Académique Documents
Professionnel Documents
Culture Documents
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
Standards published
New International Standards published between 01 June and 30 June 2011 * Available in English only ** French version of standard previously published in English only
Price group
IIW
ISO 14372:2011
TC 6
ISO 2493-1:2010
TC 8
ISO 22488:2011
TC 12
ISO 80000-5:2007
TC 17
ISO 16120-1:2011
Steel
Non-alloy steel wire rod for conversion to wire Part 1: General requirements L
ISO 16120-2:2011
Non-alloy steel wire rod for conversion to wire Part 2: Specific requirements for general-purpose wire rod
ISO 16120-3:2011
Non-alloy steel wire rod for conversion to wire Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod Non-alloy steel wire rod for conversion to wire Part 4: Specific requirements for wire rod for special applications
ISO 16120-4:2011
TC 20
ISO 17566:2011
TC 21
ISO 7240-11:2011
TC 22
ISO 22901-2:2011
Road vehicles
* Road vehicles Open diagnostic data exchange (ODX) Part 2: Emissions-related diagnostic data W
TC 23
ISO/TS 11356:2011 ISO 1178311:2011
Tractors and machinery for agriculture and forestry Serial control and communications data network Part 11: Mobile data element dictionary
TC 28
ISO 13738:2011
TC 29
ISO 1641-2:2011
Small tools
End mills and slot drills Part 2: Dimensions and designation of milling cutters with Morse taper shanks C
ISO 1641-3:2011
End mills and slot drills Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
TC 31
ISO 10571:2011
TC 38
ISO 139:2005/Amd 1:2011
Textiles
Textiles Standard atmospheres for conditioning and testing Amendment 1 XZ
TC 43
ISO 10302-2:2011
Acoustics
* Acoustics Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Part 2: Structure-borne vibration measurements M
TC 59
ISO 11863:2011
TC 61
ISO 1792:1997/Amd 1:2011
Plastics
* Plastics Determination of Charpy impact properties Part 2: Instrumented impact test Amendment 1: Precision data XZ
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
* Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) * Petroleum and natural gas industries Field testing of drilling fluids Part 2: Oil-based fluids U
ISO 21809-1:2011
ISO 10414-2:2011
XC
ISO 13501:2011
* Petroleum and natural gas industries Drilling fluids Processing equipment evaluation
* Petroleum and natural gas industries Design and operation of subsea production systems Part 4: Subsea wellhead and tree equipment Technical Corrigendum 1 Petroleum and natural gas industries Drilling and production equipment Part 1: Side-pocket mandrels
free
ISO 11960:2011
* Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
XF
TC 69
ISO 7870-4:2011
Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection Amendment 1
XZ
TC 79
ISO 7271:2011
TC 89
ISO 12460-5:2011
Wood-based panels
* Wood-based panels Determination of formaldehyde release Part 5: Extraction method (called the perforator method) F
TC 106
ISO 6875:2011
Dentistry
* Dentistry Patient chair D
TC 107
ISO 28706-5:2010
TC 122
ISO 11156:2011
Packaging
* Packaging Accessible design General requirements G
TC 150
ISO 7207-2:2011
TC 156
ISO 8565:2011
TC 164
ISO 376:2011
TC 165
ISO 22452:2011
Timber structures
* Timber structures Structural insulated panel walls Test methods N
TC 171
ISO/TR 14105:2011 ISO 19005-2:2011
32000-1 (PDF/A-2)
TC 172
ISO 19012-1:2011
TC 184
ISO 16100-6:2011
TC 188
ISO 6185-4:2011
Small craft
Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater N
TC 201
ISO 28600:2011
TC 202
ISO/TS 24597:2011
Microbeam analysis
Microbeam analysis Scanning electron microscopy Methods of evaluating image sharpness X
TC 206
ISO 10677:2011
Fine ceramics
Fine ceramics (advanced ceramics, advanced technical ceramics) Ultraviolet light source for testing semiconducting photocatalytic materials C
