Académique Documents
Professionnel Documents
Culture Documents
Phillips
Pozidrive
clutch
Torx
Used to
remove
stubborn
screws
insert right
size bit turn in
direction you
want to go and
strike with a
hammer.
Offset
Screwdrivers are
classed in size of shank
such as 3/16, 1/4,
5/16, and length of
shank such as 2", 4", 6".
Some manufactures
take length of shank and
handle. Normally just
the shank is measured.
Needle nose
Aligning punch
sometimes called a
Long Taper or Line
up
Mushroomed chisels
Rubber Mallet
Brass Hammer
Plastic Tipped
Combination Wrench
One end open, one end boxed
both the same size can be
different lengths
Sockets
Sockets come in many sizes with different openings.
6 pt. & 12 pt. Are the most common
8 pt or double square are used on square nuts.
Square (4 sided) sockets are also used in special
applications
Swivel Ratchet
sliding T bar
beam
Shapes of files
putty knifes
Gasket scrapers
razor blades
(not shown)
Safety Hints
Tap wrench
Die Stock
Three
jaw
ring compressors
Use for install piston into
cylinder
ring expanders
Use for Install and
remove Piston ring
Brake Spoon
Use for adjust brake
clearance
Grease Gun
Test Light
Use to test for power