Vous êtes sur la page 1sur 34

Probe 2.

2 User Guideline for DT


Drive Test Plan

i. Hardware Configuration

ii. Test Plan Configuration

iii. Appendix
i. Hardware Configuration
Add UE and configure the port
Add UE and configure the port
Connect Device
ii. Drive Test Plan Configuration
Add Test Item for MS
Short Call
More description about Parameter in short call
•Setup Timeout (now default setting is 45s)
 It is the maximum allowed duration from Call Attempt to
CallSetup
 Long “Setup timeout” will not affect the CallSetupTimeDelay
which is the actual duration from CallAttempt to CallSetup,
Generally, it is around 4~5s
If “Setup Timeout” be set to a short one, such as 10s, 15s, more
possibility of CallSetupFails will happen to the UE.

Call Start Mode


Default set to Idle, means Probe will start a new call only when
UE is in idle mode.
If UE is not in idle mode, Probe will send hung up command
after “Wait Time”

Wait Time
When Probe want to initiate a call, if Probe found UE is not in
idle mode, Probe will wait for “Wait Time“, then send hung up
command. And after Exception Interval time,Probe will try to
initiate a call again.
Long Call
FTP Download

Disconnection Mode
Disconnected after transfer Completed
means Probe will hung up (Deactive PDP) after file download complete each time. If KPI
“PDP activation success rate” is required, Disconnection Mode should be “Disconnect
after transfer Completed”.
Keep Connect
Probe will not hung up, so only a few PDP activation procedure will happen, and can’t
used to get “PDP activation success rate”. And need configure Dial test item before
FTP Download.
FTP Download
If Disconnection Mode set as Keep Connected, need configure Dial before FTP
test item.
FTP download
• MS side: Settings -> connectivity -> Network Access Point -> Access point
name to set the APN of your network.For example:”Vinternet.com” for
Datacom Project.
• Laptop: Fire wall should be turn off, all the program which may using
internet services should be shut down.
• Battery should be well charged for both MS and laptop.
• In Probe, View -> Information -> “Ftp info” ,see what happened .
• In Probe, “Test plan” -> “FTP download ”, we should guarantee that
username, password ,and file name is correct, Don’t change other
parameter in the ftp download page.
MOS Test
Idle Mode setting
Appendix 1.GPRS Setting for UE120E

Step 1: settings->Select
Step 2: Setting->Connectivity->Select
Step 3: Connectivity->Network Access Point->Select
Step 4-Network Access Point
Options->Rename ( For example,APN name as Rcom)
Step 5 – Input APN Name
Step 6- Go Back to main menu->Select Browser
Step 7 – Select Internet Settings
Step 8 – Select Profile
Step 9 – Select Profile
Step 10 – Select the Created APN Name->
Go back to Browser Menu
Step 11 – Go back to Browser-> Enter URL
Step 12 – Enter URL->http://www.google.com
Step 13 – Wait for the connection
Step 14- You can see the web page
Appendix 2:Setting the APN in the operating system
Setting the APN in the operating system
Setting the APN in the operating system
34
www.huawei.com Huawei confidential, 2007-06

Vous aimerez peut-être aussi