Académique Documents
Professionnel Documents
Culture Documents
10/2011
www.avnet-memec.eu
AppliedMicro PACKETpro Multi-Core 460 Family. The PACKETpro addresses enterprise needs - bandwidth explosion, converged networks, and energy management. Marvell Marvell processors use a proprietary-designed ARM-core to deliver optimal performance, low power, and high levels of integration. The Marvell ARM compliant CPU cores are the most advanced implementations of the industry standard ARM architecture and deliver exceptional processing performance at low power. Microsemi Microsemi Corporation acquired Actel Corporation to include individual components, integrated circuit solutions as well as low power FPGAs and mixed signal FPGAs SmartFusion. SmartFusion intelligent mixed signal FPGAs are the only devices that integrate an FPGA, ARM Cortex-M3, and programmable analog, offering full customisation, IP protection, and ease of use. PLX technology ExpressLane PCI Express (PCIe) Switch Family includes high performance, lowest latency, lowest power, multipurpose, highly flexible and highly configurable devices. renesas SuperH is an embedded RISC developed for high cost-performance, miniaturisation, and performance per unit of power consumption (MIPS/W).
The Avnet Memec technical team will support you in selecting one of these core technologies and additionally solve the power to the core challenge - using solutions from one of the following suppliers:
Intersil Intersil Power Management offers a complete portfolio of high performance power solutions for DSP, FPGA, CPLD, any processor, DDR memory and other loads in your system. These products range from standard linear regulators and highly flexible PWM controller & driver options to fully integrated plug-in power modules, and are tailored to meet every designers challenges. Intersil also makes designing with power products easy by providing cutting edge support tools like iSim (an online simulation tool), thorough application notes, a broad selection of evaluation boards, and comprehensive technical documentation. Maxim Maxim was founded over 25 years ago with the mission to deliver innovative analog and mixed-signal engineering solutions that add value to its customers products. Maxim is a world leader in both highly-integrated and discrete power management and battery charging solutions offering over 1800 products for all forms of portable power management, harsh automotive environments, and line-powered conversion. Semtech Semtech supplies a broad portfolio of power management ICs used in a wide range of applications, from portable and consumer devices to telecommunications, networks, computing and industrial equipment. Their products include feature-rich, highly integrated devices tailored for the taxing power demands in point-of-load designs for complex equipment, as well as low power, small package and cost effective parts for portable and other low power, high efficiency equipment. In addition, they continue to provide power products that enable the latest architectures from industry leaders such as AMD and Intel.
The following table details power to the core solutions from selected Avnet Memec power management suppliers. It shows the AppliedMicro part number and the voltage requirements to power the part for typical voltage and current supply conditions. You can then select a part number from each of our power management offerings.
APPLIedMIcro
AppliedMicro Part VIn 5 5 APM86290 5 5 5 Eval kits VoUT Description 0.9 1.5 1.8 2.5 3.3 Info under NDA o/p Current Typical
Notes
Power sequencing required 12 12 0.9 1.5 1.8 2.5 3.3 Info under NDA
Use EN and PG for sequencing ISL8201M or ISL6420B ISL8502 ISL9016 ISL9016 ISL85001 ISL8201MEVAL1Z, ISL6420BEVAL1Z, ISL8502EVAL1Z, ISL9016IRUZ-EVALZ, ISL85001EVAL1Z
Use power good to start 1.5 V, Use power good to start 1.8 SC418 or SC402 SC183C SC560* SC560* SC410 Available, see page 26
APM86290
12 12 12
Eval kits
Notes
Power sequencing required 5 5 0.9 1.5 1.8 2.5 3.3 Info under NDA
Use EN and PG for sequencing ISL8206M or ISL8016 ISL8009A ISL9016 ISL9016 ISL9008A ISL8206MEVAL1Z, ISL8016EVAL1Z, ISL8009AEVAL1Z, ISL9016URUZ-EVALZ
Use power good to start 1.5 V, Use power good to start 1.8 SC418 or SC402 SC283* SC283* SC560* SC560*
APM86190
5 5 5
Eval kits Notes Power sequencing required 12 12 APM86190 12 12 12 Eval kits 0.9 1.5 1.8 2.5 3.3 Info under NDA
Use EN and PG for sequencing ISL8201M or ISL6420B ISL8502 ISL9016 ISL9016 ISL85001 ISL8201MEVAL1Z, ISL6420BEVAL1Z, ISL8502EVAL1Z, ISL9016IRUZ-EVALZ, ISL85001EVAL1Z
Use MAX8688 for sequencing MAX8686 MAX8686 MAX8636 1/2 MAX8636 1/2 MAX8891 MAX8633EVKIT, MAX8656EVKIT Use MAX8688 for sequencing, MAX8636 can be pin programmed for different V o/p's
Use power good to start 1.5 V, Use power good to start 1.8 SC418 or SC402 SC183C SC560* SC560* SC410 Available, see page 26
Notes
Use power good to start 1.5 V, Use power good to start 1.8
Note 1: NDA info The full datasheets contain the voltage descriptions and typical / max. / min. current consumption. Note 2: Please refer to product selector section for specification details of each power product. * These Semtech parts are dual o/p so only one device is required for every 2 outputs
MArveLL
Marvells family of innovative processors offer original equipment manufacturers (OEMS) and developers cost-effective performance and flexibility for a range of devices and applications in todays increasingly mobile world. Support from Marvell includes: Board Support Package (BSP) Accelerate your time to market by reducing development time through pre-validated platform solutions on leading mobile operating systems, along with other tools and support. Mass Market Devices Leverage the growing opportunities in computing and digital devices with Marvells innovative architecture, delivering advanced processing capabilities with low-power consumption at consumer price points. Greater return on investment on your development through architectural compatibility that enables software reuse across Marvells family of products. In this brochure we will feature Kirkwood, Discovery, Armada 168 and Armada 300. Kirkwood Mv88F6281 The Marvell 88F6281 SoC with Sheeva embedded CPU technology, is a highperformance integrated controller. It integrates the Marvell Sheeva CPU core which is fully ARMv5TE-compliant with a 256KB L2 Cache. The 88F6281 builds upon Marvells innovative Feroceon family of processors, improves performance, and adds new features to reduce bill of materials (BOM) costs. The 88F6281 is suitable for a wide range of applications such as routers, gateway, media server, storage, settop-box, networking, point of service and printer products. discovery Mv76100, Mv78100 and Mv78200 The MV76100 and MV78100 are high-performance, low-power, highly integrated processors with the Marvell Sheeva CPU technology included. The Sheeva core is an ARMv5TE-compliant CPU core. Built on Marvells innovative Discovery system controller platform, the MV76100 is a complete system-on-chip (SoC) solution. Optimised for cost-sensitive applications, the MV76100 is ideally suited to a wide range of applications ranging from small and medium business (SMB) routers, switches and single board computers, to high-volume laser printer applications. The MV78100 is the perfect solution for a wide range of applications ranging from sophisticated routers, switches and wireless base stations to high-volume laser printers applications. The MV78200 is a dual-core, high-performance, low-power, highly integrated processor with the Marvell Sheeva ARMv5TE-compliant CPU core. Built on Marvells innovative Discovery system controller platform, the MV78200 is a complete system-on-chip (SoC) solution. Optimised for low power operation, the
MV78200 is ideally suited to a wide range of applications ranging from sophisticated routers, switches and wireless base stations to high-volume laser printers applications. Armada 100, 300 The Marvell PXA168 processor is the flagship device in Marvells ARMADA 100 series of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost. The Marvell PXA168 processor is based on a new innovative architecture that delivers the processing capabilities of an entry-level laptop to instant-on, digital consumer and embedded devices by enabling full-featured web browsing, Internet widgets, multi-format video, Adobe Flash based content playback, image processing, video conferencing, and sophisticated ultra-fast graphical user interfaces (GUIs). The Marvell ARMADA 300/310 SoCs are high-performance integrated controllers. The SoCs integrate the Marvell developed CPU core which is fully ARMv5TE compliant with a 256KB L2 Cache. The ARMADA 300/310 builds upon Marvells innovative Feroceon family of processors, improves performance, and adds new features to reduce bill of materials (BOM) costs. The ARMADA 300 (88F6282) is suitable for a wide range of applications such as routers, gateway, media server, storage, thin clients, set-top-box, networking, point of service and printer products. The ARMADA 310 (88F6283) is a low power version that is targeted for computer peripherals, consumer electronics, add-on cards, and small form factor devices such as Plug Computers. The following tables details power to the core solutions from selected Avnet Memec power management suppliers. It shows the Marvell part number and the voltage requirements to power the part for typical voltage and current supply conditions. You can then select a part number from each of our power management offerings.
