Académique Documents
Professionnel Documents
Culture Documents
1.1
___________________
___________________________________ _
3. In OMSN there are specific slots for tributary cards and other specific slots for aggregate cards.
True False
1.2
1. Are the intermediate OMSN able to switch ATM traffic? Yes, always Yes, if ATM card is equipped No
2. Does an intermediate OMSN require the ATM card to pass-through a VC containing ATM traffic? Yes No
1.3
1.4
1. What are the main functionalities of EC? ____________________________________________ ____________________________________________ ____________________________________________ ____________________ 2. What are the main functionalities of the SC? ____________________________________________ ____________________________________________ ____________________________________________ ____________________ 3. ISSB Intra-shelf Serial Bus connects EC and SC. True False 4. If EC is faulty, traffic is affected. True False
1.5
1. Can Access card be used as stand alone unit? Yes No 2. Is there a relation between the Access card slot and Port card slot? Yes No 3. Are there reserved slots in the equipment? Yes No
1.6
1. Can any PDH signal be connected with any STM-N signal? Yes No
2. Is SDH matrix able to cross-connect all of the ports of the equipment? Yes No 3. ATM matrix must be used in conjunction with _____ matrix.
1.7
1. Is it necessary to equip A2S1 Access card for P4S1N Port card? Yes No Why? ____________________________________ 2. P63E1N must be used in conjunction with up to ____ Access cards whose acronym is_________.
3. STM-1 signal may be handled by means of: P4S1N + _______ ______ + A2S1 ______ + _______
4. T3 is the name of the ____Mbit/s signal 5. STM-4 signals are handled by an Access card and a Port card. True False 6. HS Port cards can be equipped in every not reserved slot of the Basic Area. True False
1.8
1. What is the card that implements SC, matrix and synchronization circuits? ______________________________________ 2. How many SC can the equipment have? ______________________________________ 3. F interface connector and Flash card are hosted by the card that implements EC. True False 4. Is the EC protected? ______________________________________
1.9
1.10
Configure the 1650SM-C using the labels below. Attention should be payed on the relation between the Port card and the Access card
10
1.11
Configure the 1650SM-C with the boards necessary for the services. Use EPS protection when possible
E1 Port1
E1 Port2
Electrical Stm1
Service phone
1.12
Write the three simplified Cross-Connection Tables for transporting the STM-1 between extreme 1650SMC, SNCP-N protected
STM-4 Ring
STM-1 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
STM-1
1.13
Draw the best solution for transporting the unidirectional 34Mbps between E and B NEs What type of cross-connections are used in each NE? Define 1650SMC D Node Boards Configuration What type of cross-connections will appear if the E3 circuit is bidirectional?
B STM-4 Ring E3
STM-4 Ring E3 E F
1.14
1.15
1.16
1.17
1.18