Académique Documents
Professionnel Documents
Culture Documents
0 Feature Test Cases for PURCHASING 2G/3G INTERGRATED BTS FOR MOBIFONE CENTER I,V NETWORK 2010 Project
Website:
http://support.huawei.com
E-MAIL:
support@huawei.com
Address:
Bantian, Longgang District, Shenzhen, P. R. China
Postal Code:
518129
1. UE initiates PS Dial-up.
Remark 1. Before the verification, backup the configuration. 2. Related protocol specifications are as follow: 3. 3GPP TS 25.211: Physical channels and mapping of transport channels onto physical channels (FDD) 3GPP TS 25.306: UE Radio Access capabilities 3GPP TS 25.321: Medium Access Control (MAC) protocol specification 3GPP TS 25.331: Radio Resource Control (RRC) Protocol Specification Related Huawei feature specifications are as follow: WRFD-01061002 UE Category 1 to 18 4. Related Huawei feature specifications are as follow: WRFD-010683 Downlink 64QAM Radio Bearers Parameter Description 5. Operation Guide (1). Check the HSUPA and HSDPA function of cell is active through the MML command: DSP UCELL. (2). Check Cell_DCH DL L2 enhance max PDU size is the default value 502 through the MML command: LST UFRC. (3). Check "DL BE traffic threshold on HSDPA" and "UL BE traffic threshold on HSUPA" are all default value on RNC1 through the MML command: LST UFRCCHLTYPEPARA. (4). Check the allocation mode of HS-PDSCH code to automatic on NodeB1 through the MML command: LST MACHSPARA. (5). Check "Preferred MIMO or 64QAM character" is "None" or "64QAM" on RNC through the MML command: LST UFRC. (6). Observe RLC Layer throughput on RNC1 as follow: ->Monitor ->UMTS Monitoring ->Connection Performance Monitoring ->DL Throughput Bandwidth (7). Check UE supports 64QAM function through the "hsdsch-physical-layer-category-ext" IE in the RRC_RRC_CONNECT_SETUP_CMP message. (8). In lab tests, the average downlink bit rate of 64QAM CAT14 service normally can reach about 18.5Mbps. 6. After the verification, restore the configuration. Caution 1. Check RNC license "HSPA + Downlink 21 Mbps Per User" is "ON" on RNC1 through the MML command: DSP LICENSE. 2. Local Cell Number Support DL 64QAM" on NodeB through the MML command: DSP LICENSE. Additional Remark 1. Please check the following counters with the test case: VS.HSDPA.RAB.64QAM.AttEstab VS.HSDPA.RAB.64QAM.SuccEstab VS.HSDPA.RAB.AbnormRel.64QAM VS.HSDPA.RAB.NormRel.64QAM VS.HSDPA.64QAM.UE.Mean.Cell VS.HSDPA.UE.Max.CAT13.14 VS.HSDPA.UE.Mean.CAT13.14