Académique Documents
Professionnel Documents
Culture Documents
DIMENSIONAL INFORMATION
71.38 (1813) 20.75 (527) 7.94 (201) 15.39 (391) 5.44 (138) 5.34 (136)
2.50 (64) 25.12 (612) 15.13 (384) 6.00 (152) 6.73 (171) 32.95 (837) 60.00 (1524) 4.00 (101) 3.87 (98)
33.27 (845)
24.50 (622)
Planetary Gearing for highly efficient operation. Sliding drum clutch with negative draft jaws for positive engagement. Rugged and compact design. Multi-disc wet brake to hold load firm even with a hydraulic line brakes. Patented BRADEN Brake Valve for smooth and reliable load control.
PRINTED IN U.S.A.
PERFORMANCE INFORMATION
LAYER
LAYER 3
47 14.3 103 31.4 168 51.2 243 74.1 328 100.0 0.0 42 12.8 94 28.7 155 47.2 225 68.6 0 0.0 38 11.6 86 26.2 142 43.3 209 63.7 0
!
High Speed ROPE CAPACITY 20.00 in. Drum LINE PULL LINE SPEED
(lbs) (kg) 25,270 20,316 16,998 14,589 (fpm) (mpm) 14.3 17.4 20.7 23.8 (ft) (m) 12.8 28.7 47.3 68.6
WARNING
CAUTION
1 2 3 4
21 26 31 36
47 57 68 78
42 94 155 225
The products described herein are neither designed nor intended for use or application to equipment used in lifting or moving of persons.
ENGINEERING DATA
Rated Working Load (First Layer)125,000 lbs. (56,700 kg) Gear Ratio. 156:1 Oil Capacity ..22.5 pints Weight - (with 2-speed motor)1800 lbs. (816 kg)
!
COMMITMENT
Every process in the design, manufacture and support of BRADEN products is focused on one goal: Providing the highest quality winch, hoist and drive systems in the world. PACCAR Winch Division is committed to providing the best in product design, durability and reliability. BRADEN products are supported with comprehensive publications, factory service representatives and a world wide distribution network. Since 1905 PACCAR Inc has provided high quality products and services to numerous markets and countries. Let us put our experience and expertise to work for you.
WARNING
CAUTION
A minimun of 5 wraps of wire rope must be left on the drum to prevent the load from being supported by the wire rope anchor alone. Since the wire rope anchor is not designed to hold the rated load, failure to leave 5 wraps of wire rope on the drum could cause the load to drop, which could result in property damage, personal injury or death.
BRAKE VALVE
A 12V DC
T G P2
NOTES
Specifications are subject to change without notification and without incurring obligation. Pressure and flow shown are the maximum allowable for the particular combination of winch, ratio, motor and drum. Specifications in this publication are theoritical and may vary depending on hydraulic system, environment, etc. Line pulls are maximum ratings for the winch only. Wire rope ratings may be lower than the the winch rating. Consult the wire rope manufacturer for ratings.
PUMP
WINCH BRAKE
LOWER
(lpm) 32.2
HP125