Académique Documents
Professionnel Documents
Culture Documents
Unsafe Acts
Unsafe Conditions
Discover causes of accidents Reactive Methods 1)Accident Investigation 2)Accident Analysis Proactive methods 1)Job Safety Analysis 2)Plant Safety Inspection 3)safety Survey 4)Safety Audit 5)FMEA 6)HAZOP 7)HAZEN 8)FTA 9)MORT
CONSULTING ENGINEERS LIMITED
ACCIDENT INVESTIGATION
We shall have a complete session on this topic hence we will not discuss the same here.
No. of accidents
40 35 30 25 20 15 10 5 0
No. of accidents
Age groups
-6 0 ab ov e6 0
20
0 -5 46 51
-2
-3
-3
-4
-4
21
26
31
36
41
-5
U pt
56
Accident Analysis as per the body part injured Head - 21 Neck- 3 Right Palm-5 Right finger-8 Wrist -5 Left Thigh- 5 Right Thigh- 2 Right Leg - 9 Right Foot - 6
CONSULTING ENGINEERS LIMITED
Face - 8
Back - 10
Left leg 15
Left foot - 3
Falling Bodies Person Falling Manual Material handling Repairing and adjusting machine Machine accidents Vehicle accidents Striking against objects Electrocution Person slipping but not falling Hand Tools Mechanical material handling Housekeeping Unguarded machinery Miscellaneous
We shall have a complete session on this topic hence we will not discuss the same here.
PLANT INSPECTION
CONSULTING ENGINEERS LIMITED
This is not in our hand but next slides are in our hands: CONSULTING ENGINEERS LIMITED
Unsuitably dressed
CONSULTING ENGINEERS LIMITED
Floor opening
CONSULTING ENGINEERS LIMITED
UNGUARDED
CONSULTING ENGINEERS LIMITED
INADEQUATELY GUARDED
CONSULTING ENGINEERS LIMITED
Ladder safety totally absent-No flat rungs, no proper footing, tying by ordinary sutali at one end only, no extra length of ladder provided after the landing. - Provide total ladder safety.
Protruding objects
CONSULTING ENGINEERS LIMITED
Inadequate Illumination
Elimination of unsafe condition: Use of five Es, namely 1)Elimination 2)Engineering revision 3)Enclosing the machine 4)Enclosing the man 5)Education
CONSULTING ENGINEERS LIMITED
SUPERVISION AND ITS EFFECTIVENESS TRAINING ETC. CORRECTION OF ROOT CAUSES WOULD EFFECT PERMANENT RESULTS
# DIRECTION OF SAFETY EFFORT BY SETTING GOALS AND BY PLANNING ORGANISING AND CONTROLLING TO ACHIEVE THEM
an unsafe act, an un safe condition and an accident are all symptoms of Something wrong in the management System Identify what is wrong that allows an Unsafe act to be performed and an Unsafe condition to exit contd.
CONSULTING ENGINEERS LIMITED
Safety should be managed like any other company function The key to effective line safety performance Is management procedure that fixes accountability
Function of safety is to locate and define operational errors that allowed accidents to occur
CONSULTING ENGINEERS LIMITED