Académique Documents
Professionnel Documents
Culture Documents
solution
INDEX
1)
2)
3)
4)
5)
Introduction
Abut as
About products
Type of products
Machines used in Couplers
process
6) Benefits of rebar couplers
7) Parallels threaded rebar coupler
8) Benefits of mechanical splicing
systems
9) Merits using mechanical splicing
systems
10)Product features of rebar couplers
INTRODUCTION
ABOUT US
ABOUT PRODUCT
TYPE OF PRODUCTS
REGULAR REBAR
COUPLER
REBAR REDUCER
COUPLER
REBAR TAPER
COUPLER
REBAR
TERMINATOR
1) Cutting
2) Cold forging
3) Threading
General Specification:
Couplers are individual market a allow full traceability of the material.
Tensile failure guaranteed to occur way from the joint.
No reduction of the ductility of the reinforcing bar.
No reduction of the nominal cross section area of the patent.
Parallel thread system.
Codes require that mechanical splices deliver higher performance than typical design
lengths for lap splices. This is typically 125% to 150% greater capacity* provided by the
mechanical splice versus the lap splice.
Lap splicing increases rebar congestion at the lap zone and is one of the major causes
for forming rock pockets and voids in the concrete. Mechanical splices eliminate these
congestion problems and will make the overall job more cost effective through minimized
job site problems.
Building codes stipulate a steel ratio of under 8% and this makes it nearly impossible to
Recently after experiencing all this scenarios, More and more engineers are
specifying mechanical rebar connections over lap splices. Theyve found that
mechanical connections afford a reliability and consistency that cant be
found with lap splicing.
25
40
2.0
20
32
54
2.5
25
42
64
3.0
32
50
78
3.0
36
60
86
3.0
40
63
96
3.0
CONTACT DETAIL
Head Office:
85/10, Creekside,
Vikroli (E),Mumbai-400079
+91 8689895432
techcraftengineering01@gmail.com
Factoary:
Mechanical Rebar Splicing solution
Techcraft Engineering
Opp. Universal Business Park,
Sakivihar Road, Sakinaka,
Andheri (E), Mumbai - 400072