Académique Documents
Professionnel Documents
Culture Documents
1. 2
2. 3
3. 3 if ip subnet-zero is enabled
4. 4
5. 6
6. 8
11/01/18 Page 1
Cisco 3 - Classless Module 1
1. 2
2. 3
3. 3 if ip subnet-zero is enabled
4. 4
5. 6
6. 8
11/01/18 Page 2
Cisco 3 - Classless Module 1
Which of the following statements are true regarding RIP v1 and v2? (Choose
three.)
11/01/18 Page 3
Cisco 3 - Classless Module 1
Which of the following statements are true regarding RIP v1 and v2? (Choose
three.)
11/01/18 Page 4
Cisco 3 - Classless Module 1
11/01/18 Page 5
Cisco 3 - Classless Module 1
11/01/18 Page 6
Cisco 3 - Classless Module 1
Router1 and Router2 shown in the topology have been configured with the
no ip subnet-zero command. Which of the following valid VLSM network
numbers could be used for the serial link between Router1 and Router2?
(Choose two.)
1. 192.168.1.0/30
2. 192.168.1.4/30
3. 192.168.1.8/30
4. 192.168.1.96/30
5. 192.168.1.138/30
6. 192.168.1.190/30
11/01/18 Page 7
Cisco 3 - Classless Module 1
Router1 and Router2 shown in the topology have been configured with the
no ip subnet-zero command. Which of the following valid VLSM network
numbers could be used for the serial link between Router1 and Router2?
(Choose two.)
1. 192.168.1.0/30
2. 192.168.1.4/30
3. 192.168.1.8/30
4. 192.168.1.96/30
5. 192.168.1.138/30
6. 192.168.1.190/30
11/01/18 Page 8
Cisco 3 - Classless Module 1
11/01/18 Page 9
Cisco 3 - Classless Module 1
11/01/18 Page 10
Cisco 3 - Classless Module 1
Refer to the network shown. How will Router1 summarize and advertise the
four networks attached to its Ethernet ports?
1. 172.16.16.0/20
2. 172.16.19.0/20
3. 172.16.16.0/20 and 172.16.19.0/20
4. 172.16.16.0/22
5. 172.16.18.0/24
6. 172.16.0.0/24
11/01/18 Page 11
Cisco 3 - Classless Module 1
Refer to the network shown. How will Router1 summarize and advertise the
four networks attached to its Ethernet ports?
1. 172.16.16.0/20
2. 172.16.19.0/20
3. 172.16.16.0/20 and 172.16.19.0/20
4. 172.16.16.0/22
5. 172.16.18.0/24
6. 172.16.0.0/24
11/01/18 Page 12
Cisco 3 - Classless Module 1
In the network shown in the graphic, three bits were borrowed from the host portion of
a Class C address. How many valid host addresses will be unused on the three point-
to-point links combined if VLSM is not used?
1. 3
2. 4
3. 12
4. 36
5. 84
6. 180
11/01/18 Page 13
Cisco 3 - Classless Module 1
In the network shown in the graphic, three bits were borrowed from the host portion of
a Class C address. How many valid host addresses will be unused on the three point-
to-point links combined if VLSM is not used?
1. 3
2. 4
3. 12
4. 36
5. 84
6. 180
11/01/18 Page 14
Cisco 3 - Classless Module 1
A Class C address has been assigned for use in the network shown in the
graphic. Using VLSM, which bit mask should be used to provide for the number
of host addresses required on Router A, while wasting the fewest addresses?
1. /31
2. /30
3. /29
4. /28
5. /27
6. /26
11/01/18 Page 15
Cisco 3 - Classless Module 1
A Class C address has been assigned for use in the network shown in the
graphic. Using VLSM, which bit mask should be used to provide for the number
of host addresses required on Router A, while wasting the fewest addresses?
1. /31
2. /30
3. /29
4. /28
5. /27
6. /26
11/01/18 Page 16
Cisco 3 - Classless Module 1
1. 32-bit address
2. next hop router interface
3. subnet mask
4. unicast host address
5. Layer 2 address
11/01/18 Page 17
Cisco 3 - Classless Module 1
1. 32-bit address
2. next hop router interface
3. subnet mask
4. unicast host address
5. Layer 2 address
11/01/18 Page 18
Cisco 3 - Classless Module 1
1. 172.21.136.0/21
2. 172.21.136.0/20
3. 172.21.136.0/22
4. 172.21.136.0/2
11/01/18 Page 19
Cisco 3 - Classless Module 1
1. 172.21.136.0/21
2. 172.21.136.0/20
3. 172.21.136.0/22
4. 172.21.136.0/2
11/01/18 Page 20
Cisco 3 - Classless Module 1
An additional subnet is required for a new Ethernet link between Router1 and
Router2 as shown in the diagram. Which of the following subnet addresses
can be configured in this network to provide a maximum of 14 useable
addresses for this link while wasting the fewest addresses?
1. 192.1.1.16/26
2. 192.1.1.96/28
3. 192.1.1.160/28
4. 192.1.1.196/27
5. 192.1.1.224/28
6. 192.1.1.240/28
11/01/18 Page 21
Cisco 3 - Classless Module 1
An additional subnet is required for a new Ethernet link between Router1 and
Router2 as shown in the diagram. Which of the following subnet addresses
can be configured in this network to provide a maximum of 14 useable
addresses for this link while wasting the fewest addresses?
1. 192.1.1.16/26
2. 192.1.1.96/28
3. 192.1.1.160/28
4. 192.1.1.196/27
5. 192.1.1.224/28
6. 192.1.1.240/28
11/01/18 Page 22