Académique Documents
Professionnel Documents
Culture Documents
and their
Radar and Optical Applications
Jay B Bargeron
Overview
- Personal Background in Metamaterials
- Introduction to Metamaterials
- Definition of Metamaterial
- How Metamaterials work
- Microwave Metamaterials
- Optical Metamaterials
- Conclusions
Personal Background
Introduction to Metamaterials
Introduction to Metamaterials
Electromagnetic waves
- Not much difference between 1kHz (=300km) and 1THz
(=0.3mm)
Why cant optical light (Terahertz frequency) go through walls like
microwaves?
- Material response varies at different frequencies
- Determined by atomic structure and arrangement (10-10 m).
How can we alter a materials electromagnetic properties?
- 1 method is to introduce periodic features that are electrically
small over a given frequency range, that appear atomic at those
frequencies
Introduction to Metamaterials
Whats in a name?
- Meta- means altered, changed or higher, beyond
Why are they called Metamaterials?
- Existing materials only exhibit a small subset of electromagnetic
properties theoretically available
- Metamaterials can have their electromagnetic properties
altered to something beyond what can be found in nature.
- Can achieve negative index of refraction, zero index of
refraction, magnetism at optical frequencies, etc.
Definition of Metamaterial
- Metamaterial coined in the late 1990s
- According to David R. Smith, any material composed of periodic,
macroscopic structures so as to achieve a desired electromagnetic
response can be referred to as a Metamaterial
-(very broad definition)
-Others prefer to restrict the term Metamatetial to materials with
electromagnetic properties not found in nature
- Still some ambiguity as the exact definition
- Almost all agree the Metamaterials do NOT rely on chemical/atomic
alterations.
r r
r r (e
)(e
1/ 2
(e j / 2 )(e j / 2 ) e j 1
Microwave Metamaterials
Early metamaterials relied on a combination of Split-ring resonators
(SSRs) and conducting wires/posts
Microwave Metamaterials
Other approaches for fabricating microwave metamaterials have also
been developed
- Transmission line models using shunt inductors for affecting r
and series capacitors for affecting r. This method, however, is
restrained to 1D or 2D fabrication
Microwave Metamaterials
Conducting wires/posts can be replaced with loops that mimic an LC
resonating response. SRRs are still required to affect r.
Microwave Metamaterials
Proven areas of Microwave Metamaterials:
Microwave cloaking by
bending EM rays using
graded indices of refraction
Currently limited to relatively
narrow bandwidths and
specific polarizations
Limited by resonant frequency
response
Microwave Metamaterials
Proven areas of Microwave Metamaterials:
Sub-wavelength antennas
- n = 0 in metamaterial
- capable of directionality
- same antenna can be used for
multiple frequency bands
- currently used in Netgear
wireless router (feat. right) and
LG Chocolate BL40
the
Microwave Metamaterials
Tuneable metamaterials:
Consider a 2-D metamaterial, with series capacitance to affect its EM
response
- This capacitance can be tuned via ferroelectric varactors,
affecting the index of refraction of the material
The size of the split in SRRs can
also be adjusted, from fully closed
to fully open (see Fig. right)
Capable of achieving phase
modulation of up to 60 degrees
Applications in phased-arrays,
beam forming, and beam scanning
Microwave Metamaterials
Planar microwave focusing lens
Researchers at University of Colorado have achieved a planar array
for focusing microwave radar
-Though not touted as metamaterial, meets the requirements
under the broad definition of metamaterials.
The Perfect Lens
J.B. Pendry theoretically described how a rectangular lens with n = -1
could make a perfect lens capable of resolving sub-wavelength
features.
-Researchers in China, using a planar Transmission Line type of
metamaterial to focus a point source (480 MHz) , managed to
achieve sub-diffraction focusing down to 0.08)
Optical Metamaterials
Fabrication/Design Challenges for optical metamaterials:
Smaller wavelength = smaller features
- Coupling between elements becomes more serious
Optical Metamaterials
Most research on optical metamaterials has been at the theoretical
stage
- Mathematically characterizing nanoscale plasmonice effects.
- Computer simulations of proposed designs.
Relatively little work has been done with physically realized optical
metamaterials
Optical Metamaterials
Rare example of 3D optical metamaterial. Gold nanostructures with
70nm spacing between layers.
Optical Metamaterials
Experimental measurements of the previous optical metamaterial
Conclusions
Introduction of metamaterials in 1990s opened new possibilities in
electromagnetics.
Successful implementation of metamaterial technology in the
microwave spectrum.
Inherent difficulties exist in fabricating optical metamaterials
Most work to date related to modeling proposed designs
Little work, so far, on successful application of optical metamaterials
Fin
Questions???