: Nominal Operating Cell Temperature : Air mass 1.5 spectrum, Irradiance = 800W/m2, Air temperature = 20C , wind speed 1 m/s
Materials
Cell material: 5 inch HIT cells Glass material: AR coated tempered glass Frame materials: Black anodized aluminium Connectors type: MC3
At low irradiance
Maximum power (Pmax) [W] Max. power voltage (Vmp) [V] Max. power current (Imp) [A] Open circuit voltage (Voc) [V] Short circuit current (Isc) [A]
235
235
230
Certi cates
Note: Low irradiance: Air mass 1.5 spectrum, Irradiance = 200W/m2, cell temperature = 25C
00000234
Dependence on irradiance
7.00 6.00 5.00
Member of
Current[A]
400W/m 2 200W/m 2
1.00 0.00
10
20
30
40
50
60
Voltage[V]
CAUTION! Please read the installation manual carefully before using the products.
Due to our policy of continual improvement the products covered by this brochure may be changed without notice.
SANYO Component Europe GmbH Solar Division Stahlgruberring 4 81829 Munich, Germany Tel.+49-(0)89-460095-0 Fax.+49-(0)89-460095-170 http: //www.sanyo-solar.eu email: info.solar@sanyo-solar.eu
35
(12)
(330)
43.7
43.0
42.3
(960) (123)
11/10
EN
unit: mm
JUNCTION BOX
35
240
235
230