Académique Documents
Professionnel Documents
Culture Documents
This document describes the procedure for the migration of site/sites from one BSC/s to another BSC/s.
File New Area Planned Area - Enter name of planned area. File Open Planned Area My Own Select the area created by you and open. View BSC Select Source BSC. View Cells Internal All. Select any one cell to be migrated and go to Edit Move Cells. In Move Cells window click Insert Source BSC window pops up; select cells to be migrated and press Apply. Select all cells and press Target BSC Select Target BSC. Click on Move. Check status shows removing cells, creating cells and copying relations. Wait for process to complete. When status shows Completed, check Report it should show No Errors Close the move cells window. In source BSC check all DELETED cells No other cells, except those to be migrated, should show DELETED. In target BSC cells show [NEW] status Change the LAC of every [NEW] cell, one by one, carefully. Cross check after completion Check Neighbors To mutual neighbor relations and CGI data in all NEW cells of target BSC. Now planned area is ready to Update.
In Target/New BSC/s Enable Output Logging/Delayed Response in Separate Area and give RXMOC: MO=RXOTRX______, CELL; Run RXMOC Script to attach TRX to TG and Cell. RXMOC: MO=RXOTX______, CELL; Run RXMOC Script to attach TX to TG and Cell. RXTCI: MO=RXOTG__, CELL__, CHGR__; Run RXTCI Script to attach TG to Cell/CHGR.
Again Run Planned Area. Deblock VC12 Ports, Devices and DIP/s. DTSTP: DIP=____; Check the status of DIP/s. Enable Output Logging and give RXESI: MO=RXOTG______, SUBORD; bring all TG and subords in service, check the loading result in delayed response area, if CF shows loaded, its ok, otherwise take the necessary action according to the status of CF. RXBLE: MO=RXOTG______, SUBORD; Deblock all TG and subords. Run the RLSTC cmd file/s for making active all the involved cells. Ask Drive Test Engineer for conducting Drive Test and share the results. Perform the following checks now RLSTP: CELL____; Check the status of all cells. RLCRP: CELL____; Check the operational status of all cells. MGCEP: BSC= ___; Check all the involved cells are defined in the target MSC. Check in C.N.A. Neighbors To for mutual neighbor relations should exist. Activate CBCH on all the involved cells. ALLIP; Delete all the involved TG / Subord in the OLS/Source BSC. Update the CR status. Get the clearance from N/W Surveillance Engineer on All Sites Up and No Active Alarms. Inform to all the concerned person thru mail using fixed distribution list.
At a glance: - Create MO in New BSC without RXMOC and RXTCI - Delete MO from Old BSC but not RXTCE - Run CNA, update will fail in new BSC - Run RXMOC (TX and TRX) and RXTCI in new BSC - Run the CNA again.