MArveLL
Marvell Parts vIn 3,3 3,3 3,3 3,3 3,3 3,3 3,3 vout 1 1.1 1.8d 1.8a 2.5 3.3d 3.3a o/p description current typical
88F6281 (Kirkwood)
ISL8022 ISL8022 ISL8010 ISL8010 ISL9008A N/A N/A ISL8022EVAL1Z, ISL8010EVAL1 Use PG or enable for power sequencing, requires external LC CCT to be quiet ISL8022 ISL8022 ISL8088 ISL8088 ISL9008A ISL8088 ISL8088 ISL8022EVAL1Z, ISL8088EVAL1Z Use PG or enable for power sequencing, requires external LC CCT to be quiet
MAX15048 MAX15048 MAX15048 MAX8559 MAX8891EXK35+ N/A N/A MAX15048EVKIT, MAX8559EVKIT PMIC for power sequencing, LDO for analog supply (a), 2.5 LDO is not a necessity MAX15048 MAX15048 MAX15048 MAX8559 MAX8891EXK35+ MAX8559 1/2 MAX8891EXK33+ MAX15048EVKIT, MAX8559EVKIT PMIC for Power sequencing, LDO for analog supply (a), 2.5 LDO is not a necessity
Eval kits Notes Power sequencing required 5 5 5 5 5 5 5 1 1.1 1.8d 1.8a 2.5 3.3d 3.3a
SC183C SC186 SC183C, SC283* SC4212 SC560* N/A N/A Available, see page 26 SC183C SC186 SC183C, SC283 SC4212 SC560* SC560* SC560* Available, see page 26
88F6281 (Kirkwood)
Intersil
Maxim
Semtech
MArveLL
Marvell Parts vIn 12 12 12 12 12 12 12 vout 1 1.1 1.8d 1.8a 2.5 3.3d 3.3a o/p description current typical
88F6281 (Kirkwood)
Mv76100 (discovery)
Mv76100 (discovery)
Mv78100 (discovery)
Mv78100 (discovery)
ISL85001 ISL85001 ISL9008A ISL88550A ISL88550AEVAL1Z, ISL8502EVAL1Z, ISL8500EVAL1Z, MAX15048EVKIT, MAX8559EVKIT ISL85001EVAL1Z, ISL85033DUALEVAL1Z PMIC includes sequencer , 0.9 V single ISL8550A needs external FET LDO, internal FET preset 3v3 out
MArveLL
Marvell Parts vIn 5 5 5 5 5 5 5 5 vout o/p description current typical
Mv78200 (discovery)
1.0 V 1.1 V 1.8 V 0.9 V Info under NDA 3.3 V 3.3 V 2.5 V 1.8 V
Eval kits Notes 12 12 12 12 12 12 12 12 1.0 V 1.1 V 1.8 V 0.9 V Info under NDA 3.3 V 3.3 V 2.5 V 1.8 V
Mv78200 (discovery)
Eval kits Notes 5 5 5 Armada 168 5 5 5 5 Eval kits Notes Power Sequencing Required 1.0 V 1.1 V 1.8 V 1.8a V Info under NDA 3.3a V 3.3 V 2.5 V 1.0 V 1.8 V 3.3 V 3.3a V Info under NDA 1.8 V 5.0 V 0.9 V
PMIC includes sequencer , 0.9 V single LDO, internal FET preset 3v3 out MAX8757 1/2 MAX8757 1/2 MAX8564 1/2 MAX8559 1/2 MAX8559 1/2 MAX8564 1/2 MAX1983 MAX8716EVKIT, MAX8564EVKIT, MAX8559EVKIT MAX8660 also an option for PMIC MAX15048 MAX15048 MAX15048 MAX8559 1/2 MAX8559 1/2 MAX1921EUT33+ MAX8891EXK25+ MAX15048EVKIT, MAX8559EVKIT, MAX1921EVKIT Internal FET preset 3v3 out MAX15048 MAX15048 MAX15048 MAX8559 1/2 MAX8559 1/2 MAX1921EUT33+ MAX8891EXK25+ MAX15048EVKIT, MAX8559EVKIT, MAX1921EVKIT Internal FET preset 3v3 out
3.3, 5, 12 3.3, 5, 12 3.3, 5, 12 Armada 300 3.3, 5, 12 88F6283 3.3, 5, 12 3.3, 5, 12 3.3, 5, 12 Eval kits Notes 5, 12 5, 12 5, 12 Armada 300 5, 12 88F6282 5, 12 5, 12 5, 12 Eval kits Notes
ISL8022 ISL8022 ISL9106 ISL9106 ISL8502 ISL8502 ISL80136 ISL8022EVAL1Z, ISL9106EVAL1Z, ISL8502EVAL1Z
1.0 V 1.1 V 1.8 V 1.8a V Info under NDA 3.3a V 3.3 V 2.5 V
ISL8502 not required if running from 3.3 V ISL8022 ISL8022 ISL8088 ISL8088 ISL8502 ISL8502 ISL9008A ISL8022EVAL1Z, ISL8502EVAL1Z, ISL8088EVAL1Z
Note 1: NDA info the full datasheets contain the voltage descriptions and typical / max. / min. current consumption. Note 2: Please refer to product selector section for specification details of each power product. * These Semtech parts are dual o/p so only one device is required for every 2 outputs
9
ISL9305HIRTZEVAL1Z
ISL8088 ISL8088 ISL8088 ISL88550A ISL88550AEVAL1Z, ISL8088EVAL1Z, ISL8009AEVAL1Z, MAX15048EVKIT, MAX8559EVKIT ISL8033EVAL1Z, ISL8036DUALEVAL1Z PMIC includes sequencer , 0.9 V single ISL8550A needs external FET LDO, internal FET preset 3v3 out ISL8502/8500 MAX15048 ISL85033 MAX15048 ISL88550A MAX15048 MAX16999 ISL85001 MAX1921EUT33+ ISL85001 MAX8559 1/2 ISL9008A MAX8559 1/2 ISL88550A MAX1935 ISL88550AEVAL1Z, ISL8502EVAL1Z, ISL8500EVAL1Z, MAX15048EVKIT, MAX8559EVKIT ISL85001EVAL1Z, ISL85033DUALEVAL1Z
MIcroSeMI
In this brochure we feature SmartFusion. An intelligent mixed signal FPGA that is the only device to integrate an FPGA, ARM Cortex-M3, and programmable analog, offering full customisation, IP protection, and ease-of-use. Based on Actels proprietary flash process, SmartFusion FPGAs are ideal for hardware and embedded designers who need a true system-on-chip (SoC) solution that gives more flexibility than traditional fixed-function microcontrollers without the excessive cost of soft processor cores on traditional FPGAs. Microcontroller Subsystem (MSS) The MSS is composed of a 100 MHz Cortex-M3 processor and integrated peripherals, which are interconnected via a multi-layer AHB bus matrix (ABM). This matrix allows the Cortex-M3 processor, FPGA fabric master, Ethernet medium access controller (MAC), peripheral DMA (PDMA) controller and FPGA fabric to act as masters to the integrated peripherals, embedded non-volatile memory (eNVM), embedded synchronous RAM (eSRAM), external memory controller (EMC), FPGA fabric, and analog compute engine (ACE) blocks. SmartFusion devices at different densities offer various sets of integrated peripherals, including SPI, I2C, and UART serial ports, embedded FlashROM (EFROM), 10/100 Ethernet MAC, timers, phaselocked loops (PLLs), on-board oscillators, real-time counters (RTC), and peripheral DMA controller (PDMA). Programmable Analog Front-end (AFe) SmartFusion devices offer an enhanced analog front-end compared to Fusion devices. The resolutions on successive approximation register analog-to-digital converters (SAR ADC) are user configurable, with 8-, 10- and 12-bit modes available. SmartFusion also adds first order sigma-delta digital-to-analog converters (SDD DAC). With its signal conditioning blocks (SCBs), SmartFusion can handle multiple analog signals simultaneously; SCBs are made of a combination of active bipolar pre-scalers (ABPS), comparators, current monitors and temperature monitors. ABPS modules allow larger bipolar voltages to be fed into the ADC. Current monitors take the voltage across an external sense resistor and convert it to a voltage suitable for the ADC input range. Similarly, the temperature monitor reads the current through an external PNjunction (diode or transistor) and converts it internally for the ADC. The SCB also includes comparators to monitor fast signal thresholds without using the ADC. The output of the comparators can be fed into the analog compute engine or the ADC.
10
Analog compute engine (Ace) The mixed signal blocks found in SmartFusion are controlled and connected to the rest of the system via a dedicated processor called an analog compute engine (ACE). The role of the ACE is to offload control of the analog blocks from the Cortex-M3, thus offering faster throughput or better power consumption compared to a system where the main processor is in charge of monitoring the analog resources. The ACE is built to handle sampling, sequencing, and post-processing of the ADCs, DACs, and SCBs. The following table details power to the core solutions from selected Avnet Memec power management suppliers, specifically cross referencing LTC solutions on the SmartFusion A2F200 development kit and showing power management solutions for the various core power requirements.
MIcroSeMI
Product vIn (v) 5 5 SmartFusion 12 12 12 LT1963AES8 LT3080EMS8E Power Solution on A2F200 dev Kit LT1963AES8 LT3080EMS8E
Note 1: Please refer to product selector section for specification details of each power product. Maxim specific comments: The LT1963 and LT3080 can both be replaced by a MAX8563EEE+, which is a dual nFET controller. SmartFusion power consumption is very dynamic so Maxim has specified parts which can handle the heaviest loads; They have 4 rails that can be generated by switchers. 1.5 V (VCC, analog supply) 1.8 V (I/O) 2.5 V (I/O) 3.3 V(Jtag, I/O, ADC, VPP) 2 x MAX15002ATL+s will generate 2 of these rails each Plus two clean rails generated by LDO;s 3.3 V (charge pump, analog circuitry) 1.5 V (PLL) These can be generated by the MAX8563EEE+
11
PLX
PLX is the leading supplier of I/O interconnect silicon including PCI Express (PCIe), 10GBase-T, USB and other standard input / output (I/O) devices for the server, storage, communications, embedded control and consumer markets. In this brochure we will feature the PCI Express Gen 2 and 3 switches PEX8696 and PEX8748. PeX8696 The ExpressLane PEX 8696 device is the industrys first PCIe switch to offer 96 PCI Express Gen 2 (5.0 GT/s) lanes, capable of configuring up to 24 flexible ports. The switch conforms to the PCI Express Base Specification, rev 2.0. The 96-lane switch enables users to add scalable, high bandwidth, nonblocking interconnection to a wide variety of applications including servers, communications, storage, blade servers, and embedded systems. The PEX 8696 supports the PCI-SIG defined Multicast protocol for PCI Express as well as Multi-root architecture supporting up to eight upstream ports for backplane applications. The PEX 8696 also features an on-chip non-transparent port for dual-host and failover applications, as well as four on-chip Hot-Plug controllers, allowing users to implement single-chip solutions. The device is hardware configurable and software programmable, allowing users to tailor their port configurations and QoS operating characteristics to suit their application requirements. The PEX 8696 comes in a 35 x 35 mm 1156-ball FCBGA and is available in lead-free packaging. This device supports Access Control Services (ACS).
PCIe for Set-Top Box / Home Gateway
RJ11
Front End
CPU
Ethernet PHY
PEX8605
WiFi
GbE
USB 3.0
PeX8604 The ExpressLane PEX 8604 device offers 4 PCI Express Gen 2 (5.0 GT/s) lanes, which allows it to support up to four ports. The switch conforms to the PCI Express Base Specification, rev 2.0. The PEX8604 is the industrys smallest 4-lane Gen 2 device and has the ability to connect the multiple PCI Express endpoints used in a variety of consumer and embedded applications including multi-function printers, wireless Ethernet modules, IO expansion modules, Express-Card applications as well as other low power applications. The PEX 8604 boasts unsurpassed performance with its non-blocking architecture, capable of supporting both host-centric as well as true peer-to-peer traffic on its ports. The PEX 8604 supports x2 port width natively on the upstream port, allowing it to interface directly and seamlessly to the embedded processors commonly used in such applications. The PEX 8604 is offered in a 15 x 15mm 196-ball PBGA and is available in both leaded and lead-free packaging. This device supports Access Control Services (ACS).
12
PeX8748 The ExpressLane PEX 8748 is a 48-lane, 12-port, PCIe Gen 3 switch device developed on 40nm technology. It offers Multi-Host PCI Express switching capability, allowing users to connect multiple hosts to their respective endpoints via scalable, high-bandwidth, non-blocking interconnection to a wide variety of applications including servers, storage, communications, and graphics platforms. The PEX 8748 is well suited for fan-out, aggregation, and peer-to-peer traffic patterns. PLXs proprietary visionPAK debug software comes included, enabling internal receive-eye observation after equalization, for example, or access to the devices internal debug registers, making for a faster time to market. The following table details power to the core solutions from selected Avnet Memec power management suppliers. The table shows the PLX part number and the voltage requirements to power the part for typical voltage and current supply conditions. You can then select a part number from each of our power management offerings.
