Académique Documents
Professionnel Documents
Culture Documents
ACCREDITATION OF
MATERIALS ENGINEERS
I. CONTRACTORS’/CONSULTANTS’ MATERIALS
ENGINEERS
Department Order No. 98, Series of 2016, “Revised
Guidelines on the Accreditation of Contractors’/Consultants’
Materials Engineers”
Minimum Requirement
• As a minimum requirement for accreditation of materials engineers, the
applicant must be a registered and licensed Civil Engineer. This
minimum requirement may be extended to foreign applicants.
Written Examination
• A written examination shall be administered to all the applicants. The raw
score obtained in the examination shall be converted to percentage (100%
maximum) to obtain the total score for accreditation.
I. CONTRACTORS’/CONSULTANTS’ MATERIALS ENGINEERS
1.0 CRITERIA FOR ACCREDITATION
Practical Examination
• Practical examination shall be administered to an accredited Materials
Engineer I applying for upgrading to Materials Engineer II. It shall be
conducted at the Bureau of Research and Standards (BRS) Office in
Quezon City or at a selected/identified DPWH Regional Office.
• Accreditation Examination
An accreditation examination shall be administered to all
qualified applicants. Two (2) examinations per year to be
held on the second Saturday of March and September will be
given simultaneously in Manila, Cebu City and Davao City.
-Written Examination
Applicants who got a score of 60% and above are automatically accredited as
Materials Engineer I.
- Practical Examinations
(For upgrading from Materials Engineer I to Materials II only)
I. CONTRACTORS’/CONSULTANTS’ MATERIALS ENGINEERS
• Laboratory - 50%
Soils - 12.5%
Cement - 12.5%
Asphalt - 12.5%
Concrete Miscellaneous - 12.5%
The applicants will be required to demonstrate the actual sampling
and testing procedures of construction materials in accordance with
the existing standards to determine their testing capability.
I. CONTRACTORS’/CONSULTANTS’ MATERIALS ENGINEERS
• Field - 50%
Project Evaluation - 35%
Panel Interview - 15%
The applicants will be required to demonstrate the actual
implementation of quality control supervision and decision making in
the project.
I. CONTRACTORS’/CONSULTANTS’ MATERIALS ENGINEERS
• DPWH engineers who took the DPWH Materials Engineers examination and
got a score of 60% and above but are separated from government service
can be accredited as Contractors’/Consultants’ Materials Engineers I,
without undergoing practical examination for Contractors’/Consultants’
Materials Engineers.
I. CONTRACTORS’/CONSULTANTS’ MATERIALS ENGINEERS
5.0 CRITERIA FOR THE ASSIGNMENT OF CONTRACTORS’/
CONSULTANTS’ MATERIALS ENGINEERS
Classification Limits of Assignment
Non-accredited materials engineers may be assigned to three (3) projects, with an aggregate cost
of P15.0M or below.
II. DPWH MATERIALS ENGINEERS ACCREDITATION
- Duly accomplished application form for examination that can be secured from
the DPWH Regional Office, with attached copy of valid Professional Regulation
Commission (PRC) identification card (ID). Application form shall be
submitted to the Bureau of Research and Standards (BRS) at least one (1)
month before the scheduled examination.