Vous êtes sur la page 1sur 4

ELECON APRON FEEDERS

Alwasy step ahead in technology

DESIGN AND CONSTRUCTION FEATURES OF ELECON APRON FEEDERS

H MACHINE DESIGN :
Elecon Apron Feeders are of extremely rugged construction and are specifically designed to withstand the shock loading of large lumps beings dumped in the hopper above the feeder. These machines can also be employed for drawing material from hoppers and delivering it at controlled rates to succeeding belt conveyors. Apron Feeders have a considerable effect on the efficiency of crushing operations as they ensure that the feed is introduced to the crusher over the full length of the crushing cavity at a steady and controlled rate.

H BEARINGS :
Heavy-duty spherical roller type bearings support the head and tail shafts, mounted in pedestals. Those for supporting the head shaft are bolted to the main longitudinal members while those for supporting the tail shaft are mounted in slides, permitting adjustment of the sprocket centres to takeup chain stack.

Sprocket & Chain Assembly

H SPROCKETS :
Segmental, cast steel sprockets are cachined and jig drilled to fit their respective mounting hubs which are keyed to the drive shaft.

H CHAIN AND CARRYING ROLLERS :


Chains of the type used for tractors are fitted, having forged steel links and high-carbon steel pins capable of operating under the most arduous conditions, without the need for lubrication. Steel support rollers fitted with grease lubricated bearing bushes are provided beneath the chains. Mn Cast Steel Chains can also be provided upon request.

H APRON PLATES :
Apron feeder pans are designed to suit specific requirements, considering duty factors and type of material. Pans are ribbed for strength and have flanged ends. Sufficient overlap is porvided restricting spillage at the moment when passing around the sprocket. Pans can be supplied either in cast manganese steel or pressed mild steel or of welded plate construction, to suit the nature material to be handled.

Cross Section

H SKIDDER BAR :
A skidder bar is provided centrally between the chains, beneath the apron where the shock loads occur. The skidder bar is not normally in contact with the apron and is merely to prevent distortion of the apron plates.

H RETURN ROLLERS :
Rollers are provided to support the slack side of the moving apron to relieve the radial load on the head and tail shaft bearings.

H LUBRICATION :
A hand-operated twin-line or centrally motorised lubrication system is incorporated in the design of the machine to ensure regular service at all grease points. Ready access is available to all parts for maintanance purpose.

Carrying Roller Assembly

H DRIVE :
The necessity to vary the speed of the moving apron is found to be a useful feature, to ensure control over the capacities. The final drive to the shaft can therefore be supplied with a DC motor, or hydraulic motor, or other variable speed control systems.

H DRIBBLE CONVEYOR :
Elecon Apron Feeders also incorporate a dribble conveyor, under the return strand of the apron feeder. The dribble conveyor picks up dust and fines dropping from the return strand, thus eliminating manual cleaning and saving considerable man-hours. Dribble conveyors are either belt type or drag chain, with an independent drive. Material collected by the dribble conveyor is discharged back into the main stream.

Return Rollers Assembly

Please furnish the following data for selection : MATERIAL TYPE LUMP SIZE & DISTRIBUTION BULK DENSITY CAPACITY DESIGN RATED PROFILE HOR C/C LENGTH VERTICAL LIFT WIDTH OF PAN HOPPER SLOT OPENING DIMENSIONAL SKETH

CORPORATE OFFICE
Elecon Engineering Company Ltd. Anand Sojitra Road, Vallabh Vidyanagar - 388120, Gujarat, India. Phone : 91-2692-31170, 31070, 31120, Fax : 91-2692-36559 E-mail: Gear division : bjbabaria@mhe.elecon.com MHE division : jnshah@gear.elecon.com

SINGAPORE OFFICE
Elecon Singapore Pte. Ltd. 10 Anson Road, #19-13 International Plaza, Singapore - 079903. Phone : 65-227-8258, 65-227-8425, Fax : 65-227-8942 E-mail: elecon_sing@eleconsingapore.elecon.com

AUSTRALIA OFFICE
Elecon Australia Pty Ltd. 16, Dunwell Avenue, Loftus NSW 2232, Australia. Phone: +61 2 9521 3511 Fax: +61 2 9521 3522 E-mail: thall@aus.elecon.com

MARKETING AGENT
EMTICI Engineering Ltd., Phone : +91-2692-30168, 31082, 31419, 31125 Fax : +91-2692-36508 E-Mail : sales_emtici@emtici.elecon.com

EAST ZONE
CALCUTTA Phone : +91-33-4761861, 4760876, 4760904, 4760926 Fax : +91-33-4761831 E-Mail : sales@calemtici.elecon.com ASANSOL Phone : +91-341-205901, 202038, 211726 Fax : +91-341-202038 E-Mail : sales@asnemtici.elecon.com

WEST ZONE
AHMEDABAD Ph. No. : +91-79-6406683,84,85,86 Fax No. : +91-79-6401363 E-mail : sales@ahdemtici.elecon.com

SOUTH ZONE
CHENNAI Phone : +91-44-4349237, 4349497, 4349643, 4322455 Fax : +91-44-4349643 E-mail : sales@cheemtici.elecon.com BANGALORE Phone : +91-80-2260219, 2281834, 2250082 Fax : +91-80-2281834 E-Mail : sales@blremtici.elecon.com SECUNDERABAD Phone : +91-40-7844748, 7845250, 7846984 Fax : +91-40-7848317 E-Mail : sales@secemtici.elecon.com

MUMBAI Phone : +91-22-2821315, 2820725, 2821365, 2870792, 2815693 Fax : E-Mail : +91-22-2870791 sales@bomemtici.elecon.com

DHANBAD Phone : +91-326-306283, 302320 Fax : +91-326-302320 E-Mail : sales@dhnemtici.elecon.com JAMSHEDPUR Phone : +91-657-428138, 435382 Fax : +91-657-428015 E-Mail : sales@jsremtici.elecon.com

PUNE Phone : Fax: Email :

+91-20-4330646 +91-20-4330646 sales@puneemtici.elecon.com

NORTH ZONE
NEW DELHI Phone : +91-11-3414339, 3414341, 3414069, 3414634 Fax : +91-11-3709046 E-Mail : sales@delemtici.elecon.com BILASPUR Phone : +91-7752-47347, 28922, 24122 Fax : +91-7752-23188 E-Mail : sales@bspemtici.elecon.com

CENTRAL ZONE
NAGPUR Phone : +91-712-540771, 531601 Fax : +91-712-531450 E-Mail : sales@ngpemtici.elecon.com

VALLABH VIDYANAGAR Phone : +91-2692-30168, 31082, 31419, 31125 Fax : +91-2692-36508 E-Mail : sales_emtici@emtici.elecon.com VADODARA Phone : +91-265-750739,750740, Fax : +91-265-750739 E-Mail : bmjoshi@brd.emtici.elecon.com

Vous aimerez peut-être aussi