Académique Documents
Professionnel Documents
Culture Documents
May 2001
EN 1011-2
Supersedes DIN 8528-2, March 1975 edition.
National foreword
This standard has been prepared by CEN/TC 121 Welding, SC 4 Quality management in the field of welding. The responsible German body involved in its preparation was the Normenausschuss Schweitechnik (Welding Standards Committee), Technical Committee Grundlagen der Qualittssicherung beim Schweien. DIN V 1738 is the standard corresponding to Technical Report CR ISO 15608 referred to in clause 2 of the EN. Amendments DIN 8528-2, March 1975 edition, has been superseded by the specifications of EN 1011-2. Previous edition DIN 8528-2: 1975-03.
National Annex NA
Standard referred to
(and not included in Normative references) DIN V 1738 Welding Guidelines for a metallic material grouping system (CR ISO 15608 : 2000)
No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen).
EN 1011-2
January 2001
ICS 25.160.10
English version
Welding
This European Standard was approved by CEN on 2000-07-06. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Management Centre: rue de Stassart 36, B-1050 Brussels
2001. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members.
4 5
A 0,30
B 0,34
C 0,38
D 0,44
E 0,46
4 5
A 0,34
B 0,39
C 0,41
D 0,46
E 0,48
4 5
A 0,38
B 0,41
C 0,43
D 0,48
E 0,50
4 5
A 0,41
B 0,43
C 0,45
D 0,50
E 0,52
4 5
A 0,43
B 0,45
C 0,47
D 0,53
E 0,55
4 5
A 0,45
B 0,47
C 0,49
D 0,55
E 0,57
4 5
A 0,47
B 0,49
C 0,51
D 0,58
E 0,60
4 5
A 0,49
B 0,51
C 0,53
D 0,60
E 0,62
4 5
A 0,51
B 0,53
C 0,55
D 0,62
E 0,64
4 5
A 0,53
B 0,55
C 0,57
D 0,64
E 0,66
4 5
A 0,55
B 0,57
C 0,59
D 0,66
E 0,68
4 5
C 0,60
D 0,68
E 0,70
5 A 0,62 0,70 B C D E