Académique Documents
Professionnel Documents
Culture Documents
PROJECT MEMBERS:
SUPRITI BANDOPADHYAY(08524)
PARAMITA SEN(08545)
GARGI BHATTACHARYA(08548)
PROJECT GUIDE:
INFRARED
RX
FINGER
AMP &
FILTER
LCD
MICROCONTROLLER
INFRARED
TX
FILTER CIRCUIT:The pulse rate has very low frequency(1.17 Hz for 70bpm)
For this purpose we can use SALLEN-KEY Low Pass Filter
We consider R1=R2 and the op amp stage
is a unity gain follower (RB=short and RA=open).
Designing a 2-pole Butterworth filter
requires just a few steps.
1. Choose a cutoff frequency fo (Hz).
2. Pick a convenient cap value C2 between 100pF and 0.1 uF.
3. Make C1 = 2 x C2
4. Calculate R1 = R2 = 0.707 / (2 fo C2)
MICROCONTROLLER:
CONCLUSION: