Académique Documents
Professionnel Documents
Culture Documents
BTS 3601C.
BTS 3012.
BTS 312.
MINI BTS.
TCO reduction method.
Comparison of HUAWEI BTS.
Satellite transmission by HUAWEI.
CONCLUSION
Birth of HUAWEI:
In 1995-started its critical technology on CDMA and ETS
In may 1996-c&c08 platform for MSC and BSC
In sep 5,1997-made the first call (via)GSM
Sep 1966 to may 1997-period of product design
In dec 1997-huawei attented(PT/wireless) network
exhibition in berijing
Based on the customer oriented innovation HUAWEI presents the 4th generation BTS
Technologies
Multiple radio access technology(RATS)convergence
Multiple carrier on one radio carriers(RC)
Convergent single RAN network (all the RAT can be applied to a type of BTS)
Merits
GSM/UMTS/LTE convergence:
Makes the technology choice and network evolution simple
Reduces the investment of building manifold wireless access network
Features :
when BTS capacity reaches max-each sector ensure 20w output power on top of
cabinet
Power will have 1.5 3 db attenuation on the top of cabinet
HUAWEI BTS 30% more area when compared to other ,therefore number of BTS
can be reduced by 30%
High transmitter power-can support high sector load.
Enhancing Integration:
Adopting IP based transmission to reduce the transmission coast:
All IP BTS series adopts-DPD and dohertz power amplification-enables 33% efficiency
BTS power consumption between 48% and 58%(generate less heat in BTS)
Lower power consumption reducing the necessity for air conditioning
If calculated for 100 BTS it can save $280000 of electric bill
HUWAEI BTS adopts modular design and based on advanced all IP platform
After the operator deploys(CDMA 2000/XEV-DO)-BTS can provide VOIP,video
thelephony,mobile broad band access service(UMB)
The BTS can connected using IP over STM-1 and IP over E1.
Network capacity has increased
Transmission usage-50% down
Power consumption reduced by 40
Apart from these thing modern HUAWEI BTS performs the following two function.
APL Algorithm:
The comparison of the two adjacent phase difference counts and the APL algorithm
processing are used to output analog control values.
APL algorithm improve system clock stability and hand over performance.
APL algorithm guarantees the clock anti-jitter capability.
APL algorithm guarantees the long term stability of the BTS clock
frequency from
burst to burst
Frequency C
Frequency D
4,615
millisec.
The above problems are solved in HUAWEI BTS by analyzing the phase lock loop first.
Since the diagram has reached the reference thermal noise-only way to enhance the
performance of reference clock is by lowering the phase discrimination frequency.
GSM adopts 200khz bandwidth- the phase discrimination frequency (N) can neither be too
high or too small for the DCS 1800 system.
f1
f2
f3
f4
It is very difficult to increase the loop bandwidth or to lower the frequency locking
duration
in GSM.To over come this problem the following unique sets are used to remove the
dilemma between the fast conversion and signal quality.
The loop band width is not fixed it varies with needs of system.
When system switches rapidly- the phase lock uses very wide band width.
At this moment the system is in non-operating mode, quality of local oscillator will not
affect the system performance.
The frequency point switches rapidly, the loop band width return to optimal bandwidth
to ensure optimal system performance.
There are two local oscillator deployed ,and a switch is used to select either of the
two local oscillator.
When one oscillator is working, the other locking rapidly to the next needed
frequency point.
The two oscillator switch back and forth through the switch during the interval of time
slot.
By virtue of the unique dynamic loop bandwidth and ping-pong switch technologies the
system is capable of frequency hopping within 25mhz for M900 and 75mhz for M1800
with all frequency hopping index.
HUAWEI BTS experts the advanced ASIC technology to enable the high- speed and reliable
TRX ID identification function.
Advantage:
High density with small footprint.
Various intelligent RF technologies.
Powerful service bearing capability.
2G/3G co-cabinet, low opex and high reliability.
One cabinet support 12TRX or 6 sectors.
Foot print-key factor for site acquisition and expansion of capacity.
HUAWEI BTS 3012 adopts dual density two transceiver are integrated in one board
EnerG BTS can save 20% foot print comparing with traditional.
BTS 3012 can be co-site with old generation and flexible expansion .
High performance with smart RF technologies.
Due to reduction of baseband demodulation limitation decrease of noise figure and
improvement of baseband demodulation algorithm.
BTS 3012 adopts ICC(interferance counteract combining) technology to improve
frequency efficiency.
ICC uses optimized maximal ratio combining(MRC) algorithm-to reject coherent and
adjacent channel interference.
Distributed mode:
BTS 3012 reserves 2u space for BBU(base band unit of WCDMA node B).
Power supply and transmission can be shared by BBU and BTS 3012.
BBU is connected to RRU(remote radio unit of WCDMA node B)by optical fiber
This mode supports S4444 and 12 cells of WCDMA.
Embedded mode:
MTRU and MAFU of WCDMA node B can be installed in DTRU and DAFU slots of BTS
3012.
This mode supports S222 of GSM and 6 Cell of WCDMA.
BTS 3012:Its obvious characteristic is dual density design and to migrate towards 3G.
Application environment:
The indoor large capacity macro cell application supports the high density large traffic cell.
Main features:
Proven RF technology.
Large capacity 12 TRX per rack.
15 TRX at A- bis interface enjoying an E1 interface (15:1).
Various transmission mode, topological structure, including satellite and SDH by use of
E-Abis (enhanced Abis technology).
Integrated optimal transmission-solution for broadband access.
Integrated RF component mode-smooth capacity expansion, stable and reliable
operation.
Supports -48/+24/-220v power supply modes.
Market demands:
APL(advanced clock phase lock)- solves clock jitter problem-HUAWEI uses high precision clock..
Tolerance of up to 1E -4 transmission BER.
Anti flash transmission interruption.
Resists the A-bis interface long delay and supports satellite networking.
Integrating the RF component to save investment.
Intelligent CDU:in case LNA(low noise amplifier)fault,the remote control cutoff the power supply to
bypass the LNA and ensure the normal operation.
Mature and reliable power supply system.
Supporting up to S24/S24/S24 synchronization configuration.
One minute quick start up.
Installation:
Wide application:
BTS
3606/AEV300ROO6
BTS3606C/V300R00 BTS3606AC/V
6
300R006
BTS3812/3806/V100
R003
Full frequency
band(450M/1800M/1900M
/2100M/AWS)
Supporting
band(450mhz/800mhz)
Support all
features of BTS
3606C
Multiple network
technology
1TRX-6carriers
1 single cabinetS12/S12/S12.
1 cabinet S(3/3/3)
RF-subrack-S(6/6/6)
Indoor
BTS,excluding
additional RF
cabinet.S(3/3/3)
1 PA-100W TOC
power(800mhz)
60W(450/1900/100MHZ/A
WZ)
1PA-60W TOC-800mhz.
40W TOC-450mhz
1CSM-Upto 6 FA,support
BCCM(Abis interface
board)
Operating
temperature49,52deg
3)
THANK YOU
In time.All time..