0 évaluation0% ont trouvé ce document utile (0 vote)
85 vues7 pages
The document describes parameters related to the RRC connection setup procedure in 3G networks. Key parameters include T300 and N300 which define a timer started when the UE sends a connection request, as well as parameters like PCPreamble, NInSyncInd, NOutSyncInd, and TRLFailure related to synchronization indications and radio link failure handling. It also outlines timers N312 and T312 used in physical channel setup, and N313, N315, and T313 involved in radio link failure detection.
The document describes parameters related to the RRC connection setup procedure in 3G networks. Key parameters include T300 and N300 which define a timer started when the UE sends a connection request, as well as parameters like PCPreamble, NInSyncInd, NOutSyncInd, and TRLFailure related to synchronization indications and radio link failure handling. It also outlines timers N312 and T312 used in physical channel setup, and N313, N315, and T313 involved in radio link failure detection.
The document describes parameters related to the RRC connection setup procedure in 3G networks. Key parameters include T300 and N300 which define a timer started when the UE sends a connection request, as well as parameters like PCPreamble, NInSyncInd, NOutSyncInd, and TRLFailure related to synchronization indications and radio link failure handling. It also outlines timers N312 and T312 used in physical channel setup, and N313, N315, and T313 involved in radio link failure detection.
DPDCH Power Control Preamble Length (PCPreamble) Successive Synchronization Indication Times (NInSyncInd) Successive Out-of-sync Indication Times (NOutSyncInd) Radio Link Failure Timer Duration (TRLFailure) N312 and T312 N313, N315, T313
T300 and N300 : This timer is started when the UE sends
RRCConnectionRequest. Before the timer expires, it is stopped if the UE receives RRCConnectionSetup or RRCConnectionReject. After the timer expires for N300 Times, the UE directly enters the RRC_IDLE state.
DPDCH Power Control Preamble Length (PCPreamble)
NInSyncInd : Num of Continuous in Sync Ind. The radio link set remains in the initial state until it receives NInsyncInd successive synchronization indications from L1 NOutSyncInd: defines the successive out-of-sync indication times that are required to receive to start the timer TRlFailure. TRlFailure: When the radio link set is in synchronized state, the NodeB will start the timer TRlFailure after it receives NOutsyncInd successive out-of-sync indications. The NodeB should stop and reset the timer TRlFailure after receiving NInsyncInd successive sync indications. If the timer TRlFailure times out, the NodeB will trigger the radio link failure process, and indicate the radio link set that is out-of-sync.
N312 and T312: When the UE starts to set up the dedicated
channel, it starts the T312 timer, and after the UE detects N312 synchronization indications from L1, it will stop the T312 timer. Once the timer times out, it means that the physical channel setup has failed. (T312=6, N312=D1) N313, N315, T313 : After the UE detects N313 successive out-of-sync indications from L1, it will start the T313 timer. And after the UE detects N315 successive sync indications from L1, it will stop the T313 timer. Once the timer times out, the radio link fails. (T313=5/3, N315=D1, N313=D50)
RAB Setup Procedure
UE
Node B
SGSN
RNC GPRS Attach
Uplink Direct Transfer : Activate PDP context request (DCH)
Direct Transfer : Activate PDP context request
RANAP: RAB Assignment Request RRC: Radio Bearer Setup
Radio Bearer Setup Complete
RAB Assignment Response Measurement Control Measurement Control Downlink Direct Transfer : Activate PDP Context Accept (DCH) Direct Transfer: Activate PDP Context Accept Call Established Measurement Report : e4a NBAP: Radio Link Reconfigure Prepare
Admission Control
Radio Link Reconfigure Ready
AAL2SIG:ERQ AAL2SIG:ECF FP: Downlink Sync FP: Uplink Sync Radio Link Reconfiguration Commit RRC: Radio Bearer Reconfiguration (DCH) RRC: Radio Bearer Reconfiguration Complete (DCH)