High-End Motherboard
GPU
CPU Thunderbolt
PLX technoLogy
PLX Part PeX8696 Eval kits Notes PeX8696 Eval kits Notes PeX8604 Eval kits Notes PeX8604 Eval kits Notes PeX8748 Eval kits Notes PeX8748 Eval kits Notes 12 12 0.9 1.8 Info under NDA 5 5 0.9 1.8 Info under NDA 12 12 1 2.5 Info under NDA 5 5 1 2.5 Info under NDA 12 12 1 2.5 Info under NDA vIn 5 5 vout 1 2.5 descrition Info under NDA o/P current
Note 1: NDA info The full datasheets contain the voltage descriptions and typical / max. / min. current consumption. Note 2: Please refer to product selector section for specification details of each power product. * These Semtech parts are dual o/p so only one device is required for every 2 outputs
13
reneSAS
Renesas has the worlds largest share of the market for MCU products with built-in Flash memory. Its extremely wide selection of product families meets all customer needs while helping to create a green society thanks to the companys strength in low-power motors. Superh SuperH is an embedded RISC developed for high cost-performance, miniaturization, and performance per unit of power consumption (MIPS/W). Renesas is developing CPU cores for a wide range of applications and functions and has many products already available. Its product lines include a series with the SH-2 as the CPU core and on chip, large-capacity flash memory, as well as peripheral functions such as timer, serial I/O, and AD converters. There is also a series with the SH-3 or SH-4 as the CPU core, made for high-speed data processing and equipped with cache and MMU. Additionally, there is line-up of series with the SH2-DSP or SH3-DSP as the CPU core which have full DSP functions and an emphasis on multimedia and communications processing. Products currently available also have lots of features, such as low power modes, low power consumption, and small size. Various versatile operating systems and development tools have been improved, allowing for more efficient development. In this brochure we will feature SH7785, SH7724 and SH7762/4. Superh 7724 and 7785 The SH7780 Series (which includes SH7785 and SH7724) is the high-end SuperH processor using the new SH-4A CPU core; the SH-4A instruction set is fully SH-4 upward compatible. Operating frequency in the SH-4A is much faster than in the existing SH-4 CPU core, and the SH-4A CPU core includes an FPU that supports both single-precision and double-precision arithmetic operations. Superh 7262/4 The SH726x series is ideal for use in car audio, home audio, and other digital audio systems. This series incorporates a SH2A-FPU CPU core, enabling audio compression / expansion processing, as well as a CD-Rom decoder and other peripheral functions suitable for audio devices.
14
The table shows the Renesas part number and the voltage requirements to power the part for typical voltage and current supply conditions. You can then select a part number from each of our power management offerings.
reneSAS
renesas Part vIn Battery Li-Ion 3-5V vout 1.1 3.3 1.8 Info under NDA description
Super h 7785
Eval kits Notes 1.2 Battery 1.3 Li-Ion 1.8 3 - 4.2 V 3.3
ISL8013AEVAL2Z, ISL9104AxxxxEVAL1Z MAX8654EVKIT Start up sequence highest to lowest ISL9305, ISL8088 Info under NDA ISL9305, ISL9008 ISL9305, ISL8088 ISL9305IRTZEVAL1Z, ISL8088EVAL1Z Power sequencing required 3, 4.2, 5 1.2 3.3 Info under NDA 1.8 V enables 1.2 V supply for correct sequencing ISL9016 ISL9016 Take 1.1v i/p off 3.3 V MAX15021 MAX8559 1/2 MAX8559 1/2 MAX8559EVKT MAX15021 Dual 2 A / 4 A output MAX15021 MAX15021
Super h 7724
Super h7262/4
Note 1: NDA info The full datasheets contain the voltage descriptions and typical / max. / min. current consumption. Note 2: Please refer to product selector section for specification details of each power product.
15
evAL KIt
ISL6420BEVAL ISL8009AEVAL ISL8010EVAL1 ISL80101-ADJEVAL1Z ISL80102-ADJEVAL1Z
Monolithic 600 mA step-down regulator with low 2.5, 5.5 quiescent current High performance 1 A LDO High performance 2 A linear regulator 40 V, low quiescent current, 50 mA low dropout linear regulator 40 V, low quiescent current, 150 mA low dropout, linear regulator 3 A low quiescent current 1 MHz high efficiency synchronous buck regulator 4 A low quiescent current 1 MHz high efficiency synchronous buck regulator 6 A low quiescent current high efficiency synchronous buck regulator Dual 2 A / 1.7 A low quiescent current 2.25 MHz high efficiency synchronous buck regulator 2.2, 6.0 2.2, 6.0 6, 40 6, 40 2.8, 5.5 2.8, 5.5 2.7, 5.5 2.8, 5.5
ISL8013AEVAL2Z ISL8014AEVAL2Z
Programmable current limit, frequency up to ISL8016CIREVAL1Z 4 MHz, sync between parts Has enable o/p for power sequencing ISL8022EVAL1Z
16
evAL KIt
ISL8033EVAL1Z ISL8036EVAL1Z ISL8088EVAL1Z ISL8201MEVAL1Z ISL8206MEVAL1Z ISL8500EVAL1Z ISL85001EVAL1Z ISL8501EVAL1Z ISL8502EVAL1Z ISL85033EVAL2Z ISL8510EVAL1Z ISL88550AEVAL1Z
3, 3 or 6 in current Integrated MOSFETS small package <1.5 cm2 share mode 0.8, 0.8 10 6 2 1 Has enable o/p for power sequencing Highly integrated MOSFETs, inductors, passive components in 15 x 15 mm package Pin compatible family (8201M, 8204M, 8206M) Small 4 x 3 mm Dual Flat No-Lead (DFN) package Small 4 x 3 mm Dual Flat No-Lead (DFN) package
1 buck o/p, Small 4 x 4 mm Quad Flat No-Lead (QFN) 2 x 500 mA package LDO o/p 2 3, 3 1, 0.3 15, 2.5 150 mA 300 mA 400 mA 150 mA 150 mA, 150 mA 250 mA 500 mA 500 mA 1,2 Dual 800 mA, Dual 300 mA Dual 1.5, Dual 300 mA 10 20 Internal MOSFETs, small packagae 4 x 4 mm QFN Dual channel, internal MOSFETs, small package 4 x 4 mm QFN Integrated switching power MOSFET + 1 LDO Integrated switching power MOSFET + LDO for DDR termination Single low noise, high PSRR LDO High performance low dropout linear regulator High performance LDO 5 Ld SC-70 package Dual channel integrated high peformance LDO Low VIN tiny 4-bump 1.155 mm x 0.975 mm package Integrated MOSFETs, enable for power sequence Integrated MOSFETs, enable for power sequence Integrated MOSFETs, enable for power sequence Integrated mini power management IC (PMIC)
ISL9305
2.3, 5.5
0.8, VIN
ISL9305IRTZEVAL1Z
Integrated mini power management IC (PMIC) True 10 A solution, single o/p integrated MOSFET 3 integrated synchronous buck PWM controllers, very compact and featured solution
17
MAXIM
Maxim is a world leader in power management and battery-charging solutions. Its power management solutions come in space saving packages, include internal switches, buck regulators, programmable output voltage and are available for -40 to +125 C; low noise, high accuracy and low-cost solutions are further benefits of power solutions from Maxim. As a leader in process technologies and with a view to further expanding its industry-leading product portfolio, Maxim is investing a significant amount into R&D and is now averaging one new IC per day. The product selection guide below highlights the most important technical specifications and some of the key differentiators of Maxim power solutions for your core. Maxim also offers more detailed information in the form of over 2500 application notes, technical articles, datasheets, reference designs and EE-Sim, an online design resource helping to create and simulate circuits based on your individual input requirements.
