Académique Documents
Professionnel Documents
Culture Documents
ABSTRACT:
Heart rate monitor was used by a person who cares about their heart to ensure
that they have a normal heart rate. The early detection of the abnormal heart rate can
help to prevent from the serious disease. In the sport field, the heart rate monitor is
needed to determine the range of heart rate. This range of heart rate should be
compatible with the exercise done by an athlete to get an optimum exercise and to
prevent from serious injury and this system is also to find the peoples who takes
drugs or alcohol in sport field .here IMAC is used to communicate the data between
PC and MC. so output status can be displayed in PC.
Here we are using heart beat sensor to find the heart beat level, pressure sensor
is to check the blood pressure level. This sensed information will be sent to ADC,it
will convert analog to digital ,then it will given to MC ,if the values of heart beat and
pressure level exceeds more than normal then LED will glow.3 LEDs are used to
find the level of heart beat and pressure. Green LED will indicate if its normal
level ,Yellow LED will indicate, if its high level, Red LED will indicate if its danger
level. Finally we will get the output from PC.
Evidential Breath Testing (EBT) is the most common form of alcohol testing in
the workforce. The device is operated by a trained Breath Alcohol Technician (BAT).
having the donor blow into the EBT mouthpiece for 6 seconds or
until adequate amount of breath has been obtained.
MICROCONTROLLER
HEART BEAT SENSOR
PRESSURE SENSOR
DRUG DETECTION SENSOR
LEDS
PC
SMAC PROTOCOL
KEIL COMPILER
PROLOAD PROGRAMMER
VISUAL BASIC
The ability to monitor the health status of elderly patients or patients undergoing
therapy enables significant advantages in terms of both cost and comfort of the
subject. However, such non-clinical applications of biomedical signal monitoring
require various improvements not only in terms of size and comfort of the acquisition
systems, but also in terms of their power dissipation.
The research activity is concerned with the development of a novel wearable
biomedical signal sensor device for monitoring health conditions at home. The
wearable monitoring system consists of two subsystems: firstly, a wearable data
acquisition hardware, where the sensors for acquiring the biomedical parameters are
integrated, and secondly, a remote monitoring station placed separately and connected
to internet for telemedicine applications.
The physiological parameters that are monitored with the proposed instrumented
wearable belt are electrocardiogram (ECG), heart rate (HR) derived from ECG signals
by determining the RR intervals, body temperature, respiratory rate, and three axis
movement (acceleration and position) of the subject measured using an accelerometer.
In order to design and construct the signal acquisition circuits efficiently and simply,
modular design concept is adopted in this research. Three basic high quality and
flexible modules for signal conditioning are designed and assembled together for
satisfying each sensor. Human biomedical parameters can be registered and analyzed
continuously during home work activities.
The system does not prevent the noises in the E.C.G waveforms.
The health conditions of the patient is not monitored when the patient is
mobile/playing.
Lightweight and easily worn so that the athlete feel comfortable and will
not impeded their Activities.
Daoming Z. and Branko C. Monitoring Physiological signals during
running exersice, Proc. of 23rd Annual EMBS Int. Conference, 2001. pp. 33323335.
Chen, Z., Hu, C.,Liao J, Liu S., Protocol architecture for wireless body
area network based on nRF24L01, IEEE International Conference on Automation
and Logistics, 2008. pp. 3050-3054.