Académique Documents
Professionnel Documents
Culture Documents
TOPIC OUTCOMES
It is expected that students will be able to:
Explain
the principle and mechanisms of heat transfer. units involving heat transfer.
Utilize
CONTENTS
Units
and Dimensions Energy and Heat Units Conservation of Energy and Heat Balances Introduction and Mechanisms of Heat Transfer
are: properties that can be measured such as length, time, mass, temperature properties that can be calculated by multiplying or dividing other dimensions, such as velocity (length/time)
Units
are means of expressing the dimensions such as feet or meter for length, hours/seconds for time.
valid equation must be dimensionally homogeneous: that is, all additive terms on both sides of the equation must have the same unit
Every
CONVERSION OF UNIT
A
measured quantity can be expressed in terms of any units having the appropriate dimension convert a quantity expressed in terms of one unit to equivalent in terms of another unit, multiply the given quantity by the conversion factor factor a ratio of equivalent values of a quantity expressed in different units
To
Conversion
SYSTEM OF UNITS
SYSTEM OF UNITS
Components of a system of units: Base units - units for the dimensions of mass, length, time, temperature, electrical current, and light intensity. Multiple units- multiple or fractions of base unit e.g. time can be hours, millisecond, year, etc. Derived units - units that are obtained in one or two ways: by multiplying and dividing base units; also referred to as compound units e.g. ft/min (velocity), cm2(area), kg.m/s2 (force)
UNIT
Base Unit
Quantity Temperature Time Mole Mass Length SI Kelvin Second Gram mole Kilogram meter K s mole kg m American Rankine Second pound mole Pound mass feet R s lbmole lbm ft CGS Kelvin Second Gram mole Gram Centimeter K s mole g cm
Multiple Unit
Multiple Unit Preferences tera (T) 1012 109 106 103 centi (c) 10-2 10-3 10-6 10-9
UNIT
Derivatives SI unit
Derived SI Units Quantity Volume Force Pressure Energy/ Work Power Unit Liter Newton (SI) Dyne (CGS) Pascal Joule Calorie Watt Symbol L N Pa J cal W Equivalent to the Based Unit 0.001 m3 = 1000 cm3 1 kg.m/s2 1 g.cm/s2 1 N/m2 1 N.m = 1 kg.m2/s2 4.184 J = 4.184 kg.m2/s2 1 J/s = 1 kg.m2/s3
is proportional to product of mass and acceleration Usually defined using derived units : 1 Newton (N) = 1 kg .m/s2 1 dyne = 1 g .cm/s2 1 Ibf = 32.174 Ibm .ft/s2
Weight
of an object is force exerted on the object by gravitational attraction of the earth i.e. force of gravity, g. of gravitational acceleration: g = 9.8066 m/s2 = 980.66 cm/s2 = 32.174 ft/s
Value
TRY THIS
An
engineer who is working on the heat transfer analysis of a brick building in English units needs the thermal conductivity of brick. But the only value he can find from his handbooks is 0.72 W/m.oC, which is in SI units. To make matters worse, the engineer does not have a direct conversion factor between the two unit systems for thermal conductivity. Can you help him out? From your conversion table, you find that 1 W = 3.41214 Btu/h 1 m = 3.2808 ft 1oC = 1.8oF
form of energy that is transferred across the boundary of a system at a given temperature to another system at lower temperature. Heat the energy required to raise the temperature of a substance by one degree.
Specific
HEAT CONT
Definition of: Latent Heat - energy required to change the phase of a
substance (solid to liquid: ???, liquid to gas: ???)
Sensible
Heat
heat required to change the temperature of a substance the heat given to a body, when the body is in such a state that the heat gained by it doesn't convert to latent heat, or the energy supplied is not used up to change the state of the system In thermodynamics, they are called thermal energy.
Thermal
transfer is thermal energy transport due to a temperature difference. Thermal energy is associated with the translation, rotation, vibration and electronic states of the atoms and molecules that comprise the materials. It represents the cumulative effect of microscopic activities and is directly linked to the temperature of matter. Heat transfer occur because of a temperature difference driving force and heat flows from the high to the low temperature region. 3 mechanism of heat transfer are; i) Conduction ii) Convection iii) Radiation
The general balance for heat transfer: (Rate of heat in) + (Rate of generation of heat) = (Rate of heat out) + (Rate of accumulation of heat)
If we assume steady-state heat transfer, no heat generation. rate of accumulation is zero. rate of heat input = rate of heat output. rate of heat transfer is then constant with time. temperature at various points in the system do not change with time. rate of a transfer process is equal to driving force over resistance Rate of = Driving Force
Transfer
Resistance (R)
Conduction: the transfer of heat from a solid to another solid touching each other. Convection: the transfer of heat by circulation or movement through liquid or gases. Radiation: the transfer of heat from an object traveling through a space until absorbed by another object.
CONDUCTION
In
conduction, heat is transfer between the adjacent molecules because of the difference in their thermal energy. The hotter molecules have a greater energy and they give or impart an energy to the adjacent molecules which have lower energy levels. e.g.: when we heat one side of a metal plate, the other side will also become hot. This is because heat is transfer in that metal plate by conduction. Energy can also be transferred by free electrons, which is quite important in metallic solids.
EXERCISE 1
One
face of a copper plate 3 cm thick is maintained at 400oC, and the other face is maintained at 100oC. How much heat is transferred through the plate per unit area if k(copper) = 370 W/m.oC?
Answer:
3.7 MW/m2
q A Tw Tf h
: heat transfer rate (W) : area (m2) : temperature of solid surface (K) : average temperature of bulk fluid flowing to the solid : convective heat transfer coefficient (SI: W/m2. K; Eng.: btu/h. ft2. F)
2 types of convection: Natural Convection - motion of the fluid arises solely due to the temperature differences existing within the fluid. Example: hot air rising off the surface of a radiator. Forced Convection - motion of the fluid is imposed externally (such as by a pump or fan). Example: a fan-powered heater, where a fan blows cool air past a heating element, heating the air.
Tf q
q hA Tw T f
Tf 1 hA
Tf R
EXERCISE 2
Air
at 20oC blows over a hot plate 50 by 75 cm maintained at 250oC. The convection heat transfer coefficient is 25 W/m2.oC. Calculate the heat transfer.
Answer:
2.156 kW
A1 : area of object (m2) T1 : temperature of object (K) T2 : temperature of surrounding/enclosure (K) : emissivity (dimensionless) : Boltzmann constant (5.676 x 10-8 W/m2. K4 or 0.1714 x 10-8 btu/h. ft2. R4)
EXERCISE 3
Two infinite black 300oC exchange
plates at 800oC and heat by radiation. Calculate the heat transfer per unit area. (for black body, = 1)
Answer:
69.03 kW/m2