Académique Documents
Professionnel Documents
Culture Documents
By
Ravi kumar R
haranappa koodi
Objectives
Mode of failures
Initiation of the various failure modes
depends on
1.The material properties of the constituents
2.Geometric dimensions,
3.Type of loading. The loading type or
condition determines the state of stress
throughout the composite structure, which
controls the location and mode of failure
FEM analysis
We determine the compressive properties
of the FRP composite by using ANSYIS
and FEM PRO.
Applications
Automobile sector
Construction field
Medical field
Recreation
Marine field
Sports goods
Electrical and electronic industries
Methodology
a) Literature Survey
b) Preparation of Laminates with different fibers.
c) Compression testing of composite laminates
as per ASTM Standards
d) Evaluation compressive properties.
e) Interpretation of the results
f) Conclusions.
References
2. S.J. Kim and S.H. Chang, The relation between compressive strength of
carbon/epoxy fabrics and micro-tow geometry with various bias angles, Structures
Volume, September 2006, Pages 400-407
4. Yasuhide Shindo, , Hitoshi Tokairin et.al, Compression behavior of glasscloth/epoxy laminates at cryogenic temperatures, Cryogenics Volume 39, Issue 10,
12 October 1999, Pages 821-827