Académique Documents
Professionnel Documents
Culture Documents
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A. Issues with INSITE 7.5
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PCID's
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- It is becoming common for INSITE to be installed and registered with an
Administrator account, and then used with a Limited User account. On some
computers, INSITE does not have access to the same security settings on
Limited User accounts as it would on Administrator accounts. This causes
a different PCID to be displayed for the Limited User account after INSITE
has been registered with the PCID displayed for an Administrator account.
It is recommended after installation to register the INSITE PCID displayed when
logging into the Limited User account.
- For Calibration Authorization passwords contact your Distributor with the
INSITE 7.5 PCID.
- New users can enter both the Basic and Functional Password when first opening
INSITE . If the Basic is entered on the "New Functionality Password" window,
INSITE will open in Read Only. The Functionality Password will have to be
entered under the Tools > Options > Security window. (DB_G00149670)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Installation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- When installing Chinese version of INSITE on Windows XP, East Asian Languages
Option in the Regional Settings must be selected in order for the Characters
to appear correctly.
- INSITE
7.5 does not support Windows 95, 98, 98SE, ME, NT or 2000.
+----------------------------+----------------------------+
|Installing on the "C" drive |Installing on the "D" drive |
|
|
|
+------------------+----------------------------+----------------------------+
|
|
|
|
|
|
|
|
| Space required |
C:450 MB
|
C: 30 MB
|
| at the time of |
|
|
| installation
|
D:N/A
|
D: 400 MB
|
|
|
|
|
|
|
|
|
+------------------+----------------------------+----------------------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Trip Information
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- When resetting Trip Information be sure to key off for 30 seconds before
continuing. The ECM may have an invalid foot print if the key is not
switched off for the required amount of time.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Work Orders/ECM Images/Templates
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Double clicking on an image file (.eif format) will open INSITE , import the ima
ge
and automatically connect to this image.
- Double clicking on the converted image files (.csv format) will not open them
with the correct format in Microsoft Excel.
Work around:
Follow the steps below to open a converted (.csv format) image file in Excel:
- Open Microsoft Excel
- Click on File -> Open
- Change the Files of type field to "All Files(*.*)" or "Text Files (*.
csv)
- Select C:\Intelect\INSITE\Export\desiredimage.csv
- The "Text Import Wizard" will open
- In Step 1 of the wizard, make sure the "Delimited" option is selected
and
click "Next"
- In step 2 of the wizard, uncheck the "Tab" box and check the "Comma"
box
and click "Next"
- In step 3 of the wizard, click on "Finish"
- Format columns as desired
- When upgrading to INSITE 7.5 from any version of INSITE , the following files
need to be backed up:
- C:\Intelect\INSITE\WorkOrders
- C:\Intelect\INSITE\UserSettings\data.wo
- When using templates it is advised to verify the first template sent to the ta
rget
vehicle. This helps ensure the template configuration is correct for subsequen
t
vehicles.
- When using templates verify that the ECM code is compatible or the same.
- When naming images and templates, special characters cannot be used
(i.e. & ^, etc).
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
B. Issues with ECM Applications
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- The "Injector Check Valve Diagnostics Test" might not run for some earlier ECM
code phases on the ISX - CM870 ECMs. Please refer to the table below
for more details.
+----------------------------+------------------------------+
+----------------------------+------------------------------+
|
ECM Code Phase
| Test Status in INSITE 7.5
|
+----------------------------+------------------------------+
+----------------------------+------------------------------+
|
|
|
| Phase 5.4.6.02 and prior |
Test will not run
|
|
|
|
+----------------------------+------------------------------+
|
|
|
| Phase 5.4.7.11 and post |
Test will run
|
|
|
|
+----------------------------+------------------------------+
|
|
|
| Phase 6.5.1.01 and prior |
Test will not run
|
|
|
|
+----------------------------+------------------------------+
|
|
|
| Phase 6.5.2.0x and post |
Test will run
|
|
|
|
+----------------------------+------------------------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CELECT Plus
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- INSITE ReCon ECM Procedure:
CAUTION:
To Calibrate this ECM, use the following steps:
1.
2.
3.
4.
5.
6.
7.
8.
9.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
QSK19/45/60-CM500
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- When calibrating a QSK19/45/60-CM500 ECM using an INLINE II, 4 or 5,
avoid using a connection with "Auto Detect" as the calibration might fail.