TC 211
ISO 19110:2005/Amd 1:2011
Geographic information/Geomatics
* Geographic information Methodology for feature cataloguing Amendment 1 S
TC 217
ISO 29621:2010
Cosmetics
Cosmetics Microbiology Guidelines for the risk assessment and identification of microbiologically low-risk products E
TC 219
ISO 10965:2011
Floor coverings
* Textile floor coverings Determination of electrical resistance C
TC 242
ISO 50001:2011
Energy Management
Energy management systems Requirements with guidance for use L
TMB
ISO/IEC Guide 981:2009
IULTCS
ISO 17076-2:2011
JTC 1
ISO/IEC 10995:2011 ISO/IEC 197763:2011
Information technology
* Information technology Digitally recorded media for information interchange and storage Test method for the estimation of the archival lifetime of optical media * Information technology Computer graphics, image processing and environmental data representation Extensible 3D (X3D) encodings Part 3: Compressed binary encoding N
ISO/IEC 97972:2011 ISO/IEC 24745:2011 ISO/IEC 230062:2011 ISO/IEC 248002:2011 ISO/IEC 19756:2011 ISO/IEC 197882:2011 ISO/IEC TR 29127:2011
* Information technology Security techniques Message Authentication Codes (MACs) Part 2: Mechanisms using a dedicated hash-function * Information technology Security techniques Biometric information protection
* Information technology JPSearch Part 2: Registration, identification and management of schema and ontology * Information technology Topic Maps Constraint Language (TMCL)
* Information technology Learning, education and training Metadata for learning resources Part 2: Dublin Core elements * Information technology System Process and Architecture for Multilingual Semantic Reverse Query Expansion
Standards confirmed
The following International Standards are confimred for a five year period:
TC 4
ISO 10285:2007
Rolling bearings
TC 17
ISO 6305-2:2007
Steel
TC 22
ISO 9258:1989 ISO 9619:1992 ISO 9704:1990 ISO 13988:2008
Road vehicles
(reconfirmed) (reconfirmed) (reconfirmed)
TC 29
ISO 8486-1:1996 ISO 21949:2001 ISO 21951:2001
Small tools
(reconfirmed) (reconfirmed) (reconfirmed)
TC 34
ISO 5544:2008 ISO 5545:2008
Food products
TC 37
ISO 15188:2001
TC 38
ISO 858:1973 ISO 1531:1973 ISO 1532:1973 ISO 3505:1975 ISO 9073-9:2008 ISO 9865:1991 ISO 10528:1995
Textiles
(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)
(reconfirmed) (reconfirmed)
TC 70
ISO 4548-9:2008
TC 85
ISO 12794:2000 ISO 14146:2000 ISO 18589-2:2007 ISO 1709:1995 ISO 7476:2003 ISO 7753:1987 ISO 8298:2000 ISO 9006:1994 ISO 9279:1992 ISO 9889:1994 ISO 9891:1994 ISO 9892:1992 ISO 9894:1996 ISO 10980:1995 ISO 12184:1994 ISO 12800:2003 ISO 13463:1999 ISO 18213-1:2007 ISO 18213-2:2007 ISO 21238:2007 ISO 21847-1:2007
(reconfirmed)
(reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed)
(reconfirmed)
TC 92
ISO 11925-3:1997 ISO 14697:2007
Fire safety
(reconfirmed)
TC 96
ISO 10245-1:2008
Cranes
TC 107
ISO 15730:2000
TC 113
ISO 3846:2008 ISO 4360:2008
Hydrometry
TC 131
ISO 4393:1978 ISO/TR 10771-2:2008
TC 138
ISO 18373-2:2008
TC 150
ISO 16061:2008 ISO 7206-1:2008
TC 171
ISO 10198:1994 ISO 10550:1994
TC 172
ISO 517:2008 ISO 8478:1996 ISO 9039:2008 ISO 10109-7:2001 ISO 10109-11:2001 ISO 10110-9:1996 ISO 13653:1996 ISO 15368:2001 ISO 9211-3:2008 ISO 8576:1996 ISO 11810-2:2007
(reconfirmed)
(reconfirmed)
TC 188
Small craft
(reconfirmed) (reconfirmed)
TC 199
ISO 13857:2008
Safety of machinery
TC 206
ISO 15490:2008
Fine ceramics
TC 220
ISO 21011:2008 ISO 21013-2:2007
Cryogenic vessels
JTC 1
ISO/IEC 18050:2006 ISO/IEC 13818-7:2006 ISO/IEC 14496-17:2006 ISO/IEC 21000-4:2006 ISO/IEC 21000-10:2006 ISO/IEC 23001-1:2006
Information technology
Standards withdrawn
Period from 01 June to 30 June 2011
TC 69
ISO/TR 7871:1997