deScrIPtIon Dual, 4 A / 2 A, 4 MHz, step-down DC-DC regulator with tracking / sequencing capability Dual, 4 A / 2 A, 4 MHz, step-down DC-DC regulator with dual LDO controllers 1.425 to 3.6 V input, 500 mA low-dropout regulators with BIAS input Triple-output buck controllers with tracking / sequencing 350 mA, 16.5 V input, low-dropout linear regulators 36 V, 2 A, 2.2 MHz step-down converter with low operating current Ultra-low output voltage, low-quiescent-current linear regulator for high-temperature applications Low-voltage, 400 mA step-down DC-DC converters in SOT23 500 mA, low-voltage linear regulator in tiny QFN Low-input-voltage, 300 mA LDO regulators with RESET in SOT and TDFN Dual, 180 out-of-phase, 1.4 MHz, 750 mA step-down regulator with POR and RSI / PFO Low-voltage, low-dropout linear regulators with external bias supply 2.2 MHz, 2 A buck converters with an integrated high-side switch
vIn MIn
2.5, 5.5
MAX (v)
MAX (A) dIFFerentIAtor Integrated switches for 4 A and 2 A output current; programmable switching frequency from 500 kHz to 4 MHz; 28-PIN TQFN package Integrated switches for 4 A and 2 A output current; two LDO conrollers; 28-PIN TQFN package 2% output accuracy over load, line and temperature; thermally enhanced 3 mm x 3 mm TDFN package
evAL KIt
4, 2
MAX15022 MAX15029
4, 2 500 mA
MAX15022EVKIT
MAX15048
4.7, 23 or 0.6 5 10% 2.7, 16.5 3.5, 36 2.5, 5.5 3.3 5 fixed or 1, 10 0.5, 3.3 1.5, 1.8, 2.5, 3, 3.3 0.8, 4.5
15
4.7 to 23 V or 5 V 10% input voltage range; output voltage adjustable down to 0.6 V; integrated MAX15049EVKIT bootstrap diodes Wide input voltage range; current-limit protection, reverse battery protection wide input voltage range; adjustable output voltage, integrated 2 A internal high-side switch Up to 100 mA output current at TA = +125 C; 13 A quiescent current 400 mA guaranteed output current; internal synchronous rectifier for >90% efficiency Guaranteed 500 mA output current; low 175 mV dropout at 500 mA; 1.5% output voltage accuracy preset at 1.5 V, adjustable from 0.8 to 4.5 V Low minimum input voltage; guaranteed 300 mA output current; 2.5% accuracy over load / line / time Current-mode, 1.4 MHz fixed-frequency PWM operation; 1% output accuracy over load, line, temperature; ultra-compact design with smallest external components Low-cost; no minimum load current required; Integrated power MOSFET; programmable switching frequnecy MAX1921EVKIT
350 mA 2 100 mA
MAX1921EUT33
2, 5.5
400 mA
MAX1935
2.25, 5.5
500 mA
MAX1963A
1.62, 3.6
0.75, 3
300 mA
MAX1970
2.6, 5.5
MAX1972EVKIT
MAX1983 MAX5088
1.25, 5.5
MAX1982EVKIT MAX5089EVKIT
18
deScrIPtIon Low-cost, wide input range, step-down controllers with foldback current limit Dual, 300 mA, low-noise linear regulator with independent shutdown in UCSP or TDFN 1%, ultra-low output voltage, dual and triple linear n-FET controllers 1%, ultra-low output voltage, dual and triple linear n-FET controllers Dual 300 mA pin-programmable low-dropout linear regulators with reset or low-noise output in a tiny 2 mm x 2 mm DFN package 12 V, 8 A, 1.2 MHz, step-down regulator Highly integrated, 25 A, wide-input, internal MOSFET, step-down regulator Single / multiphase, step-down, DC-DC converter delivers up to 25 A per phase Digital power-supply controller / monitor with PMBus interface Interleaved high-efficiency, dual power-supply controllers 12 V, ultra-low-IQ, low-dropout linear regulators with POK High PSRR, low-dropout, 150 mA linear regulators
vIn MIn
2.7, 28 2.5, 6.5 5, 12 5, 12
MAX (v)
MAX (A) dIFFerentIAtor Low cost external components; no additional bias supply needed; up to 95% efficiency Low noise; small ceramic output capacitors; 300 mA output current for each LDO
evAL KIt
300 mA
MAX8559EVKIT
3000 mA 3 Outputs; 1% feedback regulation 3000 mA 2 Outputs; 1% feedback regulation Pin-programmable output voltages; low 90 mV dropout at 100 mA load Internal MOSFET; guaranteed 8 A output current; excellent design flexibility Integrated MOSFET; up to 1.2 MHz switching frequencies Integrated MOSFET; improves efficiency Complete control / monitoring of any power supply with PMBus interface No current sense resistor needed; fixed switching frequency (200 kHz, 300 kHz, 500 kHz) 3.5 A supply current at 12 V; reverse battery protection Space saving; excellent load / line transient Space saving; excellent load / line transient; low ground current Space saving; excellent load / line transient; low ground current MAX8654EVKIT MAX8716EVKIT MAX8564EVKIT
MAX8636
2.7, 5.5
1.5, 3 0.6, 0.85*VIN 0.7, 5.5 0.7, 5.5 n.a. 3.3, 5 or 1:5.5 adj. 1.8 or 2.5 or 3.3 or 5 1.5:4.5 1.5:4.5 1.5:4.5 1.5:4.5
300 mA
MAX8633EVKIT
MAX8654EVKIT MAX8655EVKIT
MAX8891EXK33+ High PSRR, low-dropout, 150 mA linear regulators MAX8891EXK25+ High PSRR, low-dropout, 150 mA linear regulators MAX8891EXK33+ High PSRR, low-dropout, 150 mA linear regulators
19
SeMtech
greener, Smarter, Smaller An established leader in power management ICs for networking and industrial power, handheld power and LED lighting applications, Semtech is pushing performance to higher levels in its quest to enable a totally new class of smarter, smaller and greener end products. Semtechs vast product range comprises switching regulators, PWM controllers, digital controllers, charge pumps, LED drivers, linear regulators, MOSFET drivers, battery chargers, hot swap controllers, references and several special function devices, such as the MicroBuddy range of MCU support devices, ACPI controller, multi-phase link controllers, etc. ecoSpeed convertors Based on the patented Adaptive On-Time (AOT) architecture, the new family of EcoSpeed converters provides high efficiency across the entire load range with a power save (PSAVE) feature that lowers the switching frequency to cater to lowpower standby requirements. This reduces power FET gate charge switching losses and results in greater than 90% peak standby efficiency during light loads. When the load changes from standby to steady state, the EcoSpeed converter cycleby-cycle response quickly exits PSAVE mode, providing very fast wake-up recovery time. An ultrasonic power save (UPSAVE) option maintains switching frequencies above 25 kHz to eliminate audible noise during standby. All EcoSpeed converters offer SmartDrive, a two-step, high-side FET turn-on scheme that reduces EMI. The adaptive on-time pseudo-fixed frequency core used in EcoSpeed converters enables a very fast transient response; this is due to the response time being controlled by a fast comparator, instead of the relatively slow error amplifier found in conventional voltage mode and current mode control topologies. In addition, this reduces the size of the power components used in the system, while the fast transient response also enables the output capacitance to be reduced. EcoSpeed converters are a new class of DC-DC regulators and controllers which use Semtechs patented AOT architecture to enable: Very high efficiency across the entire load range Ultra-fast transient response Easy-to-use, small and highly integrated solutions AOT topology dynamically adjusts the on-time control based on input and output voltages. This results in pseudo-fixed frequency operation with 15% accuracy similar to voltage mode and current mode, and better than constant on-time and hysteretic topologies. The AOT core simplifies design and reduces component count: Eliminating the need for loop compensation components, And enabling the use of ceramic input/output capacitors.
