Académique Documents
Professionnel Documents
Culture Documents
UNIVERSITY
HARDWARE
PROJECT
BY:
1.K SAI PRABHATH (12BME0467)
2. J S AKHIL CHOWDARY(12BME0625)
3.S HEMANTH KUMAR (12BME0193)
TITLE:
This system can be attached in all types of twowheeler (moped, geared, non-geared, hand geared
bikes) and it is designed based on the working
principle of bikes.
General idea:
A small flat rod is attached and pivoted between
CONSTRUCTION:
The whole construction of this system is
simple and efficient. The arrangement and
position of components makes the system to
function. Each and every component has its
own property and responsibility. The power
obtained from the chain drive is transmitted to
the appropriate component without power loss.
The systematic design of system is made in
order to consume only very low amount of
power initially for few seconds to retrieve the
stand. Then the power consumption does not
occur after retrieving the stand.
PARTS:
Pivot
Pushing lever
Axle
Sprocket (2 nos driver and pinion )
Ratchet wheel
Lifting lever
Box clamp & stand.
Spring
Pivot
MATERIALS
ESTIMATED COST(Rs)
SPROCKET 2 NOS
300
WHEEL CHAIN
200
250
500
PEDAL
150
WELDING COST
300
TOTAL
1700
MANUAL STAND
Manually operated
Advantages:
a. Simple mechanism
b. No need external source
c. No electronic control required
d. Customer safety
e. Can form as a Standard Feature
f. Marginal increase in cost
g. Improved sales : To face competition.
h. Ergonomic friendly
i. Low maintenance : Can be repaired locally
CONCLUSION
Sprocket- side stand retrieve system will definitely
good retrieve system. since the setup is compact it
does not affect the performance of the vehicle. because
the power is obtained from chain drive.
Definitely this system could be used in all type of twowheelers for retrieving the side stand.
This system can be implemented in all types of bikes by
varying size and cost of this system also very low also,
while compare to other system this SPROCKET SIDE
STAND RETRIEVE SYSTEM will be the life saver.