Académique Documents
Professionnel Documents
Culture Documents
AIM
Acquiring fundamental knowledge. Understanding science. Analyzing issues. Sharing hands-on experience. Discovering.
OBJECTIVES
Reduce development time. Improve your ability. Find creative solutions. Meet your everyday challenges faster by wisely. Accelerate your own projects by getting feedbacks.
Shelter Waterproofing
Sikaflex: Polyurethane
TOOLS
Rivet
Riveter
Tool Box
Drill Bits Drill Machine
Plastic Sheets
Sikaflex
Scrapers Silicon
Gloves
If the roof floor condition is good for water proof and has enough strength to bear the shelter.
ADDITIONAL ROOF: Additional roof sheets maybe provided. The additional roof will consist of roof sheets and galvanized steel angle structures. ADDITIONAL BEAM (Optional ): Inclination for Water Draining
S.No 1 2 3
Rivet
4.8 mm x 16.5 mm
Diameter Length
SIKAFLEX USAGE
Method of Application:
Surface preparation; Surfaces must be clean, dry and free from all traces of grease, oil and dust.
Joint depth
10 mm 12-15 mm
17 mm
20 mm
25 mm
~ 3 m ~ 1.5 m
Arrange
3-4 pieces of polythine (plastic) Sheets, Sika Flex, Scraper, knife, wiper, Rivets, Riveter, Drill machine and rags (cloths). Spread over these sheets on M/Waves, Rectifiers and BSC/BTS Cabinets. Then put the water between shelter roof and top most sheet of the roof. Take snaps. Observe inner side of the shelter near about half an hour. If water leakage in the shelter roof, then takes the following actions, otherwise remove the water from the roof with the help of wiper and remove the plastic sheets from the equipments.
Thank You
16