Video : MPEG4 Capture & Playback (@15fps), H.263, 3GP, Video Streaming & Progressive Download
Music: MP3/ACC+ Enhanced Digital Music Player (Ringtones & Music)
Memory: 15MB User internal memory, External MicroSD up to 2GB
Key Features & Enablers Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Key Features & Enablers Software: Branded Services, SCREEN3
Imager : 1.3MPixel, 8x Digital Zoom, Fixed Focus
Connectivity: Mini-USB, Bluetooth Class 2, USB 1.1, PC Synch, Motosync, Mobile Phone Tools, OTA sync
Browser: WAP2.0, MIDP2.0 Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Design Overview Vol Up/Down 1.3MP Camera CLI display Earpiece Smart Key MAIN display Navi & Keypad VR Key USB Connector Cover Speaker Battery Cover RF Grommet Front Hsg Cap Mic Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Accessories Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly Procedures Main Housing
Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly Battery Cover & Battery - Push the Battery Cover in the direction shown 1. 2. - Push inwards at the battery slot area & lift up the Battery completely.
Battery Slot Battery Cover Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly SIM Card & Front Housing Cap - Using the disassembly tool, slides it along the Front Housing Cap to release the catches. 3. 4. - Slide out the SIM card in the direction shown. Front Housing Cap SIM Card Disassembly Tool catches Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 - Using the T5 screw driver, unscrew the 6pcs of housing screws. (Torque force : 1.4 +/- 0.1 lbf-in)
5. 6. Disassembly Housing Screws 6 x T5 screws Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 -Lift up the Rear Housing & separate it from the Front Housing. 7. 8. - Remove the Connector Grommet.
Disassembly Rear Housing & Connector Grommet Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 - Remove the B2B Connector using the disassembly tool.
9. 10. - Lift up the Main Board from the Front Housing.
Disassembly B2B Connector & Main Board B2B Connector Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly Keypad & Cap Lock - With the Flip opened, push out the Keypad from the Front Housing.
11. 12. - Using a tweezer, remove the Cap Lock from the Front Housing.
Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembled Parts Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly Procedures Flip
Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly Left & Right Knuckle Cap - Insert the tweezer into the slot for the Right Knuckle Cap. - Push outwards.
1. 2. - Insert the tweezer into the slot (above the Flex Cable) for Left Knuckle Cap. - Carefully pushing it outwards.
Right Knuckle (Lanyard) Left Knuckle
Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly Hinge & Flip/Front Housing - While the Hinge is still being depressed, separate the Front Housing from the Hinge.
3. 3a. - Open up the Flip. - Using the plastic tool, push the Hinge inwards.
Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly Flip/Front Housing & Screw Bumper - Remove the Screw Bumper (4pcs) on the Rear Flip Housing using a tweezer.
3b. 4 . - Carefully separate the Front Housing from the Flip Assy by pushing the Flex Cable outwards. - Ensure that the Flex Cable is not damaged.
Flex Cable Screw Bumper Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly Flip Housing Screws & Flip Top - Insert the disassembly tool into the slot area. - Move along the Flip Housing to release the catches.
5. 6. - Using the T5 screw driver, unscrew the 4 Flip screws.
4 x T5 Screws (Torque force : 1.0 +/- 0.1 lbf-in) Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly CLI Lens & Camera Flex - Using the disassembly tool, move along the CLI Lens to lift it up from the bracket.
7. 8. - Using the disassembly tool, carefully disconnect the Camera Flex.
Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly Hinge Flex & LCD Bracket - Using the disassembly tool, carefully disconnect the Hinge Flex from the Flip PCB.
9. 10. - With the disassembly tool, lift up the LCD Bracket to release it from the side hooks. Side Hooks Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly LCD Bracket & Hinge Flex Cable - Lift the bracket away from the Flip PCB. - Careful not to cause damage to the Flex Connectors. 10a. 11. - Remove the Hinge Flex Cable by sliding it away from the Flip Housing slot.
Side Hooks Flex Connectors Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly Receiver & Flip PCB - Using the plastic tool, carefully remove the Receiver as shown.
12. 13. - With the plastic tool, lift up the Flip PCB from the Flip Rear Hosuing.
Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly Main LCD - Using the plastic tool, disengage the Flex Connector for the Main LCD from the Flip PCB. 14. 14a . - With a light push, separate the Main LCD from the bracket. Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly CLI Display - Remove the Kapton Tape covering the CLI Flex Circuit.
15. 15a. - Unlatch the ZIF Connector Catch.
ZIF connector Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly CLI Display - Using the plastic tool, carefully work along the adhesive on the Flex Circuit to separate it from the Flip PCB.
15b. 15c. - Give a light push from behind the CLI Lens to separate it from the PCB.
Adhesive underneath The Flex Circuit Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembly Camera Module - Leverage with the plastic tool in the direction shown.
16. 16a. - Perform the same action on the other side of the Camera Module. - Both action is done to separate the adhesive underneath.
Pemba W510 Service Engineering & Optimization Level 1 / 2 , Rev.1.0 Disassembled Parts