20
To make designing with Semtech devices easy, the online design simulation tool - C-SIM - provides significant help.
PArt nuMBer
SC120 SC171 SC172 SC173 SC174 SC183C SC186 SC195 SC197 SC2441A SC2443 SC2442(H) SC2672 SC283 SC402B SC403 SC410 SC418 SC4212 SC4213H SC4501 SC4524D SC560 SC630
vIn
0.7 - 4.5 V 3.0 - 5.5 V 3.0 - 5.5 V 3.0 - 5.5 V 3.0 - 5.5 V 2.9 - 5.5 V 2.9 - 5.5 V 2.9 - 5.5 V 2.9 - 5.5 V 1.8 - 20 V 4.7 - 16 V
vout
1.8 - 5 V 0.75 - 95% VIN 0.75 - 95% VIN 0.75 - 95% VIN 0.75 - 95% VIN 0.8 - 3.3 V 0.8 - 3.3 V 0.8 - 3.3 V 2x 0.8 - 3.3 V 0.5 - 88% VIN 0.5 - 88% VIN
Iout MAX
190 mA 1A 2A 3A 4A 2A 4A 500 mA 2x500 mA 20* / 20* / 0,6 A 20* / 20* 10* / 10* 20* / 20* 2x1,8 A 10 A 6A 3A 30 A* + 200 mA 1A 0,5 A 2,8 A 2A 2 x 300 mA 400 mA
tyPe
Step-up DC/DC DC/DC DC/DC DC/DC DC/DC Step-down DC/DC Dual DC/DC Dual controller + LDO Dual controller Dual controller Dual controller Dual DC/DC DC/DC DC/DC DC/DC DC/DC + LDO LDO LDO Step-Up DC/DC Dual LDO Charge pump
FeAtureS
Power save+ mode maximises, efficiency at light load EcoSpeed regulator, fast transient response EcoSpeed regulator, fast transient response EcoSpeed regulator, fast transient response EcoSpeed regulator, fast transient response 4-bit programmable VOUT Fifteen pre-determined output voltages via four control pins 4-bit programmable VOUT 4-bit programmable VOUT Ext Synch, 2phase capability with current sharing Ext Synch, hiccup overload, sink / source capable Ext Synch, hiccup overload No synch, high efficiency simple controller 4-bit programmable VOUT, 100% duty cycle EcoSpeed regulator with prog soft start, integrated LDO w/crossover circuit, fast transient response EcoSpeed regulator with prog soft start, integrated LDO w/crossover circuit, fast transient response EcoSpeed regulator, fast transient response EcoSpeed regulator with prog soft start, integrated LDO w/crossover circuit, fast transient response Very low input voltage and very low dropout Very low input, very low dropout Prog soft start, SEPIC conf. possible Prog soft start, hiccup overload protection, with freq. foldback Power Good flag, dual enable, low noise 2x, 1,5x and 1x pass-through LDO mode
4.75 - 30 V/36 V(H) 0.5 - 85% VIN 3 - 15 V 2.9 - 5.5 V 3.0 - 28 V 3.0 - 28 V 5.5 - 24 V 3.0 - 28 V 1.5 - 5.5 V 1.4 - 6 V 1.4 - 16 V 3.0 - 18 V 2.5 - 5.5 V 2.9 - 5.5 V 0.9 - 90% VIN 2x 0.8 - 3.3 V 0.6 - 5.5 V 0.6 - 5.5 V 0.75 - 7.5 V 0.5 - 5.5 V 0.5 - 5.0 V 0.5 - 5.85 V 1.4 - 32 V 1.0 - 96% VIN 1.2 - 3.3 V 3.3 V
21
ISL8088evB The ISL8088 EVAL1Z kit is intended for use by individuals with requirements for point-of-load applications sourcing from 2.75 to 5.5 V. The ISL8088EVAL1Z evaluation board is used to demonstrate the performance of the ISL8088 low quiescent current mode converter. ISL6420evB The ISL6420 evaluation board highlights the operation of the IC in an embedded application. The evaluation board is configured for an output voltage of 3.3 V and 10 A maximum load and is shipped ready to use right from the box. The board has been optimised for a 12 V input from a standard power supply but can accept a range from 4.5 to 16 V. The board can be connected to the source and load with the help of stand-off terminals provided. ISL8022evB The ISL8022EVAL1Z kit is intended for use by individuals with requirements for pointof-load applications sourcing from 2.8 to 5.5 V. The ISL8022EVAL1Z evaluation board is used to demonstrate the performance of the ISL8022 low quiescent current mode converter. ISL8013evB The ISL8013AEVAL2Z kit is intended for use by individuals with requirements for pointof-load applications sourcing from 2.7 to 5.5 V. The ISL8013AEVAL2Z evaluation board is used to demonstrate the performance of the ISL8013A low quiescent current mode converter.
22
ISL9106evB The ISL9106EVAL1Z is an evaluation kit for the ISL9106 1.6 MHz 1.2 A low quiescent current, high efficiency integrated step-down regulator. The ISL9106 is capable of delivering up to 1.2 A output current with an output voltage range of 0.8 V to ~VIN. The output voltage is set by two voltage divider resistors of R1 and R2 on the board with the default output voltage set to be 1.6 V. ISL95210evB Increasing demand for circuit board real estate necessitates the use of increased integration to reduce component count, to which effect Intersil has introduced the ISL95210 regulator. It features integrated power MOSFET switches that are capable of delivering 10 A. Refer to AN1485 ISL95210 10 A Integrated FET regulator eval board set-up procedure for more details. ISL8201MevB The ISL820xMEVAL1Z POL module evaluation board can be used to evaluate the performance of the Intersil ISL8201M, ISL8206M, or ISL8204M POL modules. This board consists of power and load connectors for source and load side, switches for PVCC bias selection and On/Off option, and other passive components. The input voltage range is from 1 to 20 V, and the output voltage range is from 0.6 to 5 V for the ISL8201M. ISL8206MevB The ISL820xMEVAL1Z POL module evaluation board can be used to evaluate the performance of the Intersil ISL8201M, ISL8206M, or ISL8204M POL modules. This board consists of power and load connectors for source and load side, switches for PVCC bias selection and On/Off option, and other passive components. The input voltage range is from 1 to 20 V, and the output voltage range is from 0.6 to 6 V for the ISL8206M. ISL8500evB The ISL8500EVAL1Z REV A kit is intended for use by individuals with requirements for point-of-load applications sourcing from 4.5 to 25 V. The ISL8500EVAL1Z evaluation board is used to demonstrate the performance of the ISL8500 standard buck regulator. ISL8502evB The ISL8502 is a synchronous buck controller with internal MOSFETs packaged in a small 4 x 4 mm QFN package. The ISL8502 can support a continuous load of 2 A and has a very wide input voltage range. With the switching MOSFETs integrated into the IC, the complete regulator footprint can be very small and provide a much more efficient solution than a linear regulator.
