Académique Documents
Professionnel Documents
Culture Documents
Foils
Sheetmetal
Design V5R8
Update
Version 5 Release 8
February 2002
EDU-CAT-E-SMD-UF-V5R8
Targeted audience
Current V5R7 users of Sheet Metal
Prerequisites:
.5 day Catia V5R8 Fundamentals
:
Copyright DASSAULT SYSTEMES 2002
Table of Contents
Upon completion of this lesson, you will be able to identify and apply the new
capabilities found within the Generative Sheet Metal workbench to create…
New Wall on Edge Definition panel with the ability to have a wall on
edge created with reference in height or length.
Height = the
orthogonal
projection from
the top or bottom
of the wall on
edge to the
reference wall.
Length = the
absolute value
of the wall on
edge without
bend.
Copyright DASSAULT SYSTEMES 2002
Walls on an Edge
Select the edge to
2 attach the wall too Key in the new values and select a
3
dimension options
V5R8
Select the
wall on edge
icon
4 To reverse sketch
profile direction,
select this button
6
Select OK to
create the wall
Ability to create an extrusion with a sketch made of lines and arcs of circle,
provided there are no tangency discontinuities between the different
elements.
Key in the new values and select a
Select the 3
dimension options
1 Extrusion
icon
4 Select OK to create
Upon completion of this lesson, you will be able to identify and apply the
new capabilities found within defining walls on existing parts
Compulsory walls - are faces from which the walls are to be generated when there might be an
ambiguity. For example, if the initial part is a box, you will need to select two opposite inner faces
and outer faces on the other two sides of the box, in order to avoid overlapping when generating the
walls.
Select the
Recognize
icon
4
The thickness of the shell and the radius of the The Tree is
Fillet are taken as the default values in the updated with the
SheetMetal Parameters. New Walls
5
Select the
Unfold icon
Upon completion of this lesson, you will be able to identify and apply the new
capabilities found within the Generative Sheet Metal workbench to create
bends and flanges
The “Left” and “Right” text to visualize the different bend extremities
Creating Corners
Creating Chamfers
2
1 Select the Select the edge(s)
Corners
icon
You have two ways to
create Corners: select
each edge or select the
“Select All” button
3
Key in the radius
value
V5R8
4 Select OK
Two Modes:
2
1 Select the Select the type:
Chamfer
icon You have two ways to
create Chamfers: select
Sharp edge or Weld icon
3
Select the edge(s)
4
Select options and
Key values
V5R8
5 Select OK
V5R8
4
Select OK to validate
In this course you have seen the new or enhanced capabilities within the
Generative Sheet Metal workbench for V5R8 in: