Académique Documents
Professionnel Documents
Culture Documents
Select one: Please select one of the choices inSelection: Down Box 7 the Drop Add Single BTS is for a Single BTS Add. Please note if the BTS's Mode is Simplex or Split. This form
Add Multiple BTS is Project BTS adds. Please do not use this for ordinary BTS requests only for Projects su This form / for Multiple
Add Single Cluster Carrier This form is for a Single/Cluster BTS Carrier Add. During the Maintenance Window the BTS will need to 5 Add Multiple CarrierforProject BTS Carrier Adds. Please do not use this for ordinary Carrier requests only for This form is / Multiple 6 CEM/XCEM Opto is for CEM/XCEM moves on existing BTS's only. This form 7 Add T1 to Single BTS T1 Additions or existing BTS's only. This form is for
8
s Simplex or Split.
Type of Request:
Notes:
enance Window the BTS will need to be deleted and cloned from another site that has new carrier configuration. ***Remember to add Neigh
RF Engineering Responsible Parameters Network Operations Responsible Parameters Network Engineering Responsible Parameters
Clone Change Clone BTS Mode BTS Name BTS System Number (Switch)
MetroC
This is source (clone) ADD or BTS for DELETE the New Site MC1900B TS####
Simplex or Split
ADD
MetroCell Common Parameter Configuration Module Type SID / Market ID NID / Switch Num BSC ID Band Class Number of GPSTMs Number of RFMs FRM Type Key Codes Required Type of Key Codes required for change. (ADD_MF RM_Carri er, EXT_Cov _MFRM, 1XEVDO_ Enabler, XCEM_C E_Enabler , eDCG_Ca p_Enabler , DUAL_DC G_Enable r)
DCG, eDCG
032767 If Logical or PilotBeac on, multiple SIDs are needed. The first Id being home SID
065535 If Logical or PilotBeac on, multiple NIDs are needed. The first Id being home NID
1,3,5,7 If Logical or PilotBeac on, multiple 1900 for BSC Ids PCS, 800 are for AMPS needed. The first Id being home BSC Id
16
19
Indicates what type of FRM is requested for change. (SRFM, MFRM, MFRM3)
eDCG
4622
51
1900
MFRM3
Sync Gain
Used for Set-point Procedure Call Handoff Min Pilot Paging Blocking Blocking to Total Gain Threshol Threshol Power d d Ratio
DPM Combiner
0 to 7
0255
0255
0255
11 db change is PeakPow Duplexor 0...419430 0...419430 -2550 er Turned or 3 3 off. Per Triplexor sector in Power MO
148
53
110
Number of T1's
Primary T1/E1
LAPS (CBRS)
T1/E1 Parameter Configuration BTS/ISSH Traffic O T1 SysNum PortNum Range name (CBRS) (CBRS) (CBRS) (CBRS)
1..60
1028_1
1028
10..127
891
n STS/* (CBRS) vt1dot5/*, IMH No. * (CBRS) (CBRS) Wzone (World Zone)
Frequency-Sector Parameter Configuration CDMA Frequenc Sector ID Pilot PN y RFM Number TxAtten Normal
0-2
1,1..7,4
1..210
BSC1=1, BSC2=3,
0511
Not used 1 to 9. with TPTL Indicates Turned CORE on. port Default = number. 192
1 1 1 1 1 1 4 5 6
arameter Configuration Cell ID Channel List Percent Number Carrier of CEMs Tx Power
CEM Parameter Configuration Number CDMA Slot of Spare Frequenc Number Channel CEM y Cards
BTS Number
May have multiple channels 1= for coList of 02047 CEM24 or Default = List of located channel Should be XCEM32, 1000, for slots per BTSs not cards per the same 2= Default = MFRM-h channel # using site # as CDMA CEM48 or false max = (max slots GSR. Up (max slots Channel XCEM64, 2817 = 12) to = 12) Number 4= 10:(0..204 XCEM192 7), eg 375,200
CCEM or XCEM
3 3 3 3 3 3 1 1 1
F F F F F F F F F
Other Important RF Parameters CEM Count Access Longitud Neighborl MCTAAL MCTRTH MCTAPRI Latitude Transmit Overload e ist G RSH O Class
Global Service
MCTA_En Needed Decimal abled, or for Carrier Format MCTA_Re Creation. tain_Load
Threshold at which MCTA pushes calls to other Priority of Carrier. Carriers 0 The lower being first the value priority the harder it is to push to other Carrier.
True or False
0 0 0 0 0 0 1 1 1
Global Service Redirection Return If Failed Record Type CDMA_C BAND_C Expected Expected HAN_LIS LASS SID NID T
True or False
Format Default = Default (1,0 = CDMASys 1_8_2_0 032767 065535 625) , (2, temRedire GHz 0=625, ction 1=575)