Académique Documents
Professionnel Documents
Culture Documents
Coverage* (2 Coats) Gloss/Sheen 3-12 units at 60 deg gloss head Durability** 7 years System Usage Asian Paints Exterior Wall Primer @100% dilution. 2 coat Apex Ultima application @35-40% dilution. 4-6 hrs between coats
Exterior cement 50 - 60 sq ft / plaster, false ltr ceilings, asbestos sheets, concrete, not to be applied on Mangalore tiles Exterior cement 50 - 60 sq ft / plaster, false ltr ceilings, asbestos sheets, concrete, not to be applied on Mangalore tiles
Soft Sheen
5 years
8-10 years
Apex Duracast Roughtex applied without dilution to get a 2-2.5 mm thick coat. Rub with trowel to get desired texture. Allow to dry overnight. Two top coats with Apex/Apex Ultima of desired shade at 40% dilution One coat of exterior Primer @ 100% dilution. One coat of Apex Duracast Finetex with honeycomb roller to get desired texture. Allow to dry overnight. Two top coats with Apex/Apex Ultima of desired shade at 40% dilution Apex Duracast Dholpur tex applied without dilution . Rub with trowel to get desired texture. Allow to dry overnight. Two top coats with Apex/Apex Ultima of desired shade at 40% dilution
Apex Duracast Exterior cement 15 sq feet/kg FineTex masonary plaster, Interior masonary surfaces
Matt Finish
5 - 7 years
Sand Faced Plasters, Concrete Apex Duracast brickwork etc. Dholpur Tex Can also applied on suitable surfaces in interiors Sand Faced Plasters, Concrete Apex Duracast brickwork etc. Swirltex Can also applied on suitable surfaces in interiors Asian Paints Apex Stretch Water Repellant Exterior Paint
2.5sq feet / kg
Matt Finish
5 - 7 years
3.54sq feet / kg
Matt Finish
5 - 7 years
Apex Duracast Roughtex applied without dilution to get a 2-2.5 mm thick coat. Rub with trowel to get desired texture. Allow to dry overnight. Two top coats with Apex/Apex Ultima of desired shade at 40% dilution Asian Paints Exterior Sealer @ 10% dilution 2 coat Apex stretch application @ 35-40% dilution. 6 hours between coats
Exterior cement 50 - 60 sq ft / plaster, false ltr ceilings, asbestos sheets, concrete, not to be applied on Mangalore tiles Exterior cement 50-60 sq ft / plaster, false ltr ceilings, asbestos sheets, concrete, not to be applied on Mangalore tiles
7 years
Asian Paints Ace Exterior Emulsion/Asian Paints Ace Supreme Exterior Emulsion# # for Mumbai Location only
Matt
3 years Asian Paints Exterior Sealer @ 10% dilution (non-coastal 2 coat ACE application @ 75% dilution. 4 markets) hours between coats
** Durability of the Paint is measured by its ability to resist fading,flaking, anti-algal performance and overall film integrity.
INTERIORS Faux Finishes Packshot Product Name Royale Play Special Effects Paint Substrate Coverage in sq ft/ltr (2 Coats) Gloss Sheen Durability System Usage
3 years
Asian Paints Decoprime ST/WT + Asian Paints Acrylic Putty + Asian Paints Decorpime ST/WT + Royale 40% dilution (2-3 coats)
Asian Paints Decoprime ST/WT + Asian Paints Acrylic Putty + Asian Paints Decorpime ST/WT+ Premium Emulsion 40% (2-3 Coats) Asian Paints Decoprime ST/WT + Asian Paints Acrylic Putty + Asian Paints Decorpime ST/WT+ Premium Emulsion 40% (2-3 Coats) Asian Paints Decoprime ST/WT + Asian Paints Acrylic Putty + Asian Paints Decorpime ST/WT + Royale 40% dilution (2-3 coats)
PPP, PE Royale 45-55 sq ft per tinted as base Play Safari lit coat Royale Play Metallics Royale Luxury Emulsion basecoat (chosen shade) PPP surface
5 years
Asian Paints Decoprime ST/WT + Asian Paints Acrylic Putty + Asian Paints Decorpime ST/WT
Regular Finishes Packshot Product Name Royale Glitter Substrate Coverage in sq ft/ltr (2 Coats) Gloss Sheen Smooth metallic finish Durability System Usage
Royale Glitter 110-125 can be applied on smooth plasters, false ceiling, asbestos sheets, concrete etc. It requires a base coat of Asian Paints Premium Emulsion White. Royale can 150-175 be applied on smooth plasters, false ceiling, asbestos sheets, concrete etc. PE can be 150-170 applied on smooth plasters, false ceiling, asbestos sheets, concrete etc. TE can be 140-150 applied on smooth plasters, false ceiling, asbestos sheets, concrete etc.