Work around: Use an INLINE II, 4 or 5 connection that uses J1587/J1708
instead of Auto Detect.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
QSM 11
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Calibration Selection
|L Gas Plus
|
|
|
|
|
|
|
|
| X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|ISB5.9 G CM2180|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISL G CM2180 |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|CELECT
| X | X
| X |
| X |
|
+---------------+-------+---------+------+------+------+-------+
|CELECT Plus
| X | X
| X |
| X |
|
+---------------+-------+---------+------+------+------+-------+
|CELECT PlusInd | X | X
| X |
| X |
|
+---------------+-------+---------+------+------+------+-------+
|CENTINEL
| X | X
| X |
| X |
|
+---------------+-------+---------+------+------+------+-------+
|CENTRY
| X | X
| X |
| X |
|
+---------------+-------+---------+------+------+------+-------+
|Gas Compression|
|
|
|
|
|
|
|GTA/KTA
|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|Gas CENSE
|
|
|
|
|
|
|
|QSV81/91
|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|B3.9/5.9/C8.3 |
|
|
|
|
|
|
|CM2150
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISB
| X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------|
|ISB Chrysler |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISBe/ISBe4
|
|
|
|
|
|
|
|4 & 6 Cylinder | X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|ISBe4.5/ISBe5 |
|
|
|
|
|
|
|- CM2150
|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISC/ISL
| X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|ISC/Transit
|
|
|
|
|
|
|
|Bus ISL8.3|
|
|
|
|
|
|
|CM850
| X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|ISB6.7 CM2250 |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISC8.3 CM2250 |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISB/L-CM850
| X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|ISL8.9 CM2150 SN
|
|
|
|
|
|
| (Euro 4.5/5) |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISL9 CM2250
|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISF2.8CM2220 AN|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISF2.8CM2220IAN|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISF3.8CM2220 AN|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISF3.8CM2220IAN|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISLe4.5/ISLe5 |
|
|
|
|
|
|
|- CM2150
|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISM
| X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|ISM-CM870/875 | X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|ISM-CM876
|
|
| X |
| X |
|
+---------------+-------+---------+------+------+------+-------+
|ISM11-CM876 SN |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISX-CM871
|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISX/ISZ13
|
|
|
|
|
|
|
|- CM2150 SN
|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|ISX11.9/15
|
|
|
|
|
|
|
|- CM2250
|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|Signature/ISX | X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|Signature/ISX |
|
|
|
|
|
|
| - CM870
| X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|PIM
| X |
X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|QSB
| X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|QSC8.3/QSL9
| X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|QSK19/45/60/78 | X | X
| X |
| X |
|
+---------------+-------+---------+------+------+------+-------+
|QSK19/23-CM500 | X | X
| X |
| X |
|
+---------------+-------+---------+------+------+------+-------+
|QSM11
| X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|QSX15
| X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|QSX15 CM2250ECF|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|QST30
|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|QSK19G/45G/60G |
|
|
|
|
|
|
|QSV81/91
| X | X
| X | X | X | X |
+---------------+-------+---------+------+------+------+-------+
|QSK19/23/38/50 |
|
|
|
|
|
|
|/60/78-CM850 |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|QSB/C/L-CM850 |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|QSB5/7-CM850 PG|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|QSB3.3-CM2150 |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|QSB4.5/6.7
|
|
|
|
|
|
|
|CM2250
|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|QSL 9 CM2250 |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|QSK23/60/78
|
|
|
|
|
|
|
|CM850 PG
|
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|QSL9-CM850 PG |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|QSM11-CM876 PG |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
|QST30-CM850 PG |
|
|
| X |
| X |
+---------------+-------+---------+------+------+------+-------+
* NOte: The INLINE II adapter has become obsolete. It can be used with INSITE ,
but technical support for this adapter is not available.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Datalink Adapter Issues
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Do not substitute cables, except as indicated in the INLINE 4/5 Product
Announcement Bulletin.
- Do not use an extension cable on the Datalink side of the INLINE II adapter.
- Incompatible cables may damage the INLINE, INLINE I INLINE II and/or INLINE 4/
5
adapter or personal computer and will void warranty.
- Incompatible cables may cause communication issues with INSITE .
- INLINE II or INLINE 4/5 adapter may intermittently lose communication. If you
r
Datalink adapter has communication problems, disconnect power from the adapter
for 5 seconds and then reconnect. The INSITE program does not need to be
shutdown.
- There is feature under Tools - Reset Datalink Adapter that will correct some
software communication errors with the INLINE II and INLINE 4/5.
- The main harness (backbone) has a maximum overall length of 40 meters.
- A J1939 stub, which can be a connection point for ECM's and/or the
INLINE II or INLINE 4/5 Datalink adapter, cannot exceed a maximum length of 1
meter.
- At each end of the backbone harness is a terminating resistor with a
nominal resistance of 120 Ohms, it will measure 60 Ohms when you measure
across the Datalink.
- The INLINE II and INLINE 4/5 Adapters should be connected to a continuous
battery power supply. When making adjustments with INSITE , including calibrati
on
download, the operator will be asked to switch the key off for 30 seconds.
If the adapter is getting its power from a power source dependent on the key
switch status, such as the lighter adapter inside the cab, the Adapter will lo
se
power, which will result in INSITE losing connection to the ECM. This will
require the operator to reconnect to the ECM and the adjustments might not
have been saved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
E. Version Compatibility
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
INSITE Software and Operating System Compatibility:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- INSITE 7.5 is compatible with the following operating systems:
Windows XP SP3, Windows Vista, and Windows 7. Both 32-bit and 64-bit
versions are supported.
- Contact the local Cummins Distributor to register your new INSITE
Service Tool and receive a password.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
F. Special Issues
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Power Savers
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Turn off any power saver features when communicating with an ECM,
especially when downloading a calibration to an ECM. These commands
require the computer to communicate with the ECM, but do not require
you to interact with the computer. As a result, the power saver does
not recognize that a command is in progress and automatically turns
off the computer. This may disable the COM port, hard drive and other
hardware required for the calibration download process.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
G. Suggestions and Tips
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- Do not turn off the PC while INSITE is running. Exit INSITE before
turning off the computer. Disk and database corruption can occur
if you do not exit INSITE before turning off the computer.
- If the PC CMOS battery is not working, please make sure you reset
the PC date and time and restart the computer before you attempt to open
INSITE .
- To back up all Work Orders and Images with INSITE 7.5, select the
"Export All" from the right-click menu while highlighting any Image.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
H. Saving Data From Previous Versions of INSITE
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- ECM Templates from earlier versions of INSITE 6.3A, 6.4, and 6.5 cannot
be used with INSITE 7.5. They can be printed.
- ECM Templates from INSITE
6.5.1, 6.5.2, 7.0 and 7.0 FP1/FP2 for the ISB CM2150,
ISC CM2150 and ISL CM2150 cannot be used with INSITE 7.5. They can be printed.
All other engine's templates can be used with INSITE 7.5.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JRE Created: INSITE 7.5 - April 2011
Document 6733-RLNO-07 Version 1.0.1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~