Académique Documents
Professionnel Documents
Culture Documents
www.huawei.com
Objectives
Know the principle of data configuration Master how to perform DBS3900 initial data configuration Master how to perform DBS3900 data reconfiguration
Page1
Contents
1. BSC6000 Data Configuration Principle 2. DBS3900 Initial Data Configuration 3. DBS3900 Data Reconfiguration
Page2
The data configuration function of the BSC6000 includes the configuration, browsing, storage, backup, and restoration of the
The data configuration is performed on the LMT. The configuration data can be saved as binary DAT files.
LMT
BSC
BTS
Page3
The "offline" mode refers to that the communication between an LMT and a GBAM/GOMU is not set up.
User can configure the data in offline mode, and load the data when later the LMT is connected to BSC successfully. So offline mode can be adopted during initial operation and upgrade of a network in a fast and convenient manner.
Page4
The "online" mode refers to that the communication between an LMT and a GBAM/GOMU is normal, and every step of the operation takes effect in real time.
After logging in to GBAM/GOMU by LMT software, user can dynamically adjust data such as adding, deleting, or modifying data.
Page5
Page6
Contents
1. BSC6000 Data Configuration Principle 2. DBS3900 Initial Data Configuration 3. DBS3900 Data Reconfiguration
Page7
Contents
2. DBS3900 Initial Data Configuration
2.1 Add Site 2.2 Add Cell 2.3 Configure Site Attributes 2.4 Configure Cell Attributes
Page8
Login to LMT
Page9
Page10
Add Site
Add site to GEIUB idle portRight click the GEIUB board Add cascaded site to a existing siteRight click the existing site in navigation tree
Page11
Add Site
Page12
Add Site
Page13
the maximum
In 3:1 mode, one E1 supports 14TRX In 2:1 mode, one E1 supports 12TRX In 1:1 mode, one E1 support 10TRX.
Page14
Page15
Contents
2. DBS3900 Initial Data Configuration
2.1 Add Site 2.2 Add Cell 2.3 Configure Site Attributes 2.4 Configure Cell Attributes
Page16
Add Cell
Page17
Add Cell
Parameter
Cell Index
Default Value
02047
Description
A unique number that identifies the cell
Cell Name
NULL
For one cell, the cell name is defined by LMT user. For several cells, the cell names are the combination of the defined name and the suffix number.
The five frequency bands in the cell are GSM900, DCS1800, GSM900&DCS1800, GSM850, and PCS1900. Name of the PCU that controls the cell. No PCU indicates that the cell is not controlled by PCU. Number of cells to be added Suffix of the cell name
Frequency Band
GSM900
PCU Name
No PCU
1 0
Page18
Contents
2. DBS3900 Initial Data Configuration
2.1 Add Site 2.2 Add Cell 2.3 Configure Site Attributes 2.4 Configure Cell Attributes
Page19
Page20
Page21
Page22
Page23
If Double Antenna Four Receiver is adopted, the parameter Associated DRRU Board No. must be configured
Page24
Allocate the TRXs to cell and finish configure site attributes process
Page25
Contents
2. DBS3900 Initial Data Configuration
2.1 Add Site 2.2 Add Cell 2.3 Configure Site Attributes 2.4 Configure Cell Attributes
Page26
Configure cells
Page27
Page28
mandatory
Page29
Configure ARFCN
Page30
Page31
Power level: 0~10 When this parameter is set to 0, the transmit power level of the TRX is the greatest. When this value is added by 1, the
Page32
Page33
Receive mode
Main diversity
Send mode
combining
Page34
Page35
Configuring cell advanced attributes including Idle Mode, Call Control, Handover Data, Power Control, Channel Management
Page36
Page37
The newly-added site is displayed on topology tree, after being clicked, the
Page38
Contents
1. BSC6000 Data Configuration Principle 2. DBS3900 Initial Data Configuration 3. DBS3900 Data Reconfiguration
Page39
Data Reconfiguration
Data Reconfiguration means after initial data configuration, we can modify or add or delete existing data.
You may reconfigure the data of BSC system for following reasons:
Page40
Add Cell
Page41
We can right click the existing cell and select corresponding items. Operation details are the same as those of the initial configuration.
Page42
Add TRX
Page43
Add TRX
Page44
Add TRX
Page45
Add TRX
Configure the TRX attributes and allocate the ARFCN to the TRX.
Page46
Right click the existing TRX and select corresponding items. The parameters to be configured are the same as those of the initial
configuration.
Page47
Summary
BSC6000 data configuration principle Initial data configuration steps of DBS3900 Data reconfiguration of DBS3900
Page48
Thank you
www.huawei.com