Académique Documents
Professionnel Documents
Culture Documents
Gunaratna
Admission No. : EP/13/9307
Course : National Diploma in Engineering
Sciences
Field : Electrical Engineering Power
Training Program : GIT
Establishment :Rotax (Pvt) Ltd-Colombo
Duration : From 21/03/2016 To 28/10/2016
INTRODUCTION
Rotax (Pvt) Ltd. was founded in 1963 by the late Mr. John
Roche.
Email:RTX@rochegroup.lk
Roche
Engineering(Pvt)Ltd
Roche
Projects(Pvt)Ltd
04
Wathupitiwala.
Gloves
Ear plug
Goggles Safety
fire-extinguisher
Panel Wiring Accessories
Din rail
Wire end cap
Terminal block
Cable ID
Busbar isolator number Comb busbar
Insulated Terminal
bus bar
Cable tie
Main Components Used in Panel
Board Wiring
Power analyzer
Core balance
Main Components Used in Panel
Board Wiring
relay
voltmeter
ammeter contactor
Main Components Used in Panel
Board Wiring
Type 2 SPD
Type 3 SPD
SPD PANEL BOARD
This device is connected in parallel on the power supply
circuit of the loads that it has to protect.
Advantages;
Increased Reliability
Speed Variations
Soft Starting
Extended Machine Life and Less Maintenance
INSTALATION ACCESSORIES
185mm2 /CU/4C/XLPE/SWA/PVC
PVC sheath
Wire steel amour
XLPE Insulation
Cu conductor
bedding
CABLE JOINT
Cable joints can be divided in to another tree parts i.e. LT cable
joints , HT cable joint, End terminations .
LV cable joints
The straight cable joints are used, when we need a cable longer
than its present length for a construction work.
T- Joints are used for to get another supply line from the
present supply line.
When we doing a cable joint we want to joint three phases and
the neutral correctly.
Technical requirement of amour is continued by using earth
tape.
Exothermic Welding
Exothermic welding process is a molecular chemical reaction
between copper oxide and aluminum generates a
tremendous superheat with molten metals reaching
approximately temperature of 2600 C.
Exothermic Welding
Connections are the weak point of all electrical circuits
and especially earthing circuits subjected to aging and
corrosion. The capacity of an earthing circuit to protect
the safety of personnel depends on the quality of the
connections made.