Académique Documents
Professionnel Documents
Culture Documents
Introduction
Solar energy is the most readily available source of energy. It is free. It is also the most important of the non-conventional sources of energy because it is non-polluting.
The main goal of this project is to develop and implement a prototype of two-axis solar tracking system based on a PIC Microcontroller
Sun Path
Due to rotation of earth the solar panels cant maintain their position always in front of sun. This problem results in decrease of their efficiency. Thus to get a constant output, we are implementing an automated system which should be capable to constantly rotate the solar panel.
are Light dependent resistor (LDR), LM 358 window comparator, TA7291PICs, BP139, TIP32, TIP31 ICs, and PIC16F84A microcontroller.
Sensors
Light dependent resistors (LDR) are used in the two-axis solar tracking system for detecting the panel position. Two sensors (East/West) are used in the altitude motion of the reflector and two sensors (Left/Right) are used in the azimuth motion of the reflector.
connected to the outputs of two LDR sensors (East/ West) and two LDR sensors (Right/ Left sensor). The third LM358 is used as a comparator and this comparator is used the start of the two axis solar tracking system. RA0, RA1, RA2 and RA3 are the outputs of the 16F84A and these outputs are connected to Pin 5 and Pin 6 of two TA7291Ps.In this project, two TA7291P ICs are used for driving the DC motor.
12V dc power supply didn't really provide enough torque for the gear box motor to run smoothly. Darlington pair circuits are replaced between TA7291P IC and DC motor and are used for power amplifier.
Thank You