23
MAXIM
Maxim has multiple ways to support you with your design requirements, including: application notes and technical articles over 2000 technical publications, application notes, tutorials, reference designs, design guides and engineering journals. Maxim also provides design tools, models and software. The software and models include Spice/IBIS/BSDL/CAD, power supply cookbook designs and on-line calculators. Maxim also have EE-sim which is a simulation tool. Examples of evaluation boards to support the power to the core products covered in this brochure are listed below.
The MAX1972 evaluation kit (EV kit) is a fully assembled and tested circuit board that evaluates the MAX1970 family of dual step-down regulators. The circuit operates from an input voltage of 2.6 to 5.5V, and delivers a minimum of 750 mA on each output. The output voltages are programmable from 0.8 V to VIN using external feedback resistors, or they can be preset to 3.3 V or 1.8 V for output 1, and 2.5 V or 1.5 V for output 2. The board has a MAX1972 installed, but it can also be used to evaluate the MAX1970 and the MAX1971. The MAX1971 features a reset input (RSI), while the MAX1970/MAX1972 feature a power-fail output (PFO). The MAX1982 ev kit is a fully assembled and tested surface-mount printed circuit (PC) board. The board is shipped with a fixed 1.2 V output MAX1982 IC, and can also be used to evaluate the MAX1983 (adjustable output). Additional pads are provided on the boards component side to accommodate the external components used with the MAX1983. The MAX5089 ev kit is a fully assembled and tested circuit board that evaluates the MAX5089 synchronous buck converter IC with an integrated high-side n-channel MOSFET. The MAX5089 EV kit is configured as a buck converter that operates over a wide 5.5 to 16 V input voltage range, and provides up to 2 A at the 3.3 V output.
24
The MAX8564 ev kit is a fully assembled and tested circuit board that evaluates the MAX8564 dual linear n-FET controller. The MAX8564 circuit generates a 1.5 V output voltage at load currents up to 1.5 A from a 1.8 V input voltage and a 1.05 V output voltage at load currents up to 3 A from a 1.2 V input voltage. The VDD bias supply permits operation from 5 V or 12 V rails. The MAX8564 EV kit can also evaluate the MAX8563. The MAX8633 ev kit is a fully assembled and tested surface-mount circuit board that contains a dual-output low-dropout (LDO) linear regulator. The EV kit operates from a 2.7 to 5.5 V input supply, is configured for 2.8 V (OUT1) and 1.8 V (OUT2), and can deliver up to 300 mA at each output. The MAX8633 outputs can be set to 9 different output voltage settings. The MAX8633 EV kit can also evaluate the MAX8634, MAX8635, and MAX8636 dual-output LDO linear regulators. The MAX8654 ev kit is a fully assembled and tested PCB that demonstrates the capabilities of the MAX8654 integrated 8 A step-down regulator. The EV kit generates a 3.3 V output voltage at load currents up to 8 A from a 4.5 to 14 V input voltage range. The MAX8654 switches at 500 kHz and provides over 93.4% efficiency with the supplied components. The MAX8655 ev kit is a fully assembled and tested surface-mount PCB that contains a fixed-frequency, pulse-width modulated (PWM) stepdown switching regulator. The MAX8655 EV kit provides a 1.2 V output voltage from a 10.8 to 13.2 V input source and delivers up to 20 A output current. The MAX8655 IC features internal high-side and low-side power MOSFETs. The MAX8716 ev kit demonstrates the MAX8716s standard application circuit. This dual-PWM synchronous DC-DC converter steps down highvoltage batteries and / or AC adapters, generating main supplies for notebook computers. The MAX8716 EV kit provides dual +5 V and +3.3 V output voltages from +6 to +24 V battery input range. It delivers up to 5 A output current for the +5 V output and 5 A for the +3.3 V output with 95% efficiency. The EV kit operates at 300kHz switching frequency and has superior line- and load-transient response.
25
SeMtech
Semtech offers a unique service in providing power management evaluation boards tailor made to customer specifications; this is why there are no product ordering numbers listed. Please direct your inquiry (including the details of the power needs of your application) to your Avnet Memec contact, and we will supply you with the board(s) you require. Turn-around time from your order to receiving the boards is around ten working days. The following Semtech evaluation kits are examples of boards developed according to specific customer requirements.
Sc183c eval Kit The SC183C is a 2 A synchronous step-down regulator designed to operate with an input voltage range of 2.9 to 5.5 Volts. The device offers fifteen predetermined output voltages via four control pins programmable from 0.8 to 3.3 Volts; the control pins allow for on-the-fly voltage changes. The SC183C is also capable of adjusting output voltage via an external resistor divider, easily accessible on the board. Connecting CTL0 CTL3 to logic low forces the device into shutdown mode reducing the supply current to less than 1 A. Connecting any of the control pins to logic high enables the converter and sets the output voltage. The device operates with a fixed 2.5 MHz oscillator frequency, allowing the use of small-surface mount external components. Other features include under-voltage lockout, soft-start to limit in-rush current, and protection from overheating. Sc283 eval Kit The SC283 is the dual channel version of the SC183, capable of delivering 2 x 1,8 A. The control pins on both devices allow for on-the-fly voltage changes, enabling system designers to implement dynamic power savings. Sc410evB The SC410 is one of the new EcoSpeed family, providing very high power density, excellent transient response and most of all, high efficiency over the entire load range. The new topology can be used to exclude external loop compensation, and includes features such as cycle-by-cycle current limiting, programmable switching frequency and an ultrasonic power save mode.
26
typical System diagram: Selected device Identifier Diagram for use by customers and AVM sales to identify selected parts from the brochure suitable for use in the design and development of end equipment.
Switching Controllers Part No 1 _______________ Part No. 2 _______________ Part No. 3 _______________
0.9 V
Power Factor Correction (PFC) Integrated Switching Regulators Part No 1 _______________ Part No. 2 _______________ Part No. 3 _______________
Primary Controller
1.0 V
1.1 V
1.2 V
EMI Filters
AC Input
Supervisory and Sequencing Part No 1 _______________ Part No. 2 _______________ Part No. 3 _______________ Linear Regulators Part No 1 _______________ Part No. 2 _______________ Part No. 3 _______________
1.5 V
1.8 V
FPGA
2.5 V
3.6 V
Power Management Unit eg Dual Buck Reg +LDO Part No 1 _______________ Part No. 2 _______________ Part No. 3 _______________
5.0 V
27
LocAtIonS
AuStrIA Avnet Memec (Avnet EMG Elektronische Bauelemente GmbH) Schnbrunner Str. 297 - 307 A-1120 Vienna Phone +43 1 86642 500 Fax +43 1 86642 550 vienna@avnet-memec.eu BeLgIuM Avnet Memec (Avnet Europe Comm. VA) Maaltecenter Blok G Derbystraat 299 B-9051 Gent Phone +32 9 243 70 70 Fax +32 9 243 70 79 gent@avnet-memec.eu czech reP, croAtIA, hungAry, SerBIA, SLovAKIA, SLovenIA Avnet Memec (Avnet EMG Elektronische Bauelemente GmbH) Schnbrunner Str. 297307 A-1120 Vienna Phone +43 1 86642 590 Fax +43 1 86642 551 vienna@avnet-memec.eu denMArK Avnet Memec (Avnet Nortec A/S) Ellekr 9 DK-2730 Herlev Phone +45 43 22 80 30 Fax +45 43 22 80 31 herlev@avnet-memec.eu FInLAnd, eStonIA Avnet Memec (Avnet Nortec Oy) Pihatrm 1 B FIN-02240 Espoo Phone +358 207 499 250 Fax +358 207 499 255 espoo@avnet-memec.eu FrAnce Avnet Memec (Avnet EMG France SA) 14 avenue Carnot F-91349 MASSY Cedex Phone +33 1 64 47 90 80 Fax +33 1 64 47 90 99 paris@avnet-memec.eu Avnet Memec (Avnet EMG France SA) 33, Rue du Docteur G. Levy Parc Club du moulin Vent Batiment 40 F-69693 Venissieux Phone +33 4 72 14 84 00 Fax +33 4 72 14 10 03 lyon@avnet-memec.eu Avnet Memec (Avnet EMG France SA) Espace Vilaine - 35, Avenue des Peupliers F-35510 Cesson Svign Phone +33 2 99 83 60 60 Fax +33 2 99 83 60 69 rennes@avnet-memec.eu Avnet Memec (Avnet EMG France SA) Parc de la Plaine - 35 Avenue Marcel Dassault - BP5867 F-31506 Toulouse Cedex Phone +33 5 62 47 47 70 Fax +33 5 62 47 47 66 toulouse@avnet-memec.eu Avnet Memec (Avnet EMG France SA) Parc de lInnovation Technologique 1, Rue Gruninger F-67400 Illkirch-Graffenstaden Phone +33 3 88 39 69 03 strasbourg@avnet-memec.eu
gerMAny Avnet Memec (Avnet EMG GmbH) Wilhelmstrae 1 D-59439 Holzwickede Phone +49 2301 919-0 Fax +49 2301 919 200 holzwickede@avnet-memec.eu Avnet Memec (Avnet EMG GmbH) Gutenbergstrae 15 D-70771 Leinfelden-Echterdingen Phone +49 711 782 60 03 Fax +49 711 782 60 555 stuttgart@avnet-memec.eu Avnet Memec (Avnet EMG GmbH) Gruber Strae 60c D-85586 Poing Phone +49 8121 775-0 Fax +49 8121 775 594 poing@avnet-memec.eu greece Avnet Memec Anaxagora 1 Tavros GR-17778 Athens Phone +30 22910-55831 Fax +30 22910-54847 greece@avnet-memec.eu ItALy Avnet Memec (Avnet EMG Italy SRL) Via Manzoni, 44 I-20095 Cusano Milanino (MI) Phone + 39 02 66092 1 Fax + 39 02 66092 496 milan@avnet-memec.eu Avnet Memec (Avnet EMG Italy SRL) Viale dell Industria, 23 I-35129 Padova Phone +39 049 78 18 116 Fax +39 049 77 30 36 padova@avnet-memec.eu netherLAndS Avnet Memec (Avnet B.V.) Takkebijsters 2 NL-4817BL Breda Phone +31 76 5722800 Fax +31 76 5722808 breda@avnet-memec.eu norwAy Avnet Memec (Avnet Nortec AS) Ryensvingen 3B Pb 101 Manglerud N-0680 Oslo Phone +47 66 77 97 00 Fax +47 66 77 97 01 oslo@avnet-memec.eu PoLAnd, roMAnIA, BuLgArIA, LAtvIA, LIthuAnIA Avnet Memec (Avnet EM Sp. z o.o.) ul. Staromiejska 7 PL-40-013 Katowice Phone +48 32 337 56 20 Fax +48 32 337 56 20 ext. 25 katowice@avnet-memec.eu PortugAL Avnet Memec Tower Plaza Rotunda Edgar Cardoso, 23 - 14 andar, Sala E P-4400-676 Vila Nova de Gaia Phone +351 22 377 95 02 Fax +351 22 377 95 03 porto@avnet-memec.eu ruSSIA, uKrAIne, BeLAruS Avnet Memec Korovinskoye Chausse 10, Building 2, Office 31 RUS-127486 Moscow Phone +7 495 937 87 08 Fax +7 495 937 12 63 moscow@avnet-memec.eu
SPAIn Avnet Memec (Avnet Iberia SA) C/ Chile, 10 off. 222 E-28290 Las Matas (Madrid) Phone +34 91 372 71 19 Fax +34 91 372 72 13 madrid@avnet-memec.eu Avnet Memec (Avnet Iberia SA) C/ Mallorca 1-23. 2 plta. Oficina 1-A. E-08014 Barcelona Phone: +34 93 327 85 43 Fax: +34 93 425 05 44 barcelona@avnet-memec.eu Avnet Memec (Avnet Iberia SA) Plaza Zabalgane 12. Bajo Izda. E-48960 Galdacano. Vizcaya. Phone: +34 944 572 777 Fax: +34 944 568 855 bilbao@avnet-memec.eu Sweden Avnet Memec (Avnet Nortec AB) Esplanaden 3D S-172 67 Sundbyberg Phone +46 8 587 46 300 Fax +46 8 587 46 301 sundbyberg@avnet-memec.eu SwItzerLAnd Avnet Memec (Avnet EMG AG) Gaswerkstr. 32 CH-4900 Langenthal Phone +41 62 919 55 55 Fax +41 62 919 55 00 langenthal@avnet-memec.eu turKey Avnet Memec 19 Mays Mah. Smer Sok. Smko Sitesi L2 Kozal Residence D:8 TR-Erenky, Istanbul Phone +90 21 63 72 64 72 Fax +90 21 63 72 66 33 istanbul@avnet-memec.eu uK & IreLAnd Avnet Memec (Avnet EMG Ltd.) Suite 4, First Floor Oxford House Oxford Road Thame Oxfordshire OX9 2AH, UK Phone +44 1844 263600 Fax +44 1844 263601 thame@avnet-memec.eu
This document provides a brief overview only, no binding offers are intended. Avnet disclaims all representations, warranties and liabilities under any theory with respect to the product information, including any implied warranties of merchantability, fitness for a particular purpose, title and/or non-infringement, specifications, use, legal compliance or other requirements. Product information is obtained by Avnet from its suppliers or other sources deemed reliable and is provided by Avnet on an AS IS basis. No guarantees as to the accuracy or completeness of any information are made. All information is subject to change, modifications and amendments without notice.
www.avnet-memec.eu