Vous êtes sur la page 1sur 6

Code No: RR420103 Set No.

1
IV B.Tech II Semester Supplimentary Examinations, May 2008
INDUSTRIAL WASTE AND WASTE WATER MANAGEMENT
(Civil Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆

1. (a) How will you detect the presence of iron and manganese?
(b) Tabulate the water quality requirements for Cooling water. [8+8]
2. (a) Enumerate the basic theories of Industrial wastewater management and ex-
plain the proportioning.
(b) What is Equalisation? List and explain any four methods of the Equalisation
in industrial wastewater. [8+8]
3. Design an aerated Grit chamber for treatment of composite municipal and industrial
waste with average flow of 1 MLD. Assume all other necessary data. [16]
4. A wastewater effluent of 600 l/s with a BOD = 60 mg/l, DO = 2.5 mg/l and
temperature of 250 C enters a river where the flow is 30 m3 /sec and BOD = 3
mg/l, DO = 8.5 mg/l and temperature of 160 C. Deoxygenation constant for the
waste is 0.10 per day at 200 C. The velocity of water in the river downstream is 0.15
m/s and depth of flow is 1.5 m. Determine the following after mixing of wastewater
with the river water:
(a) Combined discharge
(b) BOD
(c) DO, and
(d) Temperature. [16]
5. What are the advantages of recirculation of industrial wastes and use of treated
municipal waste water in industries? Explain in detail. [16]
6. Give the characteristics and treatment of the waste generated in the following
industries
(a) Textile
(b) Tannery [16]
7. (a) Write a detailed note on treat ability of Distilleries wastewater.
(b) What are fertilizer plant wastes? Suggest suitable method for disposal of the
same. [16]
8. Write about generation of waste water, its characteristics and suggest suitable
treatment for steel plant wastewater. [16]

⋆⋆⋆⋆⋆

1 of 1
Code No: RR420103 Set No. 2
IV B.Tech II Semester Supplimentary Examinations, May 2008
INDUSTRIAL WASTE AND WASTE WATER MANAGEMENT
(Civil Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆

1. (a) How will you detect the presence of iron and manganese?
(b) Tabulate the water quality requirements for Cooling water. [8+8]

2. (a) Enumerate the basic theories of Industrial wastewater management and ex-
plain the proportioning.
(b) What is Equalisation? List and explain any four methods of the Equalisation
in industrial wastewater. [8+8]

3. Enumerate the various processes involved in tertiary treatment of industrial waste


and describe any one of them. [16]

4. A wastewater effluent of 600 l/s with a BOD = 60 mg/l, DO = 2.5 mg/l and
temperature of 250 C enters a river where the flow is 30 m3 /sec and BOD = 3
mg/l, DO = 8.5 mg/l and temperature of 160 C. Deoxygenation constant for the
waste is 0.10 per day at 200 C. The velocity of water in the river downstream is 0.15
m/s and depth of flow is 1.5 m. Determine the following after mixing of wastewater
with the river water:

(a) Combined discharge


(b) BOD
(c) DO, and
(d) Temperature. [16]

5. (a) Write a detailed note on reuse of industrial waste water.


(b) Write a note an Economics of industrial waste water treatment. [8+8]

6. What different operations are carried out in paper and pulp industry? Also give
the following information in detail of the same industry.

(a) Waste water characteristics


(b) by product recoveries
(c) Treatment methods. [16]

7. Give the characteristics and treatment of the waste generated in the following
industries

(a) Fertilizer plant

1 of 2
Code No: RR420103 Set No. 2
(b) Distilleries [16]

8. Write about generation of waste water, its characteristics and suggest suitable
treatment for steel plant wastewater. [16]

⋆⋆⋆⋆⋆

2 of 2
Code No: RR420103 Set No. 3
IV B.Tech II Semester Supplimentary Examinations, May 2008
INDUSTRIAL WASTE AND WASTE WATER MANAGEMENT
(Civil Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆

1. (a) Describe the method of the removal of colour, odour and taste from Water.
(b) Tabulate the water quality requirements for Boiler water. [8+8]
2. (a) Enumerate the basic theories of Industrial wastewater management and ex-
plain the strength reduction.
(b) What is volume reduction? List and explain any four methods of the volume
reduction in industrial wastewater. [8+8]
3. Design an aerated Grit chamber for treatment of composite municipal and industrial
waste with average flow of 1 MLD. Assume all other necessary data. [16]
4. What do you understand by self-purification property of a stream? Explain the
factors affecting this property. [16]
5. (a) Write a detailed note on reuse of industrial waste water.
(b) Write a note an Economics of industrial waste water treatment. [8+8]
6. What different operations are carried out in paper and pulp industry? Also give
the following information in detail of the same industry.
(a) Waste water characteristics
(b) by product recoveries
(c) Treatment methods. [16]
7. What different operations are carried out in fertilizer plant? Also give the following
information in detail o the same industry.
(a) Waste water characteristics
(b) byproduct recoveries
(c) Treatment methods. [16]
8. Give the characteristics and treatment of the waste generated in the following
industries.
(a) steel plants.
(b) Oil refineries. [16]

⋆⋆⋆⋆⋆

1 of 1
Code No: RR420103 Set No. 4
IV B.Tech II Semester Supplimentary Examinations, May 2008
INDUSTRIAL WASTE AND WASTE WATER MANAGEMENT
(Civil Engineering)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
⋆⋆⋆⋆⋆

1. (a) How will you detect the presence of iron and manganese?
(b) Tabulate the water quality requirements for Cooling water. [8+8]

2. (a) What is strength reduction? List and explain any four methods of the strength
reduction in industrial wastewater.
(b) What is the necessity of Neutralization in Industrial waste treatment? Explain
the working of the same with suitable examples. [8+8]

3. (a) Write a note on effect of Industrial pollutants on sewage treatment.


(b) Write a detailed note on Importance and necessity of Common Effluent Treat-
ment Plant. [8+8]

4. A city discharges 1.25 m3 /S of wastewater into a stream whose minimum rate of flow
is 8 m3 /S. The velocity of stream is 0.8 m/s. The temperature of the wastewater
is 200 C and that of the stream is 2.0 mg/l. The wastewater contains no dissolved
oxygen but the stream is 90 percent saturated upstream of the discharge. At 200
C, K’ is estimated to be 0.3 per day and R is 0.9 per day. Determine the critical-
oxygen deficit and its location. Also, estimate the 200 C BOD5 of a sample taken
at the critical point. Use temperature coefficients of 1.135 for K’ and 1.024 for
R’. Also, plot the dissolved-oxygen-Sag curve. Given: saturation concentration at
150 C = 10.15 mg/l. [16]

5. (a) Write a detailed note on reuse of industrial waste water.


(b) Write a note an Economics of industrial waste water treatment. [8+8]

6. What different operations are carried out in paper and pulp industry? Also give
the following information in detail of the same industry.

(a) Waste water characteristics


(b) by product recoveries
(c) Treatment methods. [16]

7. Write in detail about generation of waste water, its characteristics and suggest
suitable treatment for distilleries waste water. [16]

8. What different operations are carried out in oil refinery? Also give the following
information in detail of the same industry.

(a) Waste water characteristics

1 of 2
Code No: RR420103 Set No. 4
(b) byproduct recoveries
(c) Treatment methods. [16]

⋆⋆⋆⋆⋆

2 of 2

Vous aimerez peut-être aussi