5-6 years
Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty, again apply Asian Paints Primer @ 8-10% dilution after 4-6 hrs of putty application. Apply Premium Emulsion White with 60-70% dilution to get a smooth uniform white surface.Then apply 2 coats of Royale @ 40-45% dilution with water. 3-4 hrs between 2 coats
Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty, again apply Asian Paints Primer @ 8-10% dilution after 4-6 hrs of putty application. Then apply 2 coats of Royale @ 4045% dilution with water. 3-4 hrs between 2 coats
Premium Emulsion
4-5 years
Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty, again apply Asian Paints Primer @ 8-10% dilution after 4-6 hrs of putty application. Then apply 2 coats of PE @ 60-70% dilution with water. 3-4 hrs between 2 coats
Tractor Emulsion
4-5 years
Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty, again apply Asian Paints Primer @ 8-10% dilution after 4-6 hrs of putty application. Then apply 2 coats of TE @ 50-75% dilution with water. 4 hrs between 2 coats
Interior Asian Paints 100-130 Wall Finish Matt can be - Matt applied on suitably prepared masonry walls Interior Asian Paints 110-150 Wall Finish Lustre can be - Lustre applied on suitably prepared masonry walls
Matt
3 years
Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty, again apply Asian Paints Primer @ 8-10% dilution after 4-6 hrs of putty application. Then apply 2 coats of Asian Paints Matt Finish @ 7-9% dilution with Mineral Turpentine. 8 hrs between 2 coats Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty, again apply Asian Paints Primer @ 8-10% dilution after 4-6 hrs of putty application. Then apply 2 coats of Asian Paints Lustre Finish @ 7-9% dilution with Mineral Turpentine. 8 hrs between 2 coats
ENAMELS Packshot Product Name Premium Semi Gloss Enamel Substrate Coverage in sq ft/ltr (2 Coats) Gloss Sheen Semi Gloss Durability in yrs 3 years System Usage
Premium 90-110 Semi Gloss Enamel can be applied on wood, metal surfaces and walls
Apply Asian Paints Primer @ 8-10% dilution with turpentine. Premium Semi Gloss Enamel can also be used as primer @100% dilution with water. After 6-8 hrs of drying, apply Asian Paints Wall Putty (for masonry or cement surfaces) or Asian Paints Knifing Paste Filler (for wood or metal surfaces). Again apply Asian Paints Primer @ 8-10% dilution with turpentine or Premium Semi Gloss Enamel @ 100% dilution with water after 4-6 hrs of putty application (6-8 hrs in case Knifing Paste Filler is used). Then apply 2 coats of Premium Semi Gloss Enamel @ 15-25% dilution with water. 4-6 hrs between 2 coats Apply Asian Paints Primer @ 8-10% dilution with turpentine. After 6-8 hrs of drying, apply Asian Paints Wall Putty (for masonry or cement surfaces) or Asian Paints Knifing Paste Filler (for wood or metal surfaces). Again apply Asian Paints Primer @ 8-10% dilution after 4-6 hrs of putty application (6-8 hrs in case Knifing Paste Filler is used). Then apply 2 coats of Premium Satin Enamel @ 15-20% dilution with turpentine. 6-8 hrs between 2 coats Apply Asian Paints Primer @ 8-10% dilution with turpentine. After 6-8 hrs of drying, apply Asian Paints Wall Putty (for masonry or cement surfaces) or Asian Paints Knifing Paste Filler (for wood or metal surfaces). Again apply Asian Paints Primer @ 8-10% dilution with turpentine o. Then apply 2 coats of Premium Gloss Enamel @10% dilution with turpentine. Leave 6-8 hours gap between the two coats. Sand the surface with Emery paper 180 and wipe clean. Apply asian paints primer @ 8-10 dilution with turpentine. After 6-8 hrs drying apply asian paints wall putty after 6-8 hrs drying sand the saruface with Emery paper 180 and Wipe clean. Again apply asian paints primer. Then apply 2 coat of Utsav Enamel @8-10% dilution with terpentine. Recoating period is 6-8 hrs.
Premium 100-120 Satin Enamel can be applied on wood, metal surfaces and walls
Low Gloss
3 years
Premium Gloss Enamel can be applied on 100 wood, metal surfaces and walls Utsav Enamel 75-95 is recommended for usage on interior surfaces. It can be applied on wooden surfaces (like doors, windows, furniture, cabinets) and also on metal surfaces like grills, furniture, and on suitably prepared masonry wall surfaces
Glossy
Utsav Enamel
Glossy
2 years
ECONOMY RANGE PRODUCTS: UTSAV RANGE Packshot Product Name Utsav Acrylic Distemper Substrate Coverage in sq mtr/ltr (2 Coats) Gloss Sheen Durability System Usage Sand the surface with Emery paper 100 and wipe clean. Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty after 6-8 hrs drying sand the surface with Emery paper 180 and wipe clean. again apply Asian Paints Primer. Then apply 2 coats of UAD @ 65-75% dilution with water. Recoating period is 3-4 hrs Sand the surface with Emery paper 180 and wipe clean. Apply asian paints primer @ 8-10 dilution with turpentine. After 6-8 hrs drying apply asian paints wall putty after 6-8 hrs drying sand the saruface with Emery paper 180 and Wipe clean. Again apply asi
Utsav Acrylilc Distemper 2 coats 7-8 can be applied on various types of plasters, false ceiling, asbestos sheets, concrete etc. Designed for interiors
Utsav Enamel
Utsav Enamel is 2 coats 7-9 recommended for usage on interior surfaces. It can be applied on wooden surfaces (like doors, windows, furniture, cabinets) and also on metal surfaces like grills, furniture, and on suitably prepared masonry wall surfaces Utsav Distemper should be used only on interior surfaces. It can be applied on suitably prepared masonry wall surfaces Asian paints Utsav Flooring colour can be used to impart colour to cement surfaces 2 coats 6-7
Glossy
2 years
Utsav Distemper
Sand the Surface with Emery paper 100 and wipe clean than apply 2 coats of Utsav Distemper @ 75% dilution with water. Recoating period is 4-6 hrs
N/A
N/A
10 years
Add 1 kg of Utsav Floor Colour to 6-8 kg of cement. Add suitable quantity of water to make a homogeneous free flowing paste. Clean and moisten the surface to be coated. Sprinkle dry cement on the moist surface. Allow it to set in for at least 1 hr. Apply the paste as a Apply Asian Paints Utsav Metal Primer Red Oxide @ 4-5% dilution with turpentine. After 6-8 hrs for drying, apply AKPF (optional) allow it to dry for 4-6 hrs. Sand lightly with Emery paper 180 and wipe clean. Apply 2nd of Utsav Metal Primer Red Oxide on ar Sand the surface with Emery paper 180 and wipe clean. Apply asian paints Utsav primer WT @ 100% dilution with water. After 4-6 hrs drying apply asian paints wall putty after 6-8 hrs drying sand lightly with Emery paper 180 and Wipe clean. Again apply asia Sand the surface with Emery paper 180 and wipe clean. Apply asian paints Utsav primer ST @ 8-10 dilution with turpentine. After 6-8 hrs drying apply asian paints wall putty after 6-8 hrs drying sand the sarface with Emery paper 180 and Wipe clean. Again apply asian paints Utsav primer ST.
Utsav Metal primer - Red oxide is suitable for priming ferrous metal substrates
1 coat 14-16
Matt
5-6 years
Asian paints Utsav Primer 1 coat 20-25 WT is suitable for priming plastered walls, asbestors, cement and concrete etc.
Matt
4-5 years
Asian paints utsva primer 1 coat 18-20 ST should be used only on interior surfaces. It can be applied on suitably prepared masonry and wall surfaces, as well as wooden surfaces like doors, window, furniture, cabinets etc.
Sheen
4-5 years
DISTEMPERS Packshot Product Name Substrate Coverage in sq ft/ltr (2 Coats) Gloss Sheen Durability System Usage
TAD can be applied on smooth plasters, false 85-90 ceiling, asbestos sheets, concrete etc. Tractor Synthetic Distemper can be applied on various types of plasters, false ceiling, asbestos sheets, concrete etc. Designed for interiors 85-118
3 Yrs
Sand the surface with Emery paper 100 and wipe clean. Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty after 6-8 hrs drying sand the surface with Emery paper and Apply Asian Paints Primer @ 8-10% 3-4 Hrs between 2 Coats Sand the surface with Emery paper 180 and wipe clean. Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty. after 4-6 hrs drying sand the surface with Emery paper 180 and wipe clean. again apply Asian Paints Primer. Then apply 2 coats of TSD @ 50-60% dilution with water. Recoating period is 6 hrs
3-4 years
Utsav Acrylilc 75-85 Distemper can be applied on various types of plasters, false ceiling, asbestos sheets, concrete etc. Designed for interiors Utsav Distemper should be used only on interior surfaces. It can be applied on suitably prepared masonry wall surfaces 60-75
3 years
Sand the surface with Emery paper 100 and wipe clean. Apply Asian Paints Primer @ 8-10% dilution with water or turpentine (depends on primer used). After 6-8 hrs for drying, apply Asian Paints Wall Putty. after 6-8 hrs drying sand the surface with Emery paper 180 and wipe clean. again apply Asian Paints Primer. Then apply 2 coats of UAD @ 65-75% dilution with water. Recoating period is 3-4 hrs
Utsav Distemper
2 years
Sand the Surface with Emery paper 100 and wipe clean than apply 2 coats of Utsav Distemper @ 75% dilution with water. Recoating period is 4-6 hrs