Académique Documents
Professionnel Documents
Culture Documents
Module Operation
ISSUE and
1.0
Maintenance
3 Port Configuration
Login via
serial port quit
or TELNET
BTV
BTV mode
MA5600(config-btv)#
test
TEST mode
MA5600(config-test)#
diagnose
Diagnose mode
MA5600(config-diagnose)#
MA5600 command line mode
Confidential Security Level:
Command Line Basis
MA5600#display?
Key word matching
MA5600#conf<space> ---- MA5600#configure
Chinese/English language switching
MA5600#Switch language mode
Access history commands
Access the previous history command: "Ctrl +P"
Access the next history command: "Ctrl +N"
3 Port Configuration
ADEF
SCU MA5600
the user
Connection use: Directly connect to Serial port 1
(depending on actual conditions)
Port setting: 9600bit/s, 8 data bits, no parity check
1 suspension bit, no flow control
Terminal type: VT100 or automatic test
Confidential Security Level:
Setting up Configuration Environment
ADEF
workstation
LAN SCU MA5600
ETH
LAN
CON
ETH
MON
ADEF
Telnet terminal WAN
SCU MA5600
LAN
WAN remote Telnet configuration mode
Remote router
workstation
User login
Via the Console
After correctly connecting the hyper terminal, press Enter key
according to the prompt to enter the configuration environment
Via Telnet
According to the prompt, enter correct user name and password to
enter the configuration environment
Out-band NM configuration
MA5300(config)#interface meth 0
Enter the external network interface port mode.
MA5300(config-if-meth0)#ip address 10.71.53.2
255.255.255.0
Configure the IP address of the external network interface
MA5300(config-if-meth0)#undo shutdown
Activate the external network interface
A 0 0
S
D
M
E
B
F FE0/7/0
7 7
In-band NM configuration
MA5600(config)#vlan 1000 mux
Add NM VLAN
MA5600(config)#interface vlan-if 1000
Enter the Vlan-interface 1000 configuration mode .
MA5600(config-if-vlanif1000)#ip address 10.10.20.2
255.255.255.0
Configure the equipment with a management address, which should
be configured on vlan virtual interface 1000 .
MA5600(config)#port vlan 1000 0/7 0
Add the upstream port
Board Management
Query a Board MA5600#display board 0
MA5600#display board 0/2
Add a board(ADEF) MA5600(config)#board add 0/1 ADE
Confirm a Board MA5600(config)#board confirm 0
Delete a board MA5600(config)#board delete 0/2
Reset a Board MA5600(config)#board reset 0/1
Equipment management
Reset the system MA5600(config)#reboot system
Show CPU Occupancy Ratio MA5600>display cpu 0/7
Display the system time MA5600> display time
Set the system time
MA5600#display saved-configuration
Query the current configuration of the MA5300 intelligent IP
integrated access equipment
MA5600#display current-configuration
query the configuration commands of fault restoration.
MA5600#display unresumed-configuration
Save the current configuration MA5600#save
Erase the configuration files in the Flash MA5600#erase
flash data
Confidential Security Level:
ADSL Port Configuration
3 Port Configuration
CON
ADEF SPLT
ETH
MON
SCU MA5600
MODEM PC
Through the bit allocation information, you can get to know the
number of bits carried by every ADSL2+ tone (totally 512
tones), and analyze the performance of the line.
MA5600(config-if-adsl-0/2)#display line bit-allocation 61
Upstream bits per frame: 312
Downstream bits per frame: 5616
0 0 9 11 *********** 14 14 **************
10 12 ************ 15 14 **************
6 6 ****** 11 12 ************
7 9 ********* 12 13 ************* 31 6 ******
8 10 ********** 13 14 **************
CON
SHEA
ETH
MON
SCU MA5600
MODEM
3 Port Configuration
IP network
To establish the above connections,
do as follows:
A
Add VLAN 9 D
E
Run the command port vlan on F
0/7/0
0/7/1
MA5600_A to add a port on
MA5600_B and a port on MA5600_A MA5600-A SCU
A
to a standard VLAN. D
E
F 0/7/0
0/7/1
MA5600-B SCU
ADEF
ADEF
Smart VLAN
ADSL link configuration
MA5600
User User User...User
vlan 20
After the above configuration, the PCs can visit Internet but
can